Abstract:The demand for high-performance chip-scale lasers has driven rapid growth in integrated photonics. The creation of such low-noise laser sources is critical for emerging on-chip applications, ranging from coherent optical communications, photonic microwave oscillators remote sensing and optical rotational sensors. While Brillouin lasers are a promising solution to these challenges, new strategies are needed to create robust, compact, low power and low cost Brillouin laser technologies through wafer-scale integration. To date, chip-scale Brillouin lasers have remained elusive due to the difficulties in realization of these lasers on a commercial integration platform. In this paper, we demonstrate, for the first time, monolithically integrated Brillouin lasers using a wafer-scale process based on an ultra-low loss Si3N4/SiO2 waveguide platform. Cascading of stimulated Brillouin lasing to 10 Stokes orders was observed in an integrated bus-coupled resonator with a loaded Q factor exceeding 28 million. We experimentally quantify the laser performance, including threshold, slope efficiency and cascading dynamics, and compare the results with theory. The large mode volume integrated resonator and gain medium supports a TE-only resonance and unique 2.72 GHz free spectral range, essential for high performance integrated Brillouin lasing. The laser is based on a non-acoustic guiding design that supplies a broad Brillouin gain bandwidth. Characteristics for high performance lasing are demonstrated due to large intra-cavity optical power and low lasing threshold power. Consistent laser performance is reported for multiple chips across multiple wafers. This design lends itself to wafer-scale integration of practical high-yield, highly coherent Brillouin lasers on a chip.

Demonstration of 2.5 J, 10 Hz, nanosecond laser beam combination system based on non-collinear Brillouin amplification.

Demonstration of 25 J, 10 Hz, Nanosecond Laser Beam Combination System Based on Non-Collinear Brillouin Amplification

Coherent Combining of Two Pulsed Solid State Lasers

Investigation on A Four-Beam Serial Laser Combination for A Non-Collinear Scheme Based on Brillouin Amplification

Joule-level 10 Hz Non-Collinear Multi-Pump SBS Amplifier with High Energy Extraction Efficiency Used for Laser Beams Combination

Nanosecond-pulse High-Peak-power Circle-Focusing Laser Beam for Laser Processing

Generation and Amplification of a Multi-Beam Sub-Nanosecond Laser

589 nm laser generation by frequency doubling of a single-frequency Raman fiber amplifier in PPSLT.

Demonstration of Multi-Pass Amplification of 46.9 Nm Laser Pumped by Capillary Discharge

Small-Scale Self-Focusing of 200 Ps Laser Pulses in Brillouin Amplification

Demonstration of an Ultraviolet Stimulated Brillouin Scattering Pulse Compressed Hundred Picosecond Laser in LiB3O5 Crystals

Characteristics of High-Energy Non-Collinear Brillouin Amplifier Based on Fused Silica

Amplification of 200-Ps High-Intensity Laser Pulses Via Frequency Matching Stimulated Brillouin Scattering

Demonstration of Gain Saturation and Double-Pass Amplification of a 698 Nm Laser Pumped by Capillary Discharge

Demonstration of stable, long-term operation of a nanosecond pulsed DPSSL at 10 J, 100 Hz

Enhanced Stimulated Brillouin Scattering Utilizing Raman Conversion in Diamond

Investigations of the High-Power, Single-Frequency, Sub-Microseconds, 1548-nm Fiber Laser Based on the Optical Pulse Modulation

Active frequency matching in stimulated Brillouin amplification for production of a 2.4 J, 200 ps laser pulse

Integrated Waveguide Brillouin Laser

Optimization and demonstration of a bidirectional output linear-cavity fiber laser with a record high power of 2 × 4 kW

Demonstration Of High-Gain In A Recombination Xuv Laser At 18.2 Nm Driven By A 20-J, 2-Ps Glass-Laser