Abstract:<p>A multiple principal elements CuAl10Fe5Ni5Mn1.2 alloy is widely used in the bearing bracket of high speed railway, nuclear power and marine engineering. In traditional metal materials, the evolution of strength and elongation are mutually inconsistent. The multiple principal elements CuAl10Fe5Ni5Mn1.2(wt%) alloy shows the simultaneous improvement of strength and toughness. The present work has systematically studied the strengthening and plasticity behaviors of CuAl10Fe5Ni5Mn1.2(wt%) alloy under complex stirring. The mechanisms responsible for both increasing its strength and plasticity were clarified. It is found that the properties of novel Al10Fe5Ni5Mn1.2 (wt%) alloy are better than other aluminum bronze alloys. Its Rm is 729 MPa, A<sub>5.65</sub> is 16% and yield strength (Rp0.2) is 382 MPa. K phases with nano structures distribute in the grains boundaries complete boundaries strengthening. Schmid factor for the basal slip system is from 0.3 to 0.5, which could largely contribute to grain boundary migration and grain rotation. Twinning deformation is initiated and it can open the low angle grain boundaries (LAGBs) and media angle grain boundaries (MAGBs), so the proper combination of strain hardening and plastic deformation enables CuAl10Fe5Ni5Mn1.2 wt% to undergo uniform deformation with micro-nano structures, result in increasing the toughness. The solid solution forms atom scale strengthening. Nano-structures and micron K phase form nano-micro scale strengthening, respectively. Multi-scales strengthening and twinning deformation opening the LAGBs and MAGBs, resulting in increasing both strength and plasticity on the novel CuAl10Fe5Ni5Mn1.2 wt% alloy.</p>

High Strength NiMnFeCrAlCu Multi-Principal-element Alloys with Marine Application Perspective

Correlation of microstructure, mechanical properties and corrosion behavior in a Ni34Co28Cr28Al10 multi-principal element alloy with outstanding corrosion resistance

Corrosion resistance improvement of multi-principal element alloy by tailored structure with heterogeneous grains

Simultaneously Improving Strength and Corrosion Resistance of CoCrNi-based Multi-Principal Element Alloys Via Alloying with Mo Content

Recent Advances Of Nickel-Aluminum Bronze (Nab)

High-strength, ductility and corrosion-resistant in a novel Cu20Ni20Mn0.3Cr0.3Al alloy

Mechanical behaviors of novel multiple principal elements CuAl10Fe5Ni5Mn1.2 wt% with micro-nano structures

Effects of Al addition on corrosion behavior and mechanical property of high-strength and high-elasticity Cu-20Ni-20Mn-0.3Nb-0.3Cr-0.3Zr alloy

Strategy for co-enhancement of corrosion resistance-strength of Cu-7Ni-3Al-1Fe-1Mn alloy: Rare earth Sm microalloying

High-performance AlCoCrFeNi High Entropy Alloy with Marine Application Perspective

Exceptional strength-ductility synergy achieved by spinodal decomposition in a high Cu content high-entropy alloy

Effective combination of solid solution strengthening and precipitation hardening in NiCrFeWTiAl multi-principal element alloys

Enhanced precipitation strengthening of multi-principal element alloys by κ- and B2-phases

Effects of Al and Ti co-doping on the strength-ductility- corrosion resistance of CoCrFeNi-AlTi high-entropy alloys

Machine-learning assisted design of as-cast NiCoFeCrAlTi multi-principal element alloys with tensile yield strength over 1.35 GPa

Fabrication of MnCuNiFe–CuAlNiFeMn Gradient Alloy by Laser Engineering Net Shaping System

A promising new class of multi-component alloys with exceptional mechanical properties

Superior strength-ductility synergy of an oxide-dispersion strengthened CoCrNi-based multi-principal element alloy

Strength-ductility Synergy and Superior Strain-Hardening Ability of Ni38Co25Fe13Cr10Al7Ti7 Multi Principal Element Alloy Through Heterogeneous L12 Structure Modulation

Achieving ultra-strong and ductile CoNi-based FCC multi-principal element alloys via alloying with refractory Mo and W

A Novel Martensitic-Like Transformation Fe-Based Multi-principal Element Alloy