Abstract:Evaluation of the concrete cracking induced by rebar corrosion is necessary for accurately clarifying the durability and predicting the service life of reinforced concrete (RC) structures. The fact that rust penetration into cracks might decrease corrosion expansion has been realized but not sufficiently investigated. In this paper, a numerical approach in terms of the mesoscopic structure of concrete is used to simulate the corrosion-induced concrete cracking, and the lattice network model to account for rust penetration into cracks is developed by assuming that the movement of rust is driven by moisture convection. The total rust amount is calculated based on Faraday's law, and the rust expansion is transformed to a radial displacement boundary condition for both uniform and nonuniform conditions. Rust penetration is assumed to be a convection process governed by Darcy's law. The proposed model is confirmed by comparing cracking pattern, corrosion pressure, surface crack width, mass ratio of penetrated rust to total rust (Delta W-pe/Delta W-total), and volume ratio of cracks occupied by rust to total cracks (Vrustcrack/Vcracktotal) with available experimental and numerical results. It is found that the distribution and the amount of penetrated rust are closely related to the volume of cracks and the connection of crack networks. Besides, through sensitivity analysis of influencing factors for rust penetration, it is found that a higher dissolved degree of rust in moisture induces a higher Delta W-pe/Delta W-total, but it doesn't influence Vrustcrack/Vcracktotal. A larger relative water content at the concrete-steel interface will induce higher Delta W-pe/Delta W-total and Vrustcrack/Vcracktotal, while the initial relative water content in concrete has no significant difference on either Delta W-pe/Delta W-total or Vrustcrack/Vcracktotal. (C) 2021 American Society of Civil Engineers.

Numerical Simulation of Corrosion-Induced Cracking of Concrete Considering Rust Penetration into Cracks

State-of-art of corrosion-induced cracking of reinforced concrete structures

Developing a Three-Dimensional Finite Element Analysis Approach to Simulate Corrosion-Induced Concrete Cracking in Reinforced Concrete Beams

Corrosion-Induced Cracking Propagation Of Rc Beams Subjected To Different Corrosion Methods And Load Levels

Study On Modulus Of Rust Applied In Steel Corrosion Induced Concrete Cracking Model

Cover Cracking Model in Reinforced Concrete Structures Subject to Rebar Corrosion

Crack shape and rust distribution in corrosion-induced cracking concrete

Experimental Investigation of Corrosion-Induced Cover Cracking in Reinforced Concrete Structures

Crack shape and rust distribution in corrosion-induced cracking concrete coupled with load

Prediction of Corrosion-Induced Crack Width of Corroded Reinforced Concrete Structures

Modelling the corrosion mechanism of steel bars in chloride-contaminated concrete with transverse cracks

Modeling the Amount of Steel Corrosion at the Cracking of Concrete Cover

Behavior Of Rust Expansion Cracking Of Concrete Deduced By Equivalent Corrosion Products Of Steel Bar

Damage Analysis and Cracking Model of Reinforced Concrete Structures with Rebar Corrosion

Numerical Model for Corrosion Rate of Steel Reinforcement in Cracked Reinforced Concrete Structure

Corrosion-induced Shear Performance Degradation of Reinforced Concrete Beams

Corrosion-induced concrete cracking model considering corrosion product-filled paste at the concrete/steel interface

Numerical Simulation of Steel Corrosion in Chloride Contaminated Concrete

Numerical-based method for calculating reinforcement corrosion at concrete cover cracking due to corrosion

Modeling of Time to Corrosion-Induced Cover Cracking in Reinforced Concrete Structures

Corrosion-Induced Concrete Cracking Model Considering Corrosion-Filled Paste