Abstract:Impedance matching plays a vital role in a microwave atmospheric pressure plasma jet (MW-APPJ). However, real-time tuning of MW-APPJ impedance matching has rarely been investigated. In this study, we have found that the dissipated microwave power and length of a MW-APPJ are effected by the application of a DC-bias magnetic field. By placing a MW-APPJ in a gap between two electromagnets, the consumed microwave power varied with the insertion position of the MW-APPJ. When the MW-APPJ was fixed at the center of the electromagnets, the consumed microwave power decreased as the DC magnetic field intensities increased, from 12 to 750 mT. The variation of consumed microwave power was much higher at lower gas velocities, which indicates that the DC magnetic field has a relatively strong effect on microwave plasma with lower gas velocity. The length of the plasma jet also decreased with increasing DC magnetic field, which was mainly due to the variation of the consumed microwave power. To explain these interesting phenomena, the effective permittivity of microwave plasma and the equivalent circuit model of a generator under DC-bias magnetic field have been analyzed. The effective permittivity of the plasma is related to its cyclotron frequency, which is a function of the DC-bias magnetic field. The variation of the effective permittivity changes the load impedance of the plasma generator. Therefore, the reflection coefficient of the plasma generator is adjusted and the length of the plasma jet varies with the change in consumed microwave power.

An Economic Real-Time Microwave Plasma Impedance Measurement Method

A novel on-line microwave diagnostic for an atmospheric pressure air plasma based on an artificial neural network

Dynamic Measurement of Relative Complex Permittivity of Microwave Plasma at Atmospheric Pressure

High-speed plasma measurements with a plasma impedance probe

Electron density measurement of an ionospheric-like plasma using an impedance probe

Determining Electron Density of Atmospheric Microwave Air Plasma Torch by Microwave Power Measurement

Probe method to measure the electromagnetic field in a plasma by Poynting vector conversion

Microwave Technology Used for Plasma Diagnostic in Complicated Situations

Effect of Transverse DC Magnetic Field on the Impedance Matching and Morphology of a Microwave Atmospheric Pressure Plasma Jet

Impedance Characteristic Analysis and Preliminary Experimental Results of a High-Power RF Plasma Source

Microwave Plasma Thruster Plume Diagnosis Using Microwave Interference Method

Experimental Study on the Characteristics of Low Power Microwave Plasma Jet Within Local Vacuum Environment

Diagnostic Study on the Electron Density Distribution of Microwave Plasma Jet in Vacuum Environment

Plasma power balance: methodology and investigations of microwave capillary discharges

A Novel Dynamic Measurement Method for Complex Permittivity of Microwave Plasma

Langmuir Probe Diagnostics with Optical Emission Spectrometry (OES) for Coaxial Line Microwave Plasma

Microwave Diagnostics of Cold Atmospheric Pressure Plasma Jets Based on the Radiation Pattern Measurements

Measurement of Microwave Propagation in Weakly Ionized Dusty Plasma

Measurement of Transient Electron Density of a Pulsed Microwave Argon Plasma Jet Via Microwave Rayleigh Scattering

The Possibility of Measuring Electron Density of Plasma at Atmospheric Pressure by a Microwave Cavity Resonance Spectroscopy

Broadband Microwave Characteristics of a Novel Coaxial Gridded Hollow Cathode Argon Plasma