Abstract:Semiconductor nanolaser has important research value and wide applications in many fields. However, it is still a challenge to obtain a nanolaser with tunability and high intensity at the nanoscale. Here, we report on lasers with two modes of emission wavelengths operating in near-infrared of nanohole filled with CoxGa0.6–xZnSe0.4 nanoparticle arrays at room temperature. The nanohole arrays are drawn on the photoresist by using the method of three-beam laser interferometric etching. Graphene with graphite which is coated on nanohole arrays is conducted by pulsed laser deposition (PLD) to construct the cavity. The CoxGa0.6–xZnSe0.4 nanoparticles are filled into the nanohole acting laser gain medium via the magnetic traction nanofilling technology. The results show that the laser at 868 and 903 nm is radiated, which can be tuned by changing the concentration and position of the filled nanoparticles in terms of wavelength and intensity. The nanolasers based on this approach represent an advantageous alternative to other design and fabrication methods. This nanoparticle nanolasers can be used in a micronano light source of an intelligent photonic chip.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.1c00035?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.1c00035</a>.Roadmap for pulsed laser ablation, description of video of nanoparticle preparation, photograph of nanoparticle suspension, preparation of target, description of video of three-beam optical path and spot, pulsed laser deposition system, magnetic field intensity stabilization, XRD and XPS results, Raman and microstructure information, refraction results, and microcavity length (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c00035/suppl_file/am1c00035_si_001.pdf">PDF</a>)Video of nanoparticle preparation, as described in section S2 of the Supporting Information pdf (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c00035/suppl_file/am1c00035_si_002.mp4">MP4</a>)Video of three-beam optical path and spot, as described in section S5 of the Supporting Information pdf (<a class="ext-link" href="/doi/suppl/10.1021/acsami.1c00035/suppl_file/am1c00035_si_003.mp4">MP4</a>)This article has not yet been cited by other publications.

Experimental demonstration of a nanobeam Fano laser

Demonstration of a Widely-Tunable and Fully-Coherent High-Gain Harmonic-Generation Free-Electron Laser

Electro-optic tuning of a single-frequency ultranarrow linewidth microdisk laser

Hybrid Integrated Narrow-Linewidth Semiconductor Lasers

Demonstration of 2.5 J, 10 Hz, nanosecond laser beam combination system based on non-collinear Brillouin amplification.

Demonstration of 25 J, 10 Hz, Nanosecond Laser Beam Combination System Based on Non-Collinear Brillouin Amplification

Lateral Emission Highly Polarized Single-Mode Nanobelt Laser (conference Presentation)

Experimental Demonstration of a 16-Channel DFB Laser Array Based on Nanoimprint Technology

Vertical Emitting Nanowire Vector Beam Lasers

Nanolasers Incorporating Co x Ga 0.6– x ZnSe 0.4 Nanoparticle Arrays with Wavelength Tunability at Room Temperature

Single-electron Nano-chip Free-electron Laser

Single-mode emission by phase-delayed coupling between nano-lasers

A Linearly Frequency Modulated Narrow Linewidth Single-Frequency Fiber Laser

Demonstration of a self-pulsing photonic crystal Fano laser

Ultranarrow linewidth photonic-atomic laser

3.3 Kw Narrow Linewidth FBG-based MOPA Configuration Fiber Laser with Near-Diffraction-limited Beam Quality

Investigations of the High-Power, Single-Frequency, Sub-Microseconds, 1548-nm Fiber Laser Based on the Optical Pulse Modulation

Demonstration of stable, long-term operation of a nanosecond pulsed DPSSL at 10 J, 100 Hz

Narrow-Strip 670 Nm Gain-Coupled Distributed Feedback Laser Based on Periodic Anodes Fabricated by I-Line Lithography

Photonic Nanolaser with Extreme Optical Field Confinement

Experimental Investigation of Single Voxels for Laser Nanofabrication Via Two-Photon Photopolymerization