Abstract:In this study, we propose several CsSnBr3-based PSC configurations using the Solar Cell Capacitance Simulator (SCAPS-1D), incorporating various efficient Electron transport layers (ETLs) such as TiO2, PCBM, WS2, SnO2, ZnO, IGZO, C60, and Hole transport layers (HTLs) like CBTS, CFTS, CuO, CuI, Spiro-OMeTAD, PEDOT:PSS, P3HT, CuSbS2, CuSCN, and Cu2O. Numerical simulation results reveal that the device structure ITO/WS2/CsSnBr3/Cu2O/Au exhibits outstanding power conversion efficiency (PCE), retaining the closest photovoltaic parameter values among 70 different configurations. In this configuration, WS2 served as the ETL, and Cu2O acted as the HTL. This device achieved an outstanding peak PCE of 20.02 %. It also boasted a high open circuit voltage (Voc) of 1.23 V, a short circuit current density (Jsc) of 19.32 mA/cm2, and an impressive fill factor (FF) of 84.18 %. In comparison, devices utilizing materials like TiO2, PCBM, SnO2, ZnO, IGZO, and C60 yielded PCE values of 19.72, 19.73, 19.72, 19.73, 19.72, and 15.60 %, respectively. Furthermore, for the seven best-performing configurations, we investigated the effects of CsSnBr3 absorber thickness, absorber-acceptor doping density (NA), conduction band offset (CBO), ETL doping density (ND), Capacitance-Voltage (C-V), Mott–Schottky (M-S) characteristics, generation and recombination rates, series resistance (Rse), shunt resistance (Rsh), temperature, current–voltage characteristics (J-V), and quantum efficiency (QE) on performance metrics. Our findings indicate that all seven ETLs, when combined with Cu2O HTL, can serve as excellent materials for fabricating high-efficiency CsSnBr3-based PSCs with the ITO/ETL/CsSnBr3/Cu2O/Au structure. To validate our results, we compared the simulation outcomes obtained with SCAPS-1D for the best seven CsSnBr3-PSC configurations with previously published research works. This comprehensive simulation study opens a promising avenue for the cost-effective production of high-performance, lead-free CsSnBr3-based PSCs, contributing to a greener and pollution-free environment.

Emerging BaZrS 3 and Ba(Zr,Ti)S 3 Chalcogenide Perovskite Solar Cells: A Numerical Approach Toward Device Engineering and Unlocking Efficiency

Numerical investigation of a high efficiency BaZrxTi1-xS3 chalcogenide perovskite solar cell

A numerical simulation and analysis of chalcogenide BaZrS 3 -based perovskite solar cells utilizing different hole transport materials

Unlocking the Potential of Emerging SrZrSe3 Solar Cells with Diverse Inorganic Metal Sulfide Hole Transport Layers

Numerical simulation based performance enhancement approach for an inorganic BaZrS3/CuO heterojunction solar cell

High Performance Inverted RbCsFAPbI3 Perovskite Solar Cells Based on Interface Engineering and Defects Passivation.

Boosting efficiency above 28% using effective charge transport layer with Sr3SbI3 based novel inorganic perovskite

Assessing carrier mobility, dopability, and defect tolerance in the chalcogenide perovskite BaZrS$_3$

Device modelling and performance analysis of chalcogenide perovskite-based solar cell with diverse hole transport materials and back contact metals

Numerical modeling of a novel solar cell system consisting of electron Transport material (ETM)/CaZrS 3 -based chalcogenide perovskites using SCAPS-1D software

Numerical analysis and device modelling of a lead-free Sr3PI3/Sr3SbI3 double absorber solar cell for enhanced efficiency

CHTS/Zn2P3-based solar cells with enhanced efficiency through ETL engineering: A numerical study

Physical properties and power conversion efficiency of SrZrX3 (X[math][math][math]S and Se) chalcogenide perovskite solar cell

Performance evaluation of inorganic Cs 3 Bi 2 I 9 -based perovskite solar cells with BaSnO 3 charge transport layer

Effect of various electron and hole transport layers on the performance of CsPbI3-based perovskite solar cells: A numerical investigation in DFT, SCAPS-1D, and wxAMPS frameworks

Analysis of Si Back‐Contact for Chalcogenide Perovskite Solar Cells Based on BaZrS3 Using SCAPS‐1D

ETL and HTL Engineering in CH3NH3PbBr3 Perovskite for Stable and Efficient Performance Photovoltaic Devices Applications using SCAPS‐ 1D

Design and Optimization of High-Performance Novel RbPbBr 3 -Based Solar Cells with Wide-Band-Gap S-Chalcogenide Electron Transport Layers (ETLs)

Analysis of Lead Free CsSnBr3 based Perovskite Solar cells utilizing Numerical Modeling

Ti-Alloying of BaZrS 3 Chalcogenide Perovskite for Photovoltaics

Solar power conversion: CuI hole transport layer and Ba3NCl3 absorber enable advanced solar cell technology boosting efficiency over 30