Abstract:With the progress in metallurgical technique and steel production process, the strength of structural steels can be improved, along with other material properties, including higher toughness and better weldability. Meanwhile, there are numerous potential civil structural applications for high strength steel (HSS), such as large-span space frames, transfer truss in high-rise buildings, as well as truss bridges. The mechanical behavior of structural members made up from HSS must be closely investigated and quantified before HSS can be widely used in engineering structures. In this paper experiments on six Q550 HSS I-section beams under moment gradient (MG) and four Q550 HSS I-section beams under patch loading (PL) were carried out, to investigate the local buckling behavior of I-section beams subjected to different loading conditions. The failure modes, critical local buckling strengths, ultimate strengths, load–deformation curves, load–strain curves and moment–rotation curves of the specimens were obtained. The test results of ultimate strengths were further compared with the design results in accordance with the available design methods in current specifications, ANSI/AISC 360-16, Eurocode 3, AS 4100-1998, AIJ LSD 2010 and GB 50017-2003. Accounting for material nonlinearity, geometric imperfection and residual stress, finite element models were established and verified with the existing test results, which were used for the parametric analysis of two series of 240 beams. The parametric investigation focused on the effects of the material properties and component plate slenderness on the ultimate strengths of I-section beams under MG and the ones under PL. The comparisons between the parametric analysis results, test results and the design results from ANSI/AISC 360-16 and Eurocode 3 were also conducted.

Experimental Study On The Mechanical Behavior Of T-Stubs With Q690 High Strength Steel And 12.9 High Strength Bolts

Experimental investigation of mechanical behavior of grade 8.8 and 10.9 small-sized (m14-m20) bolts with the thread into the bolt hole

Test on shear behavior of less-tightened high-strength bolted connections

Mechanical Behavior of Loose High-Strength Bolted Connections with Thin Sheet Steels

Performance of Q690 high-strength steel T-stub under monotonic and cyclic loading

INVESTIGATIONS ON THE BEHAVIOR OF HIGH STRENGTH STEEL CONNECTIONS WITH GRADE 12.9 BOLTS

Investigation of the Tensile Properties of High-Strength Bolted Joints in Static Drill Rooted Nodular Piles

Ultimate Tensile Behavior of Bolted T-stub Connections with Preload

Effect of Stiffeners on Mechanical Behavior of T-Stubs Based on Experiment and Numerical Simulations

Experimental Research On Tensile Properties Of Q460 High Strength Steel Butt Welds

EXPERIMENTAL STUDY ON HIGH STRENGTH STEEL-PLATEBOLTED CONNECTIONS UNDER SHEAR FORCE

Experimental and numerical study on strength of high-strength steel double-V butt-welded joint

Experimental study and FEM analysis on mechanical behavior of a steel tubular joint with bolted connection subject to biaxial compression

Experimental Study on Mechanical Properties and Tightening Method of Stainless Steel High-Strength Bolts

Experimental Investigation Of Aluminum Alloy Extruded T-Stub Joints Connected By Swage-Locking Pins

Ultimate tensile behavior of bolted stiffened T-stub connections in progressive collapse resistance

Investigations and proposed design rules on bolted connections for high strength steel

Fracture behavior of Grade 10.9 high-strength bolts and T-stub connections in fire

Tensile behavior of cruciform stubs with staggered bolt patterns

Plasticity and ductile fracture of high-strength bolt materials under monotonic tension

Experimental and Analytical Study on Local Buckling Behavior of High Strength Steel Welded I-Section Beams