Abstract:Ag-Cu-Cl/BaCO3 catalysts with different Cl and Cu loadings, prepared by the reduction deposition impregnation method, were investigated for gas-phase epoxidation of propylene by molecular oxygen and characterized by X-ray diffraction, X-ray photoelectron spectroscopy and O2 temperature programmed desorption. Ag-Cu-Cl/BaCO3 catalyst with 0.036 wt% Cu and 0.060 wt% Cl exhibited the highest catalytic performance for gas-phase epoxidation of propylene by molecular oxygen. A propylene oxide selectivity of 83.7% and propylene conversion of 1.2% were achieved under the reaction conditions of 20% C3H6-10% O2-70% N2, 200 °C, 0.1 MPa and 3000 h−1. Increasing the Cl loading allowed Ag to ensemble easier, whereas changing the Cu loading showed little effect on Ag crystallite size. The appropriate Cl loading of Ag-Cu-Cl/BaCO3 catalyst can reduce the dissociation adsorption of oxygen to atomic oxygen species leading to the combustion of propylene to CO2, which benefits epoxidation of propylene by molecular oxygen. Excessive Cl loading of Ag-Cu-Cl/BaCO3 catalyst decreases propylene conversion and propylene oxide selectivity remarkably because of Cl poisoning. The appropriate Cu loading of Ag-Cu-Cl/BaCO3 catalyst is efficient for the epoxidation of propylene by molecular oxygen, and an excess Cu loading decreases propylene oxide selectivity because the aggregation of Cu species increases the exposed surfaces of Ag nanoparticles, which was shown by slight increases in atomic oxygen species adsorbed. The appropriate loadings of Cu and Cl of Ag-Cu-Cl/BaCO3 catalyst are important to strike the balance between molecular oxygen and atomic oxygen species to create a favorable epoxidation of propylene by molecular oxygen.

Gas Phase Selective Propylene Epoxidation over La2O3-Supported Cubic Silver Nanoparticles

Gas phase selective propylene epoxidation over La<sub>2</sub>O<sub>3</sub>-supported cubic silver nanoparticles

Increased Silver Activity For Direct Propylene Epoxidation Via Subnanometer Size Effects

Direct Epoxidation of Propylene with Molecular Oxygen over Ag–MoO3/ZrO2 Catalyst

Epoxidation of Propylene by Molecular Oxygen over Unsupported AgCu X Bimetallic Catalyst

Supported AgCuCl Nanoclusters as Bimetal Catalysts for Propylene Epoxidation with Molecular Oxygen

Fine cubic Cu<sub>2</sub>O nanocrystals as highly selective catalyst for propylene epoxidation with molecular oxygen

Study on Ag-Mo Catalyst for Direct Vapor-Phase Epoxidation of Propylene by Molecular Oxygen

Epoxidation of Propylene by Molecular Oxygen over Modified Ag–MoO 3 Catalyst

Direct epoxidation of propylene by molecular oxygen over Y2O3 and K2O-promoted Ag/α-Al2O3 catalyst

Direct Gas-Phase Epoxidation of Propylene to Propylene Oxide Using Air As Oxidant on Supported Gold Catalyst

Epoxidation of Propylene on NaCl-modified Silver Catalysts with Air As the Oxidant

Gas Phase Epoxidation Of Propylene Over Amodified Ag/Alpha-Al2o3 Catalyst

Epoxidation of Propylene by Molecular Oxygen over the Ag–Y2O3–K2O/α-Al2O3 Catalyst

Epoxidation of Propylene by Molecular Oxygen over Supported Ag–Cu Bimetallic Catalysts with Low Ag Loading

Gas Phase Propylene Epoxidation over Au Supported on Titanosilicates with Different Ti Chemical Environments

Gas-Phase Epoxidation of Propylene by Molecular Oxygen over Ag-Cucl2/Baco3 Catalyst with Low Cucl2 Doping: Catalytic Performance, Deactivation and Regeneration

In Situ FT-IR Study on the Direct Gas Phase Epoxidation of Propylene over Ag-MoO3 Catalyst

Propene Epoxidation with Molecular Oxygen: Advancements from Nanoparticle to Single‐atom Catalysts

Effect of Ag addition on performance of Au/TS-1-B catalyst in gas phase propylene epoxidation

Gas-phase Epoxidation of Propylene by Molecular Oxygen over Ag-Cu-Cl/BaCO3 Catalyst: Effects of Cu and Cl Loadings