Abstract:Optical sources emitting in the ultraviolet (UV) to near-infrared wavelength range are an enabling tools for a wide variety of applications. To achieve broadband coherent generation within visible and UV spectrum, one fundamental obstacle is the strong material dispersion which limits efficient frequency conversion. Previous works have addressed this challenge by either using high input energies or delicate resonant structures. In this work, a simple device system is proposed to tackle the problem. Single crystalline aluminum nitride material with a threading dislocation density less than 109 cm–2 was used to provide broadband transparency, and a high order waveguide mode (transverse electric, TE10) was used to create anomalous dispersion near 800 nm, in which soliton fission processes are supported. As a result, supercontinuum generation from 490 nm to over 1100 nm with a second harmonic generated band covering from 407 to 425 nm is achieved with the total on-chip pulse energy of 0.6 nJ.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsphotonics.0c01785?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsphotonics.0c01785</a>.Atomic force microscopy, ellipsometry, schematic of process flow, SEM images, propagation loss, estimation of propagation loss, laser-induced material damage, dyadic Green's function for loss estimation, and supplementary experimental data (<a class="ext-link" href="/doi/suppl/10.1021/acsphotonics.0c01785/suppl_file/ph0c01785_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Efficient dispersion engineering for three-octave-spanning supercontinuum generation in nanophotonic waveguides

Efficient supercontinuum generation enabled by dispersion engineering in a dual-core waveguide

Numerical Study on Flat Dispersion in a Single-Layer Si3N4 Coupled-Waveguides with Four Zero-Dispersion Wavelengths for Supercontinuum Generation

Ultra-Broadband Dispersion Engineering Of Nanophotonic Waveguides

Supercontinuum generation in dispersion engineered highly doped silica glass waveguides

Broadband Mid-Infrared Supercontinuum Generation in Dispersion-Engineered As2S3-silica Nanospike Waveguides Pumped by 2.8 Μm Femtosecond Laser

Three-Octave Supercontinuum Generation Using SiO2 Cladded Si3N4 Slot Waveguide with All-Normal Dispersion

Silicon waveguide with four zero-dispersion wavelengths and its application in on-chip octave-spanning supercontinuum generation.

On-chip Two-Octave Supercontinuum Generation by Enhancing Self-Steepening of Optical Pulses

Ultraflat Supercontinuum Generation in a Dispersion‐flattened Microstructure Fiber

Ultra-flattened Chromatic Dispersion Photonic Crystal Fiber with High Nonlinearity for Supercontinuum Generation

Ultra-Broadband Dispersion Engineering Of Nanophotonic Devices With Five Zero-Dispersion Wavelengths

Three-octave supercontinuum spanning with Z-cut lithium niobate photonic waveguide

Octave-spanning Supercontinuum Generation in Nanoscale Lithium Niobate Waveguides

Ultra-Broadened Supercontinuum Generation in a Novel Dispersion-Flattened and Decreasing Fibre

Supercontinuum generation assisted by dispersive waves trapping in dispersion-managed integrated silicon waveguides

Supercontinuum Generation in High Order Waveguide Mode with near-Visible Pumping Using Aluminum Nitride Waveguides

Flattened 2.5-Octave Supercontinuum in a Silicon Nitride Waveguide Pumped with Picosecond Pulses

Efficient Design for Integrated Photonic Waveguides with Agile Dispersion

Flat Supercontinuum Generation at 1550 Nm in a Dispersion-Flattened Microstructure Fibre Using Picosecond Pulse

Supercontinuum generation using 120 fs femtosecond pulse laser in a dispersion flattened photonic crystal fiber