Abstract:In this study, we propose several CsSnBr3-based PSC configurations using the Solar Cell Capacitance Simulator (SCAPS-1D), incorporating various efficient Electron transport layers (ETLs) such as TiO2, PCBM, WS2, SnO2, ZnO, IGZO, C60, and Hole transport layers (HTLs) like CBTS, CFTS, CuO, CuI, Spiro-OMeTAD, PEDOT:PSS, P3HT, CuSbS2, CuSCN, and Cu2O. Numerical simulation results reveal that the device structure ITO/WS2/CsSnBr3/Cu2O/Au exhibits outstanding power conversion efficiency (PCE), retaining the closest photovoltaic parameter values among 70 different configurations. In this configuration, WS2 served as the ETL, and Cu2O acted as the HTL. This device achieved an outstanding peak PCE of 20.02 %. It also boasted a high open circuit voltage (Voc) of 1.23 V, a short circuit current density (Jsc) of 19.32 mA/cm2, and an impressive fill factor (FF) of 84.18 %. In comparison, devices utilizing materials like TiO2, PCBM, SnO2, ZnO, IGZO, and C60 yielded PCE values of 19.72, 19.73, 19.72, 19.73, 19.72, and 15.60 %, respectively. Furthermore, for the seven best-performing configurations, we investigated the effects of CsSnBr3 absorber thickness, absorber-acceptor doping density (NA), conduction band offset (CBO), ETL doping density (ND), Capacitance-Voltage (C-V), Mott–Schottky (M-S) characteristics, generation and recombination rates, series resistance (Rse), shunt resistance (Rsh), temperature, current–voltage characteristics (J-V), and quantum efficiency (QE) on performance metrics. Our findings indicate that all seven ETLs, when combined with Cu2O HTL, can serve as excellent materials for fabricating high-efficiency CsSnBr3-based PSCs with the ITO/ETL/CsSnBr3/Cu2O/Au structure. To validate our results, we compared the simulation outcomes obtained with SCAPS-1D for the best seven CsSnBr3-PSC configurations with previously published research works. This comprehensive simulation study opens a promising avenue for the cost-effective production of high-performance, lead-free CsSnBr3-based PSCs, contributing to a greener and pollution-free environment.

Numerical modeling of a novel solar cell system consisting of electron Transport material (ETM)/CaZrS 3 -based chalcogenide perovskites using SCAPS-1D software

SCAPS-1D Simulation for Device Optimization to Improve Efficiency in Lead-Free CsSnI3 Perovskite Solar Cells

Numerical analysis of high performance perovskite solar cells with stacked ETLs/C60 using SCAPS-1D device simulator

Numerical simulation based performance enhancement approach for an inorganic BaZrS3/CuO heterojunction solar cell

SCAPS simulation of novel inorganic ZrS2/CuO heterojunction solar cells

Analysis of Lead Free CsSnBr3 based Perovskite Solar cells utilizing Numerical Modeling

Simulation and modeling of a new CsSnI3 solar cell structure: A numerical study

CHTS/Zn2P3-based solar cells with enhanced efficiency through ETL engineering: A numerical study

Numerical Simulation and Optimization of Highly Stable and Efficient Lead-Free Perovskite FA1−xCsxSnI3-Based Solar Cells Using SCAPS

Study and Optimization of a New Perovskite Solar Cell Structure Based on the Two Absorber Materials Cs2TiBr6 and MASnBr3 Using SCAPS 1D

SCAPS study on the effect of various hole transport layer on highly efficient 31.86% eco-friendly CZTS based solar cell

A numerical simulation and analysis of chalcogenide BaZrS 3 -based perovskite solar cells utilizing different hole transport materials

Design and simulation of CsPb.625Zn.375IBr2-based perovskite solar cells with different charge transport layers for efficiency enhancement

A comprehensive study of the optimization and comparison of cesium halide perovskite solar cells using ZnO and Cu2FeSnS4 as charge transport layers

SCAPS 1D based study of hole and electron transfer layers to improve MoS2−ZrS2 solar cell efficiency

A Numerical Simulation for Efficiency Enhancement of CZTS Based Thin Film Solar Cell Using SCAPS-1D

Improving the perovskite solar cell by insertion of methyl ammonium tin oxide and cesium tin chloride as absorber layers: scaps 1d study based on experimental studies

Simulation of perovskite solar cells by using CuSCN as an inorganic hole-transport material

Design and simulation of a new kesterite solar cell structure with and without a perovskite Back Surface Field layer to exceed 32% efficiency

Study of a Lead-Free Perovskite Solar Cell Using CZTS as HTL to Achieve a 20% PCE by SCAPS-1D Simulation

Examining Compatible Electron Transport Layers for CsSnBr3‐Based Solar Cell to Boost Photovoltaic Stability and Efficiency