Abstract:High-G accelerometers have a variety of applications with severe shock loadings especially in crash and impact environments. The package for a high-G accelerometer should provide both protection against such harsh environments and necessary communications with outside the package. The residual stress caused by packaging process which degrades the sensor performance should be considered at the beginning of packaging design. The accelerometer in this study is based on a piezoresistive structure fabricated by a standard MEMS fabrication process A glass cap was anodically bonded to the structure to protect the movable parts. Then a packaging substrate was fixed to above structures with an adhesive material. FEM simulation based on a simplified structure of the accelerometer has been applied in static analyses in order to find out the potential stress brought by the package. The affection of different adhesive and packaging materials on the acceletometer performance was simulated. The results of simulations show that both the Young's modulus of the adhesive and the coefficient of thermal expansion (CTE) of packaging substrate could have a significant impact on the initial output of the accelerometer. An experiment study on the affection was also conducted, and the results were similar to the results of FEM(finite element method) simulations for the simplified structure. Thus the FEM simulation of such simplified structure could serve as the basic of accelerometer packaging design. Based on former results, optimized process was suggested in the package of the accelerometer and the packaged accelerometer was tested with satisfactory results.

Liquid Packaging Effects on Piezoresistive MEMS Accelerometer

Thermal stress of MOEMS Accelerometers Based on Grating Interferometric cavity

Finite Element Simulation on Packaging of Hinged High-G Micromachined Accelerometer

Study on the packaging technology for a high-G MEMS accelerometer

Design, fabrication and experiment of a MEMS piezoresistive high-g accelerometer

Investigation and experiment of high shock packaging technology for High-G MEMS accelerometer

An aerosol deposition based MEMS piezoelectric accelerometer for low noise measurement

A high sensitivity piezoelectric MEMS accelerometer based on aerosol deposition method

IMPACT EXPERIMENT ANALYSIS OF MEMS ULTRA-HIGH G PIEZORESISTIVE SHOCK ACCELEROMETER

Modeling and Simulation of A Silicon Integration Tri-Axial Piezoresistive MEMS Accelerometer Chip Used for High Impact Test

A Double-End Fixed Beam Structure of MEMS Piezoresistive High G Accelerometer

Accurate Assessment of Packaging Stress Effects on MEMS Sensors by Measurement and Sensor–Package Interaction Simulations

A Novel Resonant MEMS Accelerometer Operating in Air with Thermally Actuated Piezoresistive Resonators

MEMS fluid density sensor based on oscillating piezoresistive microcantilever

Simulation And Analysis Of Cantilever-Membrane Structure For Piezoresistive Micro-Accelerometers

Design, Fabrication, and Dynamic Environmental Test of a Piezoresistive Pressure Sensor

Design of a Beam-Membrane Piezoresistive Accelerometer Based on MEMS Technology

Design, Manufacture And Test Of Novel Mems Piezoresistive Accelerometer For High G Application

A Two-Axis MEMS Piezoresistive In-Plane Accelerometer with Pure Axially Deformed Microbeams

Study and characterization of plastic encapsulated package for a three-axis piezoresistive acceleromete with guard-ring structure

Capillary effect-based selective sealing strategy for increasing piezoelectric MEMS speaker performance