Abstract:Ag-Cu-Cl/BaCO3 catalysts with different Cl and Cu loadings, prepared by the reduction deposition impregnation method, were investigated for gas-phase epoxidation of propylene by molecular oxygen and characterized by X-ray diffraction, X-ray photoelectron spectroscopy and O2 temperature programmed desorption. Ag-Cu-Cl/BaCO3 catalyst with 0.036 wt% Cu and 0.060 wt% Cl exhibited the highest catalytic performance for gas-phase epoxidation of propylene by molecular oxygen. A propylene oxide selectivity of 83.7% and propylene conversion of 1.2% were achieved under the reaction conditions of 20% C3H6-10% O2-70% N2, 200 °C, 0.1 MPa and 3000 h−1. Increasing the Cl loading allowed Ag to ensemble easier, whereas changing the Cu loading showed little effect on Ag crystallite size. The appropriate Cl loading of Ag-Cu-Cl/BaCO3 catalyst can reduce the dissociation adsorption of oxygen to atomic oxygen species leading to the combustion of propylene to CO2, which benefits epoxidation of propylene by molecular oxygen. Excessive Cl loading of Ag-Cu-Cl/BaCO3 catalyst decreases propylene conversion and propylene oxide selectivity remarkably because of Cl poisoning. The appropriate Cu loading of Ag-Cu-Cl/BaCO3 catalyst is efficient for the epoxidation of propylene by molecular oxygen, and an excess Cu loading decreases propylene oxide selectivity because the aggregation of Cu species increases the exposed surfaces of Ag nanoparticles, which was shown by slight increases in atomic oxygen species adsorbed. The appropriate loadings of Cu and Cl of Ag-Cu-Cl/BaCO3 catalyst are important to strike the balance between molecular oxygen and atomic oxygen species to create a favorable epoxidation of propylene by molecular oxygen.

Gas Phase Epoxidation Of Propylene Over Amodified Ag/Alpha-Al2o3 Catalyst

Epoxidation of Propylene by Molecular Oxygen over the Ag–Y2O3–K2O/α-Al2O3 Catalyst

Direct epoxidation of propylene by molecular oxygen over Y2O3 and K2O-promoted Ag/α-Al2O3 catalyst

Promotional Effect of Y2O3 on the Performance of Ag/α-Al2O3 Catalyst for Epoxidation of Propylene with Molecular Oxygen

Epoxidation of propylene to propylene oxide catalyzed by μ-oxo-bismetalloporphyrins

Role of Chlorohydrocarbon in Increasing Selectivity of Propylene Oxide over Ag–Y2O3–K2O/α-Al2O3 Catalyst for Epoxidation of Propylene by Molecular Oxygen

Gas-Phase Epoxidation of Propylene by Molecular Oxygen over Ag-Cucl2/Baco3 Catalyst with Low Cucl2 Doping: Catalytic Performance, Deactivation and Regeneration

Propylene oxidation to propylene oxide over Ag/TS-1 catalyst in the gas phase

In Situ FT-IR Study on the Direct Gas Phase Epoxidation of Propylene over Ag-MoO3 Catalyst

Epoxidation of Propylene by Molecular Oxygen over Modified Ag–MoO 3 Catalyst

Gas-phase Epoxidation of Propylene by Molecular Oxygen over Ag-Cu-Cl/BaCO3 Catalyst: Effects of Cu and Cl Loadings

Direct Epoxidation of Propylene with Molecular Oxygen over Ag–MoO3/ZrO2 Catalyst

Epoxidation of Propylene over Ag/MgO Catalysts Modified Na~+ and Halogen Anions

Gas-phase epoxidation of propylene over Ag/Ti-containing catalysts

Effects of Preparation Conditions and Reaction Conditions on the Epoxidation of Propylene with Molecular Oxygen over Ag/TS-1 in the Presence of Hydrogen

Study on Ag-Mo Catalyst for Direct Vapor-Phase Epoxidation of Propylene by Molecular Oxygen

Gas-phase oxidation of propylene to propylene oxide over modified Ag/TS-1 catalysts

Gas Phase Selective Propylene Epoxidation over La2O3-Supported Cubic Silver Nanoparticles

Modification of Ag-MoO3/ZrO2Catalyst with Metallic Chloride for Propylene Epoxidation by Molecular Oxygen

Performance, Reaction Pathway, and Pretreatment of Au Catalyst Precursor in H2/O2 Atmosphere for the Epoxidation of Propylene

Effect of preparation condition on performance of Ag–MoO3/ZrO2 catalyst for direct epoxidation of propylene by molecular oxygen