Abstract:To regulate multiple strengthening behaviors of as-cast high entropy alloys (HEAs) with a single phase face centered cubic (FCC) structure, the Mo element has been alloyed to the non-equiatomic CoCrFeNi HEA. Co30Cr30(FeNi)(40-x)Mo-x (x = 0, 2, 4, 6, 8, and 10 at%, hereinafter, simplified as HMo0, HMo2, HMo4, HMo6, HMo8, and HMo10, respectively) HEAs were prepared. The microstructure, tensile properties, and deformation behavior of as-cast alloys were investigated. The results show that the phase composition of HMo0-HMo4 is a single phase solid solution. The microstructure transforms from single phase FCC to FCC and & USigma; dual phases when Mo content is more than 4 at%. The morphology of sigma phase changes from a dispersed rod-like structure to a network structure. Md value is utilized to predict the formation of sigma phase. Mo elements with large atomic size cause severe lattice distortion and reduce stacking fault energy (SFE) in the FCC matrix phase. The yield strength increases gradually from 227 MPa to 688 MPa with the increase of Mo content. HMo4 has high strain hardening ability to realize the synergy of tensile strength and plasticity of 689 MPa and 102.43%. HMo6 has high yield strength (486 MPa) and tensile strength (770 MPa), but without causing serious embrittlement (43.91%). The improvement of yield strength is attributed to solid solution strengthening and precipitated strengthening. The twins and SFs are activated due to the low SFE in HMo4. The dislocation movement is further hindered and the dislocation mean-free path is reduced due to the increase of twin boundary, which contributes to high strain hardening ability. For dual-phase alloy, the dispersed hard sigma phase effectively impedes dislocation movement, causing stress concentration and crack initiation within the sigma phase. The crack propagation is passivated in the soft FCC matrix to maintain a certain plasticity. Excessive network sigma phases damage plasticity. (C) 2022 Published by Elsevier B.V.

Achieving ultra-strong and ductile CoNi-based FCC multi-principal element alloys via alloying with refractory Mo and W

Composition Design Study of Strong and Ductile Mo-alloyed CoCrNi Medium-Entropy Alloys

Superior strength-ductility synergy of an oxide-dispersion strengthened CoCrNi-based multi-principal element alloy

Unveiling the Precipitation Behavior and Mechanical Properties in G-phase Strengthened CrFe2Ni2Ti0.2Six Multi-Principal Element Alloys

Inherent and Multiple Strain Hardening Imparting Synergistic Ultrahigh Strength and Ductility in a Low Stacking Faulted Heterogeneous High-Entropy Alloy

Effects of Fe on microstructure and mechanical properties of CoCrNiFeAl multi-principle elements alloys

Effective combination of solid solution strengthening and precipitation hardening in NiCrFeWTiAl multi-principal element alloys

Alloying behavior of W and Mo in the as-cast dual-phase FeNiCrAl multi-component alloys

A Novel Martensitic-Like Transformation Fe-Based Multi-principal Element Alloy

Precipitation Phase and Twins Strengthening Behaviors of As-Cast Non-Equiatomic CoCrFeNiMo High Entropy Alloys

Strengthening FCC-CoCrFeMnNi High Entropy Alloys by Mo Addition

Enhancing Strength and Ductility of a Ni-26.6Co-18.4Cr-4.1Mo-2.3Al-0.3Ti-5.4Nb Alloy via Nanosized Precipitations, Stacking Faults, and Nanotwins

Improving Mechanical Properties of Co-Cr-Fe-Ni High Entropy Alloy via C and Mo Microalloying

A Novel Metastable FCC High Entropy Alloy with Excellent As-Cast Strength-Ductility Synergy by Utilizing Heterogeneous Structure and Twinning-Induced Plasticity

Excellent Strength-Ductility Synergy Assisted by Dislocation Dipole-Induced Plasticity in Co-free Precipitate-Strengthened Medium-Entropy Alloy

Tuning the Mechanical Properties of Fex(CoMoNi)100-x High-Entropy Alloys Via Controlled Formation of Hard Μ Phase

Achieving Excellent Strength-Ductility Balance in Single-Phase CoCrNiV Multi-Principal Element Alloy

Microstructures and mechanical properties of FeCoNi(MoW) high-entropy alloys

Deciphering the effect of W and Mo co-additions on recrystallization behavior and strengthening mechanism of CrCoNi medium entropy alloy

Achieving an excellent combination of strength and ductility in a single-phase metastable medium-entropy alloy

Diffusion-controlled Alloying of Single-phase Multi-principal Covalent Transition Metal Carbides with Enhanced Damage tolerance and Exceptional Thermal Properties