Abstract:In this work a series of supported Ag catalysts was studied for propylene epoxidation with molecular oxygen as the oxidant. It was found that α-Al2O3 and CaCO3 were suitable supports for propylene epoxidation and that on the latter Ag particles between 400 and 700nm gave the highest selectivity to propylene oxide (PO). Ball-milling treatment of the CaCO3 catalyst and promotion with NaCl resulted in improved catalytic performance. The highest PO selectivity (45%) was obtained on a ball-milled catalyst with a silver loading of 56wt.% supported on CaCO3 and promoted with 1wt.% NaCl (Ag(56)–NaCl(1)/CaCO3). The catalysts were tested with reactant flow rates of C3H6:O2:He=5:10:15cm3min−1, a gas hourly space velocity (GHSV) of 1800h−1, a reaction pressure of 0.3MPa, and a reaction temperature of 533K (260°C). Addition of 500ppm of ethyl chloride (EtCl) to the reactant gases enhanced the stability of the Ag(56)–NaCl(1)/CaCO3 catalyst. X-ray diffraction (XRD) of the Ag(56)–NaCl(1)/CaCO3 catalyst detected the existence of AgCl in the catalyst and ultraviolet–visible (UV–vis) diffuse reflectance spectroscopy confirmed the presence of surface Ag+ species. Scanning electron microscopy showed a roughening of the Ag particles by the ball-milling treatment as well as by the addition of NaCl. The effect of NaCl on the enhancement of the catalytic performance was probably due to both physical and electronic changes in the properties of the catalyst. The NaCl not only helped increase the dispersion of the silver on the CaCO3 support, but also probably increased the quantity of electrophilic oxygen species favorable for epoxidation. In situ UV–vis spectra suggested that the rapid reduction of Ag+ species on the surface of the Ag(56)–NaCl(1)/CaCO3 catalyst could be the cause of a decline in PO selectivity observed during reaction.

Epoxidation of Propylene over Ag/MgO Catalysts Modified Na~+ and Halogen Anions

Epoxidation of propylene to propylene oxide catalyzed by μ-oxo-bismetalloporphyrins

Study on Ag-Mo Catalyst for Direct Vapor-Phase Epoxidation of Propylene by Molecular Oxygen

Epoxidation of Propylene by Molecular Oxygen over Modified Ag–MoO 3 Catalyst

Epoxidation of Propylene by Molecular Oxygen over the Ag–Y2O3–K2O/α-Al2O3 Catalyst

Modification of Ag-MoO3/ZrO2Catalyst with Metallic Chloride for Propylene Epoxidation by Molecular Oxygen

Direct epoxidation of propylene by molecular oxygen over Y2O3 and K2O-promoted Ag/α-Al2O3 catalyst

Gas Phase Epoxidation Of Propylene Over Amodified Ag/Alpha-Al2o3 Catalyst

Direct Epoxidation of Propylene on Nacl-Modified Cu/Sio2 Catalysts Using Air As Oxidant

Direct Epoxidation of Propylene with Molecular Oxygen over Ag–MoO3/ZrO2 Catalyst

Epoxidation of Propylene by Molecular Oxygen over Unsupported AgCu X Bimetallic Catalyst

Epoxidation of Propylene on NaCl-modified Silver Catalysts with Air As the Oxidant

Epoxidation of Propylene on NaCl-Modified VCe1-x Cux Oxide Catalysts with Direct Molecular Oxygen As the Oxidant

Preparation of Ag-MoO3/Molecular Sieves Catalysis for Vapor-phase Epoxidation of Propylene to Propylene Oxide

Direct Propylene Epoxidation over Modified Ag/CaCO3 Catalysts

Gas-Phase Epoxidation of Propylene by Molecular Oxygen over Ag-Cucl2/Baco3 Catalyst with Low Cucl2 Doping: Catalytic Performance, Deactivation and Regeneration

Promotional Effect of Y2O3 on the Performance of Ag/α-Al2O3 Catalyst for Epoxidation of Propylene with Molecular Oxygen

In Situ FT-IR Study on the Direct Gas Phase Epoxidation of Propylene over Ag-MoO3 Catalyst

Role of Chlorohydrocarbon in Increasing Selectivity of Propylene Oxide over Ag–Y2O3–K2O/α-Al2O3 Catalyst for Epoxidation of Propylene by Molecular Oxygen

Effects of Preparation Conditions and Reaction Conditions on the Epoxidation of Propylene with Molecular Oxygen over Ag/TS-1 in the Presence of Hydrogen