Abstract:The bidirectional output fiber laser can achieve two laser outputs from a single resonant cavity, which can reduce the volume and cost of high-power fiber laser systems and has good application prospects in the industry. In this work, we demonstrated a bidirectional output fiber laser oscillator structure, and a total output power of 8 kW at the 2 ports × 4 kW level was achieved experimentally for the first time. In order to suppress stimulated Raman scattering (SRS) and transverse mode instability (TMI), the double cladding ytterbium-doped fiber with a core/cladding diameter of 30/400 μm, a pair of matched output coupler fiber Bragg gratings (OCFBG) with a 3 dB bandwidth of 2 nm, and the pump source with wavelength-stabilized 981 nm laser diodes (LDs) were employed. The effect of the coiling method and diameter of the active fiber on the optical-to-optical (O-O) efficiency and TMI threshold were studied intensively. The comparison of laser performance with a unidirectional output oscillator was further exploited, and results indicated that the bidirectional output fiber laser oscillator possessed a higher O-O efficiency and TMI threshold. By optimizing the fiber coiling diameter and coiling method, we finally achieved a total laser output power of 8169 W (3769 W at end A and 4400 W at end B), with an efficiency of 74.6% and beam quality of M 2 A ∼ 2.13, M 2 B ∼ 2.36, while the total output power achieved by unidirectional output structure was only 5805 W with signs of TMI. To the best of our knowledge, it is the highest output power of the bidirectional output fiber laser.

Demonstration of the Reliability of a 5-Kw-level Oscillating-Amplifying Integrated Fiber Laser

Optimization and demonstration of 6 kW oscillating-amplifying integrated fiber laser employing spindle-shaped fiber to suppress SRS and TMI

A 3.5-kW near-single-mode oscillating–amplifying integrated fiber laser

A 4.8-kW high-efficiency 1050-nm monolithic fiber laser amplifier employing a pump-sharing structure

Demonstration of 3kW × 2 ports bidirectional output oscillating-amplifying integrated fiber laser employing chirped and tilted fiber Bragg gratings for co-SRS suppression

Demonstration of high-stable self-mode-locking pulses based on self-focusing in fiber lasers

1010 nm Directly LD-Pumped 6kW Monolithic Fiber Laser Employing Long-Tapered Yb3+-Doped Fiber

Optimization and demonstration of a bidirectional output linear-cavity fiber laser with a record high power of 2 × 4 kW

A 3.7-kW Oscillating-Amplifying Integrated Fiber Laser Featuring a Compact Oval-Shaped Cylinder Package

All-fiberized and narrow-linewidth 5 kW power-level fiber amplifier based on a bidirectional pumping configuration

915 nm pumping kilowatt fiber oscillator with high optical-to-optical efficiency

3.1 kW monolithic MOPA configuration fibre laser bidirectionally pumped by non-wavelength-stabilized laser diodes

Investigations of the High-Power, Single-Frequency, Sub-Microseconds, 1548-nm Fiber Laser Based on the Optical Pulse Modulation

Demonstration of 2.5 J, 10 Hz, nanosecond laser beam combination system based on non-collinear Brillouin amplification.

4.115kW near diffraction-limited high quality fiber laser based on 25/400μm fiber

10.6 Kw High-Brightness Cascade-End-pumped Monolithic Fiber Lasers Directly Pumped by Laser Diodes in Step-Index Large Mode Area Double Cladding Fiber

2.02 kW and 4.7 GHz linewidth near-diffraction-limited all-fiber MOPA laser

High Stability 500 Hz MOPA System for Planar Laser-Induced Fluorescence

2.19 kW narrow linewidth FBG-based MOPA configuration fiber laser.

End-Pumped 300 W Continuous-Wave Ytterbium-Doped All-Fiber Laser With Master Oscillator Multi-Stage Power Amplifiers Configuration

Demonstration of 25 J, 10 Hz, Nanosecond Laser Beam Combination System Based on Non-Collinear Brillouin Amplification