Abstract:Well completion plays a key role in reservoir production as it serves as a pathway that connects the hydrocarbon bearing rock with the wellbore, allowing formation fluids (e.g. oil, gas, water) to flow into the well and then up to production facilities on the surface. Frac-packing completion (F&P) is a well stimulation technique that vastly increases the fluid transport capability of the near wellbore region in comparison with the original formation capacity by filling fractures and perforation tunnels with high-permeability proppant, thus enabling higher production rates for the same pressure drop. Hence, it is of interest for the production engineer to have an accurate description of the actual and predicted production performance in terms of pressure drop and flowrate after the F&P completion process is done. However, in developing a mathematical model of this scenario two critical challenges should be faced: (a) as fluid flows at high flowrates it begins to deviate from linear behavior, i.e. Darcy’s law is no longer valid, (b) compressible fluid flow behavior in the near wellbore region cannot be intuitively predicted due to the geometrical complexity introduced by the well completion (e.g. perforation tunnels and fractures). Additionally, this kind of mathematical model must take into account the existence of three different domains: reservoir (porous, low permeability), completion region (porous, high permeability), and free flow region. In view of these complications, this study presents a computational approach to model and characterize the near wellbore region with F&P completion using computational fluid dynamics (CFD) modeling, combining a non-linear (non-Darcy or Forchheimer) real gas flow in porous media with a turbulence model for the free flow region. This study is classified into three parts: 1) verification case, 2) Darcy vs. non-Darcy flow, and 3) erosion analysis. All simulation cases are assumed to be isothermal, steady state gas flow. Streamlines are implemented to identify the possible kinds of flow regimes, or patterns, in the near wellbore region and it is shown that gas flow pattern can be high unpredictable. Turbulence production and erosional velocity limit are also analyzed. Finally, mathematical correlations for well completion performance of this particular case study are derived using data curve fitting. In conclusion, the CFD approach has proven to be a powerful yet flexible computational tool that can help the production and/or reservoir engineer to predict flow behavior as well as production performance for a gas producing well with F&P completion, while providing an insightful graphical description of pressure and velocity distribution in the near wellbore region.

The Pressure Drop Model of Liquid Flow with Wall Mass Transfer in Horizontal Wellbore with Perforated Completion

A New Comprehensive Model for Predicting the Pressure Drop of Flow in the Horizontal Wellbore

Theoretical Approach for the Calculation of the Pressure Drop in a Multibranch Horizontal Well with Variable Mass Transfer

Experimental and Modeling Investigation on Gas-Liquid Two-Phase Flow in Horizontal Gas Wells

A New Way to Calculate Flow Pressure for Low Permeability Oil Well with Partially Penetrating Fracture

A New Model for Predicting Liquid Loading in Shale Gas Horizontal Wells

Cuttings-liquid frictional pressure loss model for horizontal narrow annular flow with rotating drillpipe

Construction and application of flow pressure drop model of perforated well considering pressure loss of perforation hole

A simple and accurate model to predict pressure drop in vertical gas wells

Transient Pressure Performance Analysis of Hydraulically Fractured Horizontal Well in Tight Oil Reservoir

A Computational Fluid Dynamics Approach to Predict Pressure Drop and Flow Behavior in the Near Wellbore Region of a Frac-Packed Gas Well

Novel Mathematical Model for Transient Pressure Analysis of Multifractured Horizontal Wells in Naturally Fractured Oil Reservoirs

Friction pressure drop model of gas-liquid two-phase flow in an inclined pipe with high gas and liquid velocities

Numerical Simulation of Unsteady-State Flow in Dual Porous Coalbed Methane Horizontal Wells with Complex Boundary Conditions

Investigation of flow regimes, pressure drop, void fraction, film thickness, friction factor and production of two-phase flow in a perforated horizontal wellbore

A model for proppant dynamics in a perforated wellbore

A pressure drop model of post-fracturing shut-in considering the effect of fracturing-fluid imbibition and oil replacement

A Semianalytical Model for Advanced Description of Pressure Drop Funnel during Coalbed Methane Production

An Analytical Method for Determining the Bottom‐Hole Pressure of Vertical Well With Multiple Fractures

Research progress on the calculation model of critical liquid carrying flow of gas well

Model and Analysis of Pump-Stopping Pressure Drop with Consideration of Hydraulic Fracture Network in Tight Oil Reservoirs