Abstract:Cemented high-concentration backfill (CHB) is an indispensable solution for mitigating risks associated with underground mining voids and surface tailings ponds. The accurate prediction of pressure drop of CHB in pipe flow is crucial for the design of backfilling systems. In this study, full factorial loop tests were conducted to obtain observed pressure drop data and rheological parameters of CHB, while considering the variables of binder content, solid fraction, and flow velocity. The rheometer method was also utilized to acquire the rheological parameters of CHB for comparison. Three analytical models and one numerical simulation method, which are considered highly accurate in the literature, were employed to predict the pressure drop of CHB in pipe flow. The findings indicate that the Buckingham model and the Darby–Melson model produce identical results as they are fundamentally equivalent. The Swamee–Aggarwal model and the single-phase flow simulation employ a similar mechanism as the Buckingham model, albeit with minor variations in mathematical treatment. The rheological parameters of CHB obtained through the rheometer method are considerably greater than those acquired by the loop test method, leading to significantly higher predicted pressure drop values from both the three analytical models and single-phase flow simulation when compared to the measured values. Whereas the mean deviation of the three analytical models is within 6.5% when employing rheological parameters of CHB determined by the loop test, with the Swamee–Aggarwal model being the most accurate, the mean error of single-phase flow simulation remains within 10%. It is suggested that the rheological parameters of CHB be determined through small-diameter loop testing. The Buckingham model and single-phase flow simulation are subsequently recommended for predicting pressure drop in industrial straight horizontal pipelines and complex piping systems, respectively. The results of this study facilitate the selection of the simplest method for accurately predicting the pressure drop of CHB in pipe flow.

Numerical simulation of pressure profile of mining backfill fly-ash slurry in an L-shaped pipe using a validated Herschel-Bulkley model

Numerical simulation on pressure drop of slush nitrogen flow inside a horizontal pipe

Numerical simulation of cutterhead and soil interaction in slurry shield tunneling

Method for calculating pressure losses in the pipelines of slurry shield tunneling based on coupled simulation of computational fluid dynamics and discrete element method

Numerical Study of Resistance Loss and Erosive Wear during Pipe Transport of Paste Slurry

Physical Modeling Study on Treatment of Waste Slurry with Vacuum Preloading at Bottom Combined with Upper Surcharge Loading

Pressure drop of cemented high-concentration backfill in pipe flow: Loop test, model comparison and numerical simulation

Study on Resistance Loss of Fly Ash Slurry Multistage High‐Pressure Grouting Pipeline Based on Fluent

Pipeline transportation characteristics of filling paste-like slurry pipeline in deep mine

Numerical simulation of solid liquid two phase flow featuring combination of drainage and fast dredging in mine emergency

Numerical Simulation and Optimization of Internal Flow Field in the High Pressure Coal Conveying Pump Based on the Dynamic Mesh

A CFD-based surrogate model for predicting slurry pipe flow pressure drops

Computational methodology for determination of head loss in both laminar and turbulent regimes for the flow of high concentration coal ash slurries through pipeline

Research on Numerical Simulation Method of Localized Loss for Slurry Flow in Pipeline

Pipeline Transport Performance of Paste Backfill Slurry in Long-Distance Underground Backfilling: A Review

Numerical Simulation of Liquid-Solid Two-Phase Flow in Slurry Pipeline Transportation

Hydrodynamic simulation of multi-sized high concentration slurry transport in pipelines

A wall slip pressure gradient model of unclassified tailings paste in pipe flow: Theoretical and loop test study

A novel hydro‐mechanical coupled multiphysics model for slurry penetration in sand with application to face stability analysis of shield tunnel

Numerical Simulation of Terrain-Induced Severe Slugging Coupled by Hydrodynamic Slugs in a Pipeline–riser System