Abstract:A simplified numerical method was proposed for computing the slip-line field, as well as the associated earth-pressure coefficient, in a cohesionless backfill with an inclined surface lying behind an inclined rough wall. The potential failure zone, in either active or passive cases, was divided into the Rankine zone, which was rigorously obtained by the theory of plasticity, and the transition zone being further divided into a series of triangular slices. Within the transition zone, the theoretical relationship between the inclination of the interslice force and that of the slip surface was established by satisfying the Mohr-Coulomb failure criterion, and equations involving the forces on a typical slice were formulated in accordance with the force and moment equilibrium conditions. An iterative procedure was presented for computing the lateral forces on the wall by adjusting the inclination of the slip surface until the stress condition on the upper boundary of the transition zone was satisfied, resulting in the two families of slip lines. Several examples demonstrate the slip-line field configurations, and the computed earth-pressure coefficients were found to agree fairly well with those of other numerical methods. Practical Applications The determination of earth pressures and the associated critical failure surface play an important role in the design of retaining walls and other problems of geotechnical engineering. Conventional methods are frequently used for this purpose, but the errors involved are sometimes unacceptably large in cases of inclined rough walls. Hence, certain numerical methods have been employed, which, despite their sophistication, have not yet approached exact solutions. This paper presents a simplified numerical procedure for approaching theoretical slip-line fields and earth-pressure coefficients for the most frequently encountered cases of inclined rough walls with inclined cohesionless backfills. With this method, no assumptions need to be made about the shape of the slip surface or the inclinations of the forces acting on the boundaries of the triangular slices, into which the potential slip zone is divided. Furthermore, both the stress equilibrium condition and the Mohr-Coulomb criterion were completely satisfied within the failure zone and on its boundaries. An effective iterative procedure was provided for determining the slip surface location, which converged rapidly, resulting in an approximately theoretical configuration of slip-line field and associated earth-pressure coefficient values if a sufficiently large number of triangular slices were employed.

A wall slip pressure gradient model of unclassified tailings paste in pipe flow: Theoretical and loop test study

Pressure drop of cemented high-concentration backfill in pipe flow: Loop test, model comparison and numerical simulation

Numerical simulation of pressure profile of mining backfill fly-ash slurry in an L-shaped pipe using a validated Herschel-Bulkley model

A New Comprehensive Model for Predicting the Pressure Drop of Flow in the Horizontal Wellbore

Pressure drop model of high-concentration graded particle transport in pipelines

Study of Passive Earth Pressures Against Translating Rigid Retaining Walls in Narrow Excavations

New Method for Computing Slip-Line Fields and Earth-Pressure Coefficients in Cohesionless Backfills

The Pressure Drop Model of Liquid Flow with Wall Mass Transfer in Horizontal Wellbore with Perforated Completion

Simulation of circular pipe flow of thixotropic cemented tailings pastes

Optimization and Extended Applicability of Simplified Slug Flow Model for Liquid-Gas Flow in Horizontal and Near Horizontal Pipes

Computational Fluid Dynamics Modeling of Slurry Flow in Horizontal Pipes: Effect of Specularity Coefficient on Hydraulic Gradient

Numerical Pressure Threshold Method to Simulate Cement Paste Slump Flow

Prediction of Post-Darcy Flow Based on the Spatial Non-Local Distribution of Hydraulic Gradient: Preliminary Assessment of Wastewater Management

Friction pressure drop model of gas-liquid two-phase flow in an inclined pipe with high gas and liquid velocities

Numerical Study of Resistance Loss and Erosive Wear during Pipe Transport of Paste Slurry

An Improved Method for Predicting Pressure Drop along Slurry Pipeline

Modeling fluctuating pressure in the eccentric annulus with a four-parameter rheological method

Study on Resistance Loss of Fly Ash Slurry Multistage High‐Pressure Grouting Pipeline Based on Fluent

Effect of Specularity Coefficient on Hydrodynamic Behaviors of Slurry Flows in Horizontal Pipes

Study on the Calculation of Pressure Gradient and Void Fraction in Horizontal Gas-Liquid Two-Phase Stratified Flow

Pressure Transient Behaviours of Vertical Wells in Low Permeability Reservoirs with Threshold Pressure Gradient