Four-mode Waveguide Crossing Via Digitized Meta-Structure

Yingjie Liu,Zhongqiu Zhong,Shuai Wang,Yilin Liu,Yong Yao,Jiangbing Du,Qinghai Song,Ke Xu

DOI: https://doi.org/10.1364/ofc.2021.f2b.3

2021-01-01

Abstract:A four-mode waveguide crossing with footprint of only 7.5×7.5 μm 2 is demonstrated on silicon photonic platform. The device insertion loss is less than 0.85 dB, and the crosstalk is below -18 dB for 1500-1580 nm.

What problem does this paper attempt to address?

5×5 Μm2 Compact Waveguide Crossing Optimized by Genetic Algorithm

Pengfei Xu,Yanfeng Zhang,Zengkai Shao,Chunchuan Yang,Lin Liu,Yujie Chen,Siyuan Yu

DOI: https://doi.org/10.1364/acpc.2017.m2d.2

2017-01-01

Abstract:Waveguide crossing device is a fundamental building block for isolated propagation of two cross waveguides in silicon photonics. In this work, a genetic algorithm optimized compact silicon waveguide crossing of 5x5 mu m(2) for fundamental Transverse Electric (TE) mode is designed, fabricated, and tested. A measured insertion loss of 0.1-0.3 dB with a crosstalk of <-35 dB is achieved in such design scheme.
High performance ultra-compact SOI waveguide crossing.

Hai-Long Han,He Li,Xiao-Pei Zhang,Ang Liu,Tian-Ying Lin,Ze Chen,Hai-Bin Lv,Ming-Hui Lu,Xiao-Ping Liu,Yan-Feng Chen

DOI: https://doi.org/10.1364/OE.26.025602

IF: 3.8

2018-01-01

Optics Express

Abstract:Waveguide crossing is an important integrated photonic component that will be routinely used for high-density and large-scale photonic integrated circuits, such as optical switches and routers. Several techniques have been reported in achieving high performance waveguide crossings on a silicon-on-insulator photonic platform, i.e., low-loss and low-crosstalk waveguide crossings based on multimode interference, bi-layer tapering, optical transformation, metamaterials, and subwavelength gratings. Until recently, not much attention has been given to the reduction of the footprint of waveguide crossings. Here we experimentally demonstrate an ultra-compact waveguide crossing on silicon photonic platform with a footprint only similar to 1 x 1 mu m(2). Our simulations show that it has a low insertion loss (< 0.175 dB) and low crosstalk (< -37dB) across the whole C-band, while the fabricated one has an insertion loss < 0.28 dB and crosstalk around -30 dB for the C-band. (C) 2018 Optical Society of America under the terms of the OSA Open Access Publishing Agreement
Ultralow-loss Waveguide Crossing for Photonic Integrated Circuits by Using Inverted Tapers

Lin Han,Xiaoke Ruan,Weijie Tang,Tao Chu

DOI: https://doi.org/10.1364/oe.451104

IF: 3.8

2022-01-01

Optics Express

Abstract:An ultralow-loss silicon planar waveguide crossing operating in the O-band was experimentally demonstrated based on the Gaussian beam synthesis method. Elliptical parabolic inverted tapers were introduced in our design to reduce the crossing loss. According to the measurement results, the proposed device exhibits an insertion loss of 0.008 dB, which is the lowest reported loss for planar silicon waveguide crossings operating in the O-band. The device exhibits a low crosstalk below -40 dB over a 40 nm wavelength range with a compact footprint of 18 × 18 µm2 and can be fabricated in a complementary metal-oxide-semiconductor-compatible process.
An Eight-Channel 400 GHz-Spacing Etched Diffraction Grating Multi/Demultiplexer on a Nanophotonic Silicon-on-Insulator Platform

shen ao,qiu chen,hu ting,xu chao,jiang xiaoqing,li yubo,yang jianyi

DOI: https://doi.org/10.1088/0256-307X/30/8/084204

2013-01-01

Chinese Physics Letters

Abstract:An eight-channel 400 GHz-spacing planar waveguide multi/demultiplexer employing etched diffraction grating is designed and fabricated on a silicon-on-insulator platform with a 220 nm thick top layer. The design parameters are optimized by scalar diffraction simulation to obtain optimal performance with a small footprint of only 0.75 mm(2). A bi-level adiabatic taper is used to connect the input/output waveguide and the slab waveguide so as to reduce the insertion loss and the broadening of the diffraction angle of the propagating light. The device is fabricated in a two-step process with E-beam lithography and dry etching, and the alignment accuracy is 10 nm or even better. Measurements show that the insertion loss is 7.35 dB and the crosstalk between adjacent channels is about -15 dB. Ways to improve the performance are also investigated in detail.
Silicon Multimode Waveguide Crossing Based on Anisotropic Subwavelength Gratings

Weike Zhao,Xiaolin Yi,Yingying Peng,Long Zhang,Haitao Chen,Daoxin Dai

DOI: https://doi.org/10.1002/lpor.202100623

2022-01-01

LASER & PHOTONICS REVIEWS

Abstract:Multimode waveguide crossings (MWCs) are becoming more and more important as one of the key elements for on-chip optical routing and cross-connection. However, it is still very challenging to achieve scalable MWCs with compact footprints, low excess losses (ELs), and low intermode cross-talks (CTs). This work demonstrates an unprecedented silicon MWC with high performances by using the anisotropy of one-/two-dimensional (1D/2D) subwavelength grating (SWG) structures. For the proposed silicon MWC, the 2D-SWG crossing region at the center has a higher refractive index than the 1D-SWG regions at both sides for the guided-modes of TE polarization, due to the anisotropy of the 1D/2D SWGs. As a result, the crossing region can be equivalent to a straight waveguide, and the launched TE modes can transmit through the crossing region with negligible ELs and low intermode CTs. Such an MWC can be scaled very flexibly and easily according to the new principle. The fabricated three-mode MWC with a footprint of 14.8 x 14.8 mu m(2) shows ELs of <0.26 dB and intermode CTs of <-20 dB in the wavelength range of 1525-1605 nm.
Compact Silicon Photonic Waveguide Crossings with Sub- 10-Mdb Loss

Yingying Peng,Huan Li,Daoxin Dai

DOI: https://doi.org/10.1364/acpc.2021.t4a.130

2021-01-01

Abstract:We have designed and experimentally demonstrated silicon photonic waveguide crossings for the TE fundamental mode with record-low loss of $6\pm 2\ \text{mdB}$ in the wavelength range of 1520–1560 nm.
Wavelength-selective 4 × 4 Nonblocking Silicon Optical Router for Networks-on-chip.

Ting Hu,Huiye Qiu,Ping Yu,Chen Qiu,Wanjun Wang,Xiaoqing Jiang,Mei Yang,Jianyi Yang

DOI: https://doi.org/10.1364/ol.36.004710

2011-01-01

Abstract:We design and fabricate a wavelength-selective nonblocking 4 × 4 silicon optical router based on microring resonator for use in future integrated photonic interconnection networks. We successfully demonstrate 12 possible I/O routing paths and present 13 nonblocking operating states, including four broadcasting states, with worst-case extinction ratio and cross talk of 21.05 and -21.56 dB, respectively. Thermal tuning is employed to compensate the resonance shift of microring resonators caused by fabrication errors and adjust the resonance to match the International Telecommunication Unit grid with the channel spacing of 100 GHz.
A Compact and Polarization-Insensitive Silicon Waveguide Crossing Based on Subwavelength Grating MMI Couplers

Sailong Wu,Simei Mao,Lidan Zhou,Lin Liu,Yujie Chen,Xin Mu,Lirong Cheng,Zhenmin Chen,Xin Tu,H. Y. Fu

DOI: https://doi.org/10.1364/oe.399568

IF: 3.8

2020-01-01

Optics Express

Abstract:In this work, we proposed and experimentally demonstrated a compact and low polarization-dependent silicon waveguide crossing based on subwavelength grating multimode interference couplers. The subwavelength grating structure decreases the effective refractive index difference and shrinks the device footprint. Our designed device is fabricated on the 220-nm SOI platform and performs well. The measured crossing is characterized with low insertion loss (< 1 dB), low polarization-dependence loss (< 0.6 dB), and low crosstalk (< -35 dB) for both TE and TM polarizations with a compact footprint of 12.5 μm × 12.5 μm.
Robust TE0 + TE1 Waveguide Crossing

Pengfei Xu,Yanfeng Zhang,Yujie Chen,Siyuan Yu

DOI: https://doi.org/10.1364/cleopr.2018.w3a.118

2018-01-01

Abstract:We proposed a silicon waveguide crossing device supporting both TE0 and TEl modes, TE0 mode insertion loss about -1 ~ -1.2 dB and TE1 insertion loss about -0.5 ~ -1 dB, and the crosstalk is better than -30 dB.
Compact and broadband dual-polarization waveguide crossing utilizing subwavelength-hole-assisted MMI couplers

Bin Ni,Chenyang Luo,Hanyue Chen,Shengbao Wu,Lianping Hou,Hao Liu,Jichuan Xiong

DOI: https://doi.org/10.1364/ol.505887

IF: 3.6

2023-11-14

Optics Letters

Abstract:In this Letter, an ultracompact silicon-based waveguide crossing for dual polarizations is proposed and experimentally demonstrated using subwavelength-hole-assisted multimode interference couplers. Thanks to the flexible and easy dispersion engineering in the introduced subwavelength-hole-assisted multimode interference couplers, the reduced and equal beat lengths for dual polarizations are accessible via careful parametric optimization, consequently enabling a substantially reduced device size. Experimental results indicate that the proposed crossing (13.6 × 13.6 μm 2 in size) features a low insertion loss of 1.03 dB (0.76 dB) and low crosstalk of –32.5 dB (–37.8 dB) at a central wavelength of 1550 nm for TE (TM) mode, with a broad bandwidth of ∼80 nm for crosstalk of <–18 dB.

optics
Compact Dual-Mode Waveguide Crossing Based on Adjoint Shape Optimization.

Caiyue Zhao,Lirong Cheng,Houyu Chen,Simei Mao,Yinghui Wang,Qian Li,H. Y. Fu

DOI: https://doi.org/10.1364/ol.495310

IF: 3.6

2023-01-01

Optics Letters

Abstract:We design, fabricate, and characterize a compact dual-mode waveguide crossing on a silicon-on-insulator platform. The dual-mode waveguide crossing with high performance is designed by utilizing the adjoint shape optimization. This adjoint-method-based optimization algorithm is computationally efficient and yields the optimal solution in fewer iterations compared with other iterative schemes. Our proposed dual-mode waveguide crossing exhibits low insertion loss and low crosstalk. Experimental results show that the insertion losses at the wavelength of 1550 nm are 0.83 dB and 0.50 dB for TE0 and TE1 modes, respectively. The crosstalk is less than −20 dB for the two modes over a wavelength range of 80 nm. The footprint of the whole structure is only 5 × 5 μm2.
Ultra-compact arrayed waveguide grating triplexer based on silicon-on-insulator platform

Jun Zou,Xianxin Jiang,Tingting Lang,Jianjun He

DOI: https://doi.org/10.1109/CLEOPR.2013.6600263

2013-01-01

Abstract:We have demonstrated an ultra-compact birefringence-compensated arrayed waveguide grating (AWG) triplexer based on silicon nanowire waveguide. The cross-order design is employed and the device has a small footprint of 0.18×0.12 mm2. The normalized losses for TM polarization for three channels are less than 4 dB with the crosstalk better than 18 dB. The polarization dependent wavelength shift (PDλ) is less than 2.5 nm for three channels operating at the wavelength range of 1490-1550 nm by using angled star couplers in combination with different diffraction orders for the two polarizations.
Ultra-Low Loss and Ultra-Compact Polarization-Insensitive SOI Multimode Waveguide Crossing Based on an Inverse Design Method

Lu Wang,Hongquan Zhou,Hao Shi,Chengqiang Zhao,Chuanqi Ma,Yanqing Wu,Renzhong Tai

DOI: https://doi.org/10.3390/photonics11121137

IF: 2.536

2024-12-04

Photonics

Abstract:Polarization-insensitive waveguide crossings are indispensable components of photonic integrated circuits (PICs), enabling the concurrent computing of optical signals from diverse waveguides inside the limits of a restricted spatial footprint. Leveraging mirror symmetry direct binary search, we successfully demonstrate an ultra-compact and ultra-low loss polarization-insensitive waveguide crossing that achieves insertion losses below −0.11 dB and crosstalk levels beneath −22.6 dB for transverse electric (TE) mode, as well as insertion losses below 0.05 dB and crosstalk levels beneath −24.5 dB for transverse magnetic (TM) mode across the C-band with a footprint of 3 × 4 μm2. The results confirm that this mirror symmetry optimization method yields high-efficiency devices while reducing computational time. We believe this high-efficiency polarization-insensitive waveguide crossing can have potential applications in dense PIC systems.

optics
Four-Port Silicon Multi-Wavelength Optical Router for Photonic Networks-on-Chip

Ting Hu,Haifeng Shao,Longzhi Yang,Chao Xu,Mei Yang,Hui Yu,Xiaoqing Jiang,Jianyi Yang

DOI: https://doi.org/10.1109/lpt.2013.2285171

IF: 2.6

2013-01-01

IEEE Photonics Technology Letters

Abstract:We design and fabricate a four-port wavelength-selective optical router on silicon-on-insulator wafer for photonic networks-on-chip. The router consists of four basic operation blocks. Each is constructed by one microring resonator (MRR) based add-drop filter rather than the traditional two microrings based 2 x 2 optical crossbar. It can provide multiwavelength routing for each path to increase the aggregate data transmission bandwidth. The possible 12 I/O routing paths are experimentally observed in the transmission spectra and each of them has the ability to route four group wavelengths simultaneously in the measured spectral range. The device has a small footprint (similar to 78 x 100 mu m(2)) and low power consumption (6.58 mW).
Metamaterial‐Based Maxwell's Fisheye Lens for Multimode Waveguide Crossing

Hongnan Xu,Yaocheng Shi

DOI: https://doi.org/10.1002/lpor.201800094

2018-01-01

LASER & PHOTONICS REVIEWS

Abstract:On-chip multimode transmission has drawn tremendous interest for its ability to expand the link capacity with a single wavelength carrier. The waveguide crossing is a basic component in the on-chip photonic circuit allowing the routing of a complex network. The situation has arisen where the multimode waveguide crossing is required to achieve the high-density multimode networks. However, the conventional designs of the waveguide crossing only work for the single-mode. Some works have been reported which realize the multimode crossing, but all suffer from significant losses. Here a multimode waveguide star-crossing is proposed using the metamaterial-based Maxwell's fisheye lens, where four multimode waveguides converge at a single junction. The index-engineered silicon metamaterial is utilized to obtain the Maxwell's fisheye lens on the silicon-on-insulator platform. By combining the Maxwell's fisheye lens and tapered waveguides, both TM0 and TM1 modes propagate through the star-crossing with low losses and cross talk. The fabricated multimode waveguide star-crossing shows low losses of <0.3dB and cross talk of <-20dB.
Compact and Low Cross-Talk Silicon-on-insulator Crossing Using a Periodic Dielectric Waveguide.

Junbo Feng,Qunqing Li,Shoushan Fan

DOI: https://doi.org/10.1364/ol.35.003904

IF: 3.6

2010-01-01

Optics Letters

Abstract:We propose and experimentally demonstrate a compact, highly efficient, and negligible cross-talk silicon-on-insulator crossing using a periodic dielectric waveguide. The crossing occupies a footprint of less than 4 mu m x 4 mu m. Around 0.7 dB insertion loss and lower than -40 dB, cross talk was achieved experimentally over a broad wavelength range. (C) 2010 Optical Society of America
Low-Loss Waveguide Crossing for Complicated On-Chip Microwave Photonic Processor

Ziyang Lu,Jiachen Li,Hongwei Chen,Sigang Yang,Minghua Chen

DOI: https://doi.org/10.1109/jphot.2024.3366937

IF: 2.4

2024-03-15

IEEE Photonics Journal

Abstract:To realize large device density and high complexity in future on-chip microwave photonic system, a waveguide crossing with low loss, crosstalk and reflection is designed on the silicon nitride waveguide platform, which is compatible for on-chip microwave photonic processor. Furthermore, a multi-channel microwave photonic signal processing chip is fabricated based on the proposed waveguide crossings, and the performance of the chip is evaluated. In simulation, the proposed waveguide crossing maintains an insertion loss of ∼0.08 dB per crossing in the wavelength range of 1500 nm – 1600 nm, while the experiment result is 0.086 dB per crossing. As the wavelength changes, the measured variation of insertion loss per crossing is less than 0.02 dB. The crossings on the signal processing chip induce an extra insertion loss of 1.2 dB to each channel. Meanwhile, the measured crosstalk and reflection are both below −44 dB. Furthermore, the proposed waveguide crossing shows significant robustness for fabrication. With the advantages of ultra-low loss, crosstalk and reflection, the proposed waveguide crossing may support the establishment for future complicated on-chip microwave photonic systems.

engineering, electrical & electronic,optics,physics, applied
Non-blocking Wavelength-Routed 4&#x00d7;4 Silicon Optical Router for On-Chip Photonics Networks

Ting Hu,Ping Yu,Chuntian Qiu,Wanjun Wang,Huiye Qiu,Ao Shen,Xiaoqing Jiang,Mei Yang,Jianyi Yang

DOI: https://doi.org/10.1109/oic.2012.6224425

2012-01-01

Abstract:A non-blocking 4×4 optical router based on silicon microring resonators is reported. Thirteen operating states are presented and 12 I/O possible routing paths are verified with the worst crosstalk of -21.56 dB.
Polarization-insensitive Silicon Waveguide Crossing Based on Multimode Interference Couplers.

Jingye Chen,Yaocheng Shi

DOI: https://doi.org/10.1364/ol.43.005961

IF: 3.6

2018-01-01

Optics Letters

Abstract:A polarization-insensitive waveguide crossing based on multimode interference (MMI) couplers is proposed and demonstrated on a silicon-on-insulator (SOI) platform. By utilizing two orthogonal MMIs, the footprint of the device is about 23 μm×23 μm. The proposed device, easily fabricated with only one fully etched step, is characterized with low insertion losses and low crosstalks for both transverse-electric and transverse-magnetic polarizations from 1520 to 1610 nm bands.
Electro-Optic Silicon Modulator With Horizontal Photonic Crystal Slot Slab

Biao Qi,Fan Wang,Simiao Xiao,Xiang Wang,Yinlei Hao,Xiaoqing Jiang,Minghua Wang,Jianyi Yang

DOI: https://doi.org/10.1117/12.806515

2009-01-01

Abstract:The properties of truly confined modes of a 2D hex horizontal photonic crystal slot slab waveguide are analyzed. Then the dispersion of liner defect waveguide is calculated. In addition, what influence the slots with different height have over the band structure and the group velocity dispersion of the defect mode waveguide are analyzed. Based on these studies, an ultra-compact silicon-based Mach-Zehnder amplitude modulator is proposed. For a design with almost negligible first order chromatic dispersion in an optical bandwidth of 1THz, we predict a modulation bandwidth of 40GHz and a length of about 80 mu m. This is achieved by infiltrating an electro-optic polymer into a slotted photonic crystal waveguide, the strong field confinement in slotted waveguides and the slow light interaction enhancements provided by the photonic crystal waveguide, where group velocity and dispersion may be controlled.

Four-mode Waveguide Crossing Via Digitized Meta-Structure

5×5 Μm2 Compact Waveguide Crossing Optimized by Genetic Algorithm

High performance ultra-compact SOI waveguide crossing.

Ultralow-loss Waveguide Crossing for Photonic Integrated Circuits by Using Inverted Tapers

An Eight-Channel 400 GHz-Spacing Etched Diffraction Grating Multi/Demultiplexer on a Nanophotonic Silicon-on-Insulator Platform

Silicon Multimode Waveguide Crossing Based on Anisotropic Subwavelength Gratings

Compact Silicon Photonic Waveguide Crossings with Sub- 10-Mdb Loss

Wavelength-selective 4 × 4 Nonblocking Silicon Optical Router for Networks-on-chip.

A Compact and Polarization-Insensitive Silicon Waveguide Crossing Based on Subwavelength Grating MMI Couplers

Robust TE0 + TE1 Waveguide Crossing

Compact and broadband dual-polarization waveguide crossing utilizing subwavelength-hole-assisted MMI couplers

Compact Dual-Mode Waveguide Crossing Based on Adjoint Shape Optimization.

Ultra-compact arrayed waveguide grating triplexer based on silicon-on-insulator platform

Ultra-Low Loss and Ultra-Compact Polarization-Insensitive SOI Multimode Waveguide Crossing Based on an Inverse Design Method

Four-Port Silicon Multi-Wavelength Optical Router for Photonic Networks-on-Chip

Metamaterial‐Based Maxwell's Fisheye Lens for Multimode Waveguide Crossing

Compact and Low Cross-Talk Silicon-on-insulator Crossing Using a Periodic Dielectric Waveguide.

Low-Loss Waveguide Crossing for Complicated On-Chip Microwave Photonic Processor

Non-blocking Wavelength-Routed 4&amp;#x00d7;4 Silicon Optical Router for On-Chip Photonics Networks

Polarization-insensitive Silicon Waveguide Crossing Based on Multimode Interference Couplers.

Electro-Optic Silicon Modulator With Horizontal Photonic Crystal Slot Slab

Non-blocking Wavelength-Routed 4×4 Silicon Optical Router for On-Chip Photonics Networks