Abstract:Fiber laser performances including transverse mode instability (TMI), stimulated Raman scattering (SRS) and optical-to-optical efficiency are in connection with the pump wavelength. Here we studied the output characteristics of a 5-kW ytterbium-doped fiber laser oscillator pumped with two different pump sources, i.e., 915 nm and 981 nm laser diodes (LDs). The output characteristics of fiber laser oscillators pumped by 915 nm and 981 nm have been compared strictly and directly with the same structure in a high-power situation. Experimental results show that both pump wavelengths can scale the power up to more than 5 kW by suppressing the TMI effect. While in the case of pumping by the 981 nm LDs, the laser oscillator has an optical-to-optical efficiency of 87%, which is 13% higher than that of the 915 nm pumped scheme. In addition, due to the higher backward pumping ratio and lower total pump power, the laser oscillator has a better SRS suppression ratio when pumped at 981 nm. Thus, it reveals a great potential to balance the limitations of TMI and SRS for scaling up to an even higher output while pumping at 981 nm. All the devices of the oscillator are commercial, and it will be helpful for the commercialization of high-power fiber laser oscillators.

915 nm pumping kilowatt fiber oscillator with high optical-to-optical efficiency

15 Kw, Near-Diffraction-limited, High-Efficiency, Single-End-pumped All-Fiber-integrated Laser Oscillator

1.5 kW, near-diffraction-limited, high-efficiency, single-end-pumped all-fiber-integrated laser oscillator.

First Demonstration and Comparison of 5 kW Monolithic Fiber Laser Oscillator Pumped by 915 nm and 981 nm LDs

Kilowatt-Level Monolithic All-Fiber Laser Oscillator

1010 nm Directly LD-Pumped 6kW Monolithic Fiber Laser Employing Long-Tapered Yb3+-Doped Fiber

A 1.8 kW high power all-fiber Raman oscillator

High Efficiency 165 W Near-Diffraction-limited Nd:YVO_4 Slab Oscillator Pumped at 880 Nm

High-Efficiency High-Power All-Fiber Oscillator with Counter-Pumping Configuration

5-Kw Monolithic Fibre Laser Oscillator with Ring Beam Output Employing Bidirectional-Pumping Scheme

High-efficiency All-Fibre Optical Parametric Oscillator Based on Photonic Crystal Fibres Pumped by Ytterbium-Doped Fibre Laser

Fiber oscillator of 5 kW using fiber Bragg gratings inscribed by a visible femtosecond laser

322 W Single-Mode Yb-doped All-Fiber Laser Operated at 1120 Nm

High Conversion Efficiency, Mid-Infrared Pulses Generated Via Burst-Mode Fiber Laser Pumped Optical Parametric Oscillator

High-efficiency All-Fiber Raman Fiber Amplifier with Record Output Power

The Crucial Fiber Components and Gain Fiber for High Power Ytterbium-Doped Fiber Laser

High Power Efficient 3.81 $\mu{\rm M}$ Emission from a Fiber Laser Pumped Aperiodically Poled Cascaded Lithium Niobate

1.1-Kw Ytterbium Monolithic Fiber Laser with Assembled End-Pump Scheme to Couple High Brightness Single Emitters

90.4-W All-Fiber Single-Frequency Polarization-Maintained 1 083-Nm MOPA Laser Employing Ring-Cavity Single-Frequency Seed Oscillator

700 W single-frequency all-fiber amplifier at 1064 nm with kHz-level spectral linewidth

3 kW Near-Single-Mode All-Fiber Amplifier Based on 20/400μm Gain Fiber and Its Long Time Operation Characteristics