Abstract:In this paper, we report a high power single frequency 1030 nm fiber laser with near-diffraction-limited beam quality based on a polarization-maintaining tapered Yb-doped fiber (T-YDF). The T-YDF has advantages of effectively suppressing stimulated Brillouin scattering (SBS) while maintaining good beam quality. As a result, a record output power of 379 W single frequency, linearly polarized, nearly single-mode fiber amplifier operating at 1030 nm is demonstrated. The polarization extinction ratio is as high as 16.3 dB, and the M-2 is measured to be 1.12. Further, the dependence of the thermal-induced mode instability (TMI) threshold on the polarization state of an input signal laser is investigated for the first time. By changing the polarization state of the injected seed laser, the output power can increase to 550 W while the beam quality can be maintained well (M-2 = 1.47). The slope efficiency of the whole amplifier is about 80%. No sign of SBS appears even at the highest output power and the further brightness scaling of both situations is limited by the TMI effect. To the best of our knowledge, this result is the highest output power of all-fiberized single frequency fiber amplifiers. (C) 2020 Optical Society of America under the terms of the OSA Open Access Publishing Agreement

A 1150-W 1018-Nm Fiber Laser Bidirectional Pumped by Wavelength-Stabilized Laser Diodes

High-power 1018 nm ytterbium-doped fiber laser with output of 805 W.

307 W High-Power 1018 Nm Monolithic Tandem Pump Fiber Source with Effective Thermal Management

High-power 1018 nm ytterbium-doped fiber laser and its application in tandem pump.

1010 nm Directly LD-Pumped 6kW Monolithic Fiber Laser Employing Long-Tapered Yb3+-Doped Fiber

A High-Power All-Fiberized Yb-doped Laser Directly Pumped by a Laser Diode Emitting at Long Wavelength

A 2.14 Kw Tandem Pumped Fiber Amplifier

High Power 1018 Nm Ytterbium Doped Fiber Laser with an Output Power of 309 W

1150-Nm Yb-Doped Fiber Laser Pumped Directly by Laser-Diode with an Output Power of 52 W

High-temperature-insensitivity high-power Yb-doped fiber laser directly in-band pumping by 1018 nm laser diodes

Hybrid-structure 1018-Nm Monolithic Single-Mode Fiber Laser Producing High Power and High Efficiency

A 4.8-kW high-efficiency 1050-nm monolithic fiber laser amplifier employing a pump-sharing structure

Diode-Pumped 1178-Nm High-Power Yb-Doped Fiber Laser Operating at 125 $^{\circ}$ C

20 Kw Monolithic Fiber Amplifier with Directly Dual-Wavelength Laser Diodes Counter Pumping

Efficient Special S-band Ytterbium Fiber Laser Emitting at 1012 Nm and Its Application in Tandem Pumping

First Experimental Investigation of the Amplification of a Yb-doped Fiber Laser Pumped with 1000 and 1014-Nm Laser Diodes

1.1-Kw Ytterbium Monolithic Fiber Laser with Assembled End-Pump Scheme to Couple High Brightness Single Emitters

550 W single frequency fiber amplifiers emitting at 1030 nm based on a tapered Yb-doped fiber

Laser Diode-Pumped Dual-Cavity High-Power Fiber Laser Emitting at 1150 Nm Employing Hybrid Gain.

Research of High Brightness 1018 Nm Ytterbium Doped Fiber Laser

High power self-organized coherent beam combination of 1018 nm Yb-doped fiber lasers