Ultra-Broadband Dispersion Engineering Of Nanophotonic Devices With Five Zero-Dispersion Wavelengths

Hanxiao Liang,Yang He,Rui Luo,Qiang Lin

DOI: https://doi.org/10.1364/cleo_at.2016.jth2a.114

2016-01-01

Abstract:We report a novel and convenient approach for dispersion engineering over multi-octave spectral range that is able to achieve peculiar oscillatory dispersion curves with five zero-dispersion wavelengths which have never been shown before.

What problem does this paper attempt to address?

Ultra-Broadband Dispersion Engineering Of Nanophotonic Waveguides

Hanxiao Liang,Yang He,Rui Luo,Qiang Lin

DOI: https://doi.org/10.1364/OE.24.029444

IF: 3.8

2016-01-01

Optics Express

Abstract:We propose double-cladded and multi-cladded waveguide structures that enable flexible engineering of group-velocity dispersion over multi-octave spanning spectral range, allowing to produce intriguing dispersion characteristics that oscillate between normal and anomalous dispersion in a sinusoidal-like fashion with controllable magnitude, which will be very useful for nonlinear photonic applications. The proposed waveguides are easy to fabricate in practice, which we expect to have great potential for broad applications in nonlinear photonics, quantum optics, and optical communication. (C) 2016 Optical Society of America
Broadband Noise-Like Pulse Generation at 1 Μm Via Dispersion and Nonlinearity Management.

Ji Zhou,Yuhang Li,Yaoguang Ma,Qing Yang,Qiang Liu

DOI: https://doi.org/10.1364/ol.420002

2021-01-01

Abstract:We demonstrate that optical microfibers integrated in Yb-doped fiber lasers boost broadband noise-like pulse (NLP) generation via dispersion and nonlinearity management, with an optical spectrum spanning from below 1000 nm to beyond 1600 nm when the diameter of the optical microfiber is 1.2 µm. Numerical simulations show that dispersion and nonlinearity management provided by the optical microfiber is responsible for the broadband NLP generation. Furthermore, it is shown experimentally that dispersion and nonlinearity management via optical microfibers can also bring the highest optical rogue waves along with the broadest optical spectrum.
Subwavelength-diameter optical fibers: waveguiding properties and photonic applications

Li-Min TONG,Xin-Yun PAN

DOI: https://doi.org/10.3321/j.issn:0379-4148.2007.08.008

2007-01-01

Physics

Abstract:By means of high-temperature physical drawing, glasses can be directly drawn into subwavelength-or nanometer-diameter fibers. As-fabricated nanofibers show excellent diameter uniformity and surface smoothness for low-loss optical wave guiding, and may exhibit a series of interesting properties such as tight optical confinement, evanescent guidance and high waveguide dispersion. These fibers provide promising building blocks for photonic applications in optical communications, optical sensing and nonlinear optics.
Efficient dispersion engineering for three-octave-spanning supercontinuum generation in nanophotonic waveguides

Mulong Liu,Chengwei Gu,Xuening Fan,Zhiheng Li,Huimin Huang,Zhizhou Lu,Wei Zhao

DOI: https://doi.org/10.1016/j.optlastec.2022.107923

2022-06-01

Abstract:We propose a dispersion-flattened technology for producing broadband and low anomalous dispersion with minimal zero-dispersion wavelengths (ZDWs). This structure can be formed by nanophotonic waveguides using different material combinations. Flat dispersion varying between 0 and 27 ps/nm/km and spanning a range of wavelengths between 1290 and 4570 nm can be achieved. Without applying dispersion hybridization and using complex material combinations, dispersion demonstrates good tolerance to pump wavelength selection and is easier to introduce. Furthermore, the designed structures are applied to generate a supercontinuum over three octaves considering wavelength dependent loss from cladding, which exhibits an excellent bandwidth of − 40 dB even with increasing losses from the waveguide material or structure generation. These findings are useful for supercontinuum generation over multiple octaves in different platforms, which is promising for self-referenced f-2f systems and spectroscopy applications.

optics,physics, applied
Broadband Dispersion Engineering for Integrated Photonics Just by Tuning the Width of the Waveguide

Yu Li,Le An,Yuandong Huo,Minghua Chen,Hongwei Chen,Sigang Yang

DOI: https://doi.org/10.1364/cleo_at.2017.jw2a.116

2017-01-01

Abstract:We develop a dispersion engineering technique based on tailoring the width of waveguide. It achieves anomalous dispersion with a range of 70 nm numerically and alters the dispersion from - 820 +/- 30 ps/nm/km to - 140 +/- 40 ps/nm/km experimentally.
Spatial-Mode-Coupling-Based Dispersion Engineering For Integrated Optical Waveguide

Yu Li,Jiachen Li,Yuandong Huo,Minghua Chen,Sigang Yang,Hongwei Chen

DOI: https://doi.org/10.1364/OE.26.002807

IF: 3.8

2018-01-01

Optics Express

Abstract:Dispersion ultimately limits the efficiency of the nonlinear process in the optical waveguide. Traditional dispersion engineering method is to tailor the cross-section of the waveguide with both of the height and width. However, the fabrication process limits the design freedom of the height in some cases. To solve the problem, we develop a dispersion engineering technique based on spatial mode coupling. Just by tailoring the width of waveguide without altering the height, the proposed method achieves anomalous dispersion with a range of 70 nm numerically and experimentally changes the dispersion of a micro-ring resonator from -750 +/- 30 ps/nm/km to 1300 +/- 200 ps/nm/km over a wavelength range of 25 nm with high Q of 0.8 million on the Si3N4/SiO2 waveguide platform. This technique overcomes the restrict from the fabrication process to the optical waveguide on the dispersion control and can enlarge application of the nonlinear optics on chip. (c) 2018 Optical Society of America under the terms of the OSA Open Access Publishing Agreement
Efficient Design for Integrated Photonic Waveguides with Agile Dispersion

Zhaonian Wang,Jiangbing Du,Weihong Shen,Jiacheng Liu,Zuyuan He

DOI: https://doi.org/10.3390/s21196651

2021-10-07

Abstract:Chromatic dispersion engineering of photonic waveguide is of great importance for Photonic Integrated Circuit in broad applications, including on-chip CD compensation, supercontinuum generation, Kerr-comb generation, micro resonator and mode-locked laser. Linear propagation behavior and nonlinear effects of the light wave can be manipulated by engineering CD, in order to manipulate the temporal shape and frequency spectrum. Therefore, agile shapes of dispersion profiles, including typically wideband flat dispersion, are highly desired among various applications. In this study, we demonstrate a novel method for agile dispersion engineering of integrated photonic waveguide. Based on a horizontal double-slot structure, we obtained agile dispersion shapes, including broadband low dispersion, constant dispersion and slope-maintained linear dispersion. The proposed inverse design method is objectively-motivated and automation-supported. Dispersion in the range of 0-1.5 ps/(nm·km) for 861-nm bandwidth has been achieved, which shows superior performance for broadband low dispersion. Numerical simulation of the Kerr frequency comb was carried out utilizing the obtained dispersion shapes and a comb spectrum for 1068-nm bandwidth with a 20-dB power variation was generated. Significant potential for integrated photonic design automation can be expected.
Dual Concentric-Ring-Core Fiber With Four Zero-Dispersion Wavelengths for Beyond Three-Octave OAM Supercontinuum Generation

Wenpu Geng,Yuxi Fang,Yingning Wang,Zhi Wang,Yan-ge Liu,Lin Zhang,Changjing Bao,Yongxiong Ren,Zhongqi Pan,Yang Yue

DOI: https://doi.org/10.1109/jlt.2022.3202703

IF: 4.7

2023-04-01

Journal of Lightwave Technology

Abstract:Orbital angular momentum (OAM) beams, featuring with unique spatial field distributions, have been extensively investigated and applied into a wide range of fields. In most applications, OAM beams covering a certain frequency band are usually required, and supercontinuum (SC) generation is a feasible method to provide broadband OAM source. As a short pulse is incident into a specially designed optical fiber with flat dispersion over broad bandwidth, a broadband SC could be generated along propagation due to the nonlinear spectral broadening. In this work, we propose a dual concentric-ring-core fiber design to achieve near-zero and flat dispersion profile over 3007-nm wavelength range with four zero-dispersion wavelengths for the OAM mode. The precise position of the zero-dispersion wavelengths can be tailored by varying the structural variables and the germanium-doped concentration of the silica-based fiber. The performance of the spectral broadening in terms of flatness and bandwidth is investigated under different input pulse and propagation conditions. Simulation results depict that the OAM3,1 mode supercontinuum spectrum can achieve beyond three-octave spanning from 445 to 3942 nm at 40 dB level by pumping a 50-fs 600-kW Gaussian pulse at the central wavelength of 1900 nm into a 2-mm designed fiber. By further optimizing the proposed fiber structure for the OAM1,1 mode with <60 ps(nmkm) dispersion variation over a 3210-nm bandwidth, the generated supercontinuum can cover nearly three octaves.

engineering, electrical & electronic,optics,telecommunications
Boosting dispersive wave emission via spectral phase shaping in nonlinear optical fibers

Haozhe Li,Xiang Zhang,Jin Zhang,Davide Pierangeli,Lifu Zhang,Dianyuan Fan

DOI: https://doi.org/10.1016/j.rinp.2020.103518

IF: 4.565

2020-12-01

Results in Physics

Abstract:<p>Dispersive waves (DWs) radiation in optical fibers allow to excite frequencies in spectral regions that are otherwise difficult to access. However, the resonant emission is weak and phase matching inhibits its shaping, making it ineffective in many applications. Here, we numerically investigated that DWs generated from high-energy pulses propagating in nonlinear optical fibers can be controlled through spectral phase modulation. Using tunable asymmetric and oscillatory temporal pulse shapes obtained by cubic and quadratic spectral phase modulation, we excite a multiple emission process that strongly enhances the energy and peaks of DWs. Successive collisions between the shed soliton and multiple secondary peaks of the asymmetric pulse give the mechanism to stimulate various resonant frequencies. The whole process can be precisely controlled by simply adjusting the spectral phase modulation structure without the need to change the fiber length. This radiation is either reduced or enhanced by the Raman effect depending on whether the third-order dispersion is positive or negative. Our results provide a novel strategy to manipulate DWs emission and particularly to boost the DWs energy in optical fibers that may be relevant in the development of novel electromagnetic sources for broadband supercontinuum and on-chip frequency-comb generation.</p>

physics, multidisciplinary,materials science
Broadband Dispersive Free, Large, and Ultrafast Nonlinear Material Platforms for Photonics

Xinxiang Niu,Xiaoyong Hu,Cuicui Lu,Yan Sheng,Hong Yang,Qihuang Gong

DOI: https://doi.org/10.1515/nanoph-2020-0420

IF: 7.5

2020-01-01

Nanophotonics

Abstract:Broadband dispersion free, large and ultrafast nonlinear material platforms comprise the essential foundation for the study of nonlinear optics, integrated optics, intense field optical physics, and quantum optics. Despite substantial research efforts, such material platforms have not been established up to now because of intrinsic contradictions between large nonlinear optical coefficient, broad operating bandwidth, and ultrafast response time. In this work, a broadband dispersion free, large and ultrafast nonlinear material platform based on broadband epsilon-near-zero (ENZ) material is experimentally demonstrated, which is designed through a novel physical mechanism of combining structural dispersion and material dispersion. The broadband ENZ material is constructed of periodically nanostructured indium tin oxide (ITO) films, and the structure is designed with the help of theoretical predictions combined with algorithm optimization. Within the whole broad ENZ wavelength range (from 1300 to 1500 nm), a wavelength-independent and large average nonlinear refractive index of −4.85 × 10−11 cm2/W, which is enlarged by around 20 times than that of an unstructured ITO film at its single ENZ wavelength, and an ultrafast response speed at the scale of Tbit/s are experimentally reached simultaneously. This work not only provides a new approach for constructing nonlinear optical materials but also lays the material foundation for the application of nanophotonics.
Ultrabroadband Second-Harmonic Generation Based on a Dispersion-Engineered Lithium Niobate on Insulator Waveguide

Chi Zhang,Xiaohui Tian,Huaying Liu,Jiachen Duan,Kunpeng Jia,Zhenda Xie,Shining Zhu

DOI: https://doi.org/10.1364/josab.469916

2022-01-01

Journal of the Optical Society of America B

Abstract:Second-harmonic generation (SHG) is widely used for wavelength conversions in various applications including multi-wavelength lasers, imaging, and ultrafast optics. However, it remains a long-standing challenge to achieve both a broad SHG bandwidth and high efficiency due to the medium dispersion. Here, we propose an ultrabroadband efficient SHG on a lithium niobate on insulator (LNOI) platform by dispersion engineering. The waveguide cross section with two V-shaped grooves is carefully designed to minimize first- and second-order dispersion, which is feasible for current fabrication techniques. Due to the flattened dispersion, a record-high, to our knowledge, bandwidth-length product ( Δ λ ⋅ L ) of 2444 µ m 2 is achieved in a periodically poled 1.64-cm-long LNOI waveguide, which is four times the previously reported result. Such a scheme can also be generalized to SHG waveguides on other material platforms. Our results provide a new strategy of dispersion engineering for integrated photonics, and may be helpful for applications including frequency doubling, supercontinuum generation, and optical frequency combs.
Multiple coherent OAM dispersive waves generation in dual concentric ring-core fiber

Wenpu Geng,Yuxi Fang,Changjing Bao,Zhongqi Pan,Yang Yue

DOI: https://doi.org/10.1016/j.optlastec.2024.110929

IF: 4.939

2024-04-14

Optics & Laser Technology

Abstract:Light-carrying orbital angular momentum (OAM) has exhibited significant potential across a diverse array of fields. In several of these applications, broadband coherent OAM sources are essential for the functioning of optical systems. The emission of dispersive waves facilitates efficient energy transfer to distant spectral domains while preserving coherence between generated frequency components. In this work, we introduce a dual concentric-ring-core fiber design capable of generating two and four OAM dispersive waves (DWs) under conditions of anomalous dispersion and normal dispersion pumping, respectively. The physical phenomena underlying the spectral evolution are delved and each case is discussed separately. Our findings reveal that the locations and quantities of dispersive wave generation in both scenarios align with predictions derived from the corresponding phase matching conditions. This technique paves the way for the development of an efficient OAM supercontinuum source characterized by a high degree of coherence.

optics,physics, applied
Single-mode Dispersion-engineered Nonlinear Integrated Waveguides for Ultra-broadband Optical Amplification and Wavelength Conversion

Ping Zhao,Vijay Shekhawat,Marcello Girardi,Zonglong He,Victor Torres-Company,Peter A. Andrekson

2024-09-24

Abstract:Four-wave mixing has extensively been investigated for various applications such as communications, spectroscopy, metrology, quantum computing and bio-imaging. However, there is a clear desire to implement these functionalities in a small footprint nonlinear platform, being capable of efficient operation across a large optical bandwidth. Many such integrated platforms have been explored, but suffer from intrinsic significant performance degradation, because conventional approaches of nonlinear photonic waveguide geometry construction for dispersion engineering focus on waveguide cross section and result in always being multimode as a byproduct. Here we propose and demonstrate a methodology that utilizes not only the impact of the waveguide cross section on the modal and dispersion behavior of the waveguide but also includes the impact of the waveguide bend for cutting off high-order modes. This approach results in simultaneous single-mode operation and dispersion engineering for very broadband operation of four-wave mixing. While we implemented this in silicon nitride waveguides, which has emerged as a promising platform capable of continuous-wave optical parametric amplification, the design approach can be universally used with other platforms as well. By also considering both second- and fourth-order dispersion we achieve unprecedented amplification bandwidths of approximately 300 nm in super-low-loss silicon nitride nonlinear waveguides. In addition, penalty-free all-optical wavelength conversion of 100 Gbit/s data in a single optical carrier over 200 nm is realized, for the first time, without optical amplification of signal or idler waves. These single-mode hyper-dispersion-engineered nonlinear integrated waveguides can become practical building blocks in versatile nonlinear photonic devices and optical networks.

Optics
Design of Photonic Crystal Fibers with Anomalous Dispersion

Chi Hao,Zhang Xian-min,Shen Lin-fang

DOI: https://doi.org/10.1007/bf03033578

2006-01-01

Abstract:Photonic crystal fibers (PCFs) with anomalous dispersion in short wavelength region are significant for some applications, such as short wavelength soliton propagation, super continuum generation and short pulse fiber lasing. In this paper, a systematic method for designing PCFs with required anomalous dispersion region is proposed by using a finite difference solver and the scaling transformation of the waveguide dispersion of PCFs. Designed PCF can be anomalously dispersive in the region less than 1.3 μm, which is very difficult to realize in the traditional standard single-mode fibers. The effectiveness of the proposed method is approved by numerical results.
Ultra-broadband spatial light modulation with dual-resonance coupled epsilon-near-zero materials

Qin Chen,Shichao Song,Huacun Wang,Li Liang,Yajin Dong,Long Wen

DOI: https://doi.org/10.1007/s12274-020-3271-1

IF: 9.9

2020-12-23

Nano Research

Abstract:It has been found that the dielectric constants of transparent conductive oxides (TCOs) can be adjusted in an extremely large range by tuning the carrier density. Due to the remarkable light confinement property of the epsilon-near-zero (ENZ) effect of TCOs, it has attracted extensive interests of light modulation. However, the operation wavelength bandwidth is usually limited by optical resonance that is applied to enhance the light-TCOs interaction. In this work, a dual-resonance light coupling scheme is proposed to expand the modulation depth-bandwidth product with almost one order-of-magnitude improvement. In a metallic subwavelength grating structure with deep trenches backed by a ground plane, the ENZ mode can be coupled to both magnetic resonance and Fabry-Perot resonance respectively by tuning the bias. Decent light modulation can be obtained in a large operation wavelength band covering two resonances by optimizing the dual-resonance configuration. Such a reconfigurable efficient broadband modulation is important for robust communication link and possesses remarkable capacity for wavelength division multiplexing.

materials science, multidisciplinary,chemistry, physical,physics, applied,nanoscience & nanotechnology
Mid-Infrared Highly Efficient, Broadband, and Flattened Dispersive Wave Generation via Dual-Coupled Thin-Film Lithium-Niobate-on-Insulator Waveguide

Jing Jia,Zhe Kang,Qiangsheng Huang,Sailing He

DOI: https://doi.org/10.3390/app12189130

2022-01-01

Abstract:We designed a structure of dual-coupled ridge waveguide in thin-film lithium-niobate-on-insulator (LNOI) and numerically studied the highly efficient, broadband, and flattened dispersive wave-enhanced supercontinuum generation in the mid-infrared region. By leveraging the mode coupling of the proposed dual-coupled waveguide structure, one of the supermodes, namely the anti-symmetric mode, can produce additional zero-dispersion wavelengths in the mid-infrared region, and consequently multiple normal dispersion regions for dispersive wave emission. Given the rich geometrical degrees of freedom powered by this dual-coupled LNOI waveguide structure, we can tailor the dispersion profile so that a well-established mode-locked fiber laser in the telecommunication band can serve as the pump. Thus, the whole system can potentially be fiberto-chip integrated and packaged, enabling a compact, cost-effective, and low system-complexity platform. We numerically show that the broadband dispersive wave covering the wavelength range of 1.92 similar to 3.55 mu m (-20 dB level, near octave-spanning) with spectral flatness of 6.31 dB can be achieved using a 1550 nm, 190 pJ femtosecond pump seed. When the dual hump-shaped spectrum is obtained, the conversion efficiency of the mid-infrared dispersive wave can be up to 19.31%. The influence of the pumping conditions on the performance of mid-infrared dispersive wave generation was also studied. This work provides a competitive candidate for efficient, broadband, and flattened mid-infrared spectrum generation, which can find important applications in spectroscopy, metrology, and communication.
Nonlinear photonic crystal fibres: pushing the zero-dispersion toward the visible

Kunimasa Saitoh,Masanori Koshiba,Niels Asger Mortensen

DOI: https://doi.org/10.1088/1367-2630/8/9/207

2006-08-14

Abstract:The strong waveguide dispersion in photonic crystal fibres provides unique opportunities for nonlinear optics with a zero-dispersion wavelength $\lambda_0$ far below the limit of ~1.3 micron set by the material dispersion of silica. By tuning the air-hole diameter d, the pitch Lambda, and the number of rings of air holes N, the strong waveguide dispersion can in principle be used to extend lambda_0 well into the visible, albeit to some extend at the cost of multimode operation. We study in detail the interplay of the zero-dispersion wavelength, the cut-off wavelength lambda_c, and the leakage loss in the parameter space spanned by d, Lambda, and N. As a particular result we identify values of d (~500 nm) and Lambda (~700 nm) which facilitate the shortest possible zero-dispersion wavelength (~700 nm) while the fibre is still single-mode for longer wavelengths.

Optics
Microcavity dispersion engineering for the visible optical frequency comb generation

Canhua Xu,Jing Ma,Chaozhen Ke,Zhiping Zeng,Lituo Shen,Weixiang Weng,YanLei Zhang,Yantang Huang

DOI: https://doi.org/10.1063/1.5080126

IF: 4

2019-03-04

Applied Physics Letters

Abstract:Large normal material dispersion acts as an obstacle in the generation of visible optical frequency combs (OFCs) in microcavities. The trajectory separation of light propagation aggravates the dispersion unbalance in the visible region. Dispersion engineering devoted to compressing the separation reaches a bottleneck due to manufacturing difficulties. In this article, we demonstrated that the separation of the light trajectory can be used to manipulate the cavity dispersion. In a bilayer concentric spherical microcavity (CSM), the visible anomalous dispersion was achieved numerically by precisely matching the separated trajectory with the appropriate materials. Furthermore, we simulated the generation of an optical soliton in the visible region based on the proposed microcavity. Our work provides a clue for the visible dispersion control, and the proposed BK7/silica CSM will be an interesting platform for the visible OFC generation.

physics, applied
Broadband optical frequency comb generation in lithium niobate microring resonator by dispersion engineering

P. Wai,Feng Li,Zhaolong Shi,Dongmei Huang,Zihao Cheng

DOI: https://doi.org/10.1117/12.3009607

2023-11-24

Abstract:Thin film lithium niobate (LN) is considered a promising platform for integrated photonics owing to its exceptional electro-, nonlinear-, and acousto-optic properties. In this work, we propose the generation of broadband optical frequency combs in an LN microring resonator by dispersion engineering. We design the structure of the LN waveguide to adjust the effective refractive index of its fundamental mode so that the microring resonator can generate two dispersive waves near the pump light to achieve a broadband optical frequency comb up to 4/5-octave range (about 110 THz). The broadband frequency comb is crucial for future on-chip LN nonlinear photonics applications.

Physics,Engineering
Dispersion-optimized optical fiber for high-speed long-haul dense wavelength division multiplexing transmission.

Jindong Wu,Liuhua Chen,Qingguo Li,Wenwen Wu,Keyuan Sun,Xingkun Wu

DOI: https://doi.org/10.1364/AO.50.003538

IF: 1.9

2011-01-01

Applied Optics

Abstract:Four non-zero-dispersion-shifted fibers with almost the same large effective area (A(eff)) and optimized dispersion properties are realized by novel index profile designing and modified vapor axial deposition and modified chemical vapor deposition processes. An Aeff of greater than 71 mu m(2) is obtained for the designed fibers. Three of the developed fibers with positive dispersion are improved by reducing the 1550 nm dispersion slope from 0.072 ps/nm(2)/km to 0.063 ps/nm(2)/km or 0.05 p/nm(2)/km, increasing the 1550 nm dispersion from 4.972 ps/nm/km to 5.679 ps/nm/km or 7.776 ps/nm/km, and shifting the zero-dispersion wavelength from 1500 nm to 1450nm. One of these fibers is in good agreement with G655D and G. 656 fibers simultaneously, and another one with G655E and G. 656 fibers; both fibers are beneficial to high-bit long-haul dense wavelength division multiplexing systems over S-, C-, and L-bands. The fourth developed fiber with negative dispersion is also improved by reducing the 1550 nm dispersion slope from 0.12 ps/nm(2)/km to 0.085 ps/nm(2)/km, increasing the 1550 nm dispersion from -4 ps/nm/km to -6.016 ps/nm/km, providing facilities for a submarine transmission system. Experimental measurements indicate that the developed fibers all have excellent optical transmission and good macrobending and splice performances. (C) 2011 Optical Society of America

Ultra-Broadband Dispersion Engineering Of Nanophotonic Devices With Five Zero-Dispersion Wavelengths

Ultra-Broadband Dispersion Engineering Of Nanophotonic Waveguides

Broadband Noise-Like Pulse Generation at 1 Μm Via Dispersion and Nonlinearity Management.

Subwavelength-diameter optical fibers: waveguiding properties and photonic applications

Efficient dispersion engineering for three-octave-spanning supercontinuum generation in nanophotonic waveguides

Broadband Dispersion Engineering for Integrated Photonics Just by Tuning the Width of the Waveguide

Spatial-Mode-Coupling-Based Dispersion Engineering For Integrated Optical Waveguide

Efficient Design for Integrated Photonic Waveguides with Agile Dispersion

Dual Concentric-Ring-Core Fiber With Four Zero-Dispersion Wavelengths for Beyond Three-Octave OAM Supercontinuum Generation

Boosting dispersive wave emission via spectral phase shaping in nonlinear optical fibers

Broadband Dispersive Free, Large, and Ultrafast Nonlinear Material Platforms for Photonics

Ultrabroadband Second-Harmonic Generation Based on a Dispersion-Engineered Lithium Niobate on Insulator Waveguide

Multiple coherent OAM dispersive waves generation in dual concentric ring-core fiber

Single-mode Dispersion-engineered Nonlinear Integrated Waveguides for Ultra-broadband Optical Amplification and Wavelength Conversion

Design of Photonic Crystal Fibers with Anomalous Dispersion

Ultra-broadband spatial light modulation with dual-resonance coupled epsilon-near-zero materials

Mid-Infrared Highly Efficient, Broadband, and Flattened Dispersive Wave Generation via Dual-Coupled Thin-Film Lithium-Niobate-on-Insulator Waveguide

Nonlinear photonic crystal fibres: pushing the zero-dispersion toward the visible

Microcavity dispersion engineering for the visible optical frequency comb generation

Broadband optical frequency comb generation in lithium niobate microring resonator by dispersion engineering

Dispersion-optimized optical fiber for high-speed long-haul dense wavelength division multiplexing transmission.