Abstract:This study investigates the efficiencies and mechanisms of the catalytic degradation of polychlorinated dibenzo-p-dioxins and furans (PCDD/Fs) first, in simulated laboratory conditions and then, in a commercial municipal solid waste incineration (MSWI) plant. Five commercially available V2O5-WO3/TiO2 (VWTi) catalysts were tested. The degradation efficiency of PCDD/Fs in the simulated flue gas ranged 22.8-91.7% and was generally higher than that in the MSWI flue gas of 8.0-85.4%. The degradation efficiency of PCDD/Fs in the real flue gas of the MSWI plant was largely hindered by the complex composition of the flue gas, which could not be completely reproduced in the simulated laboratory conditions. Furthermore, the degradation of the higher chlorinated PCDD/Fs was easier compared to the lower chlorinated ones in the presence of the VWTi catalysts, which was primarily driven by the tendency of the higher chlorinated PCDD/Fs to be adsorbed on the surface of the catalyst and further destructed due to their lower vapor pressure. In addition, powdered catalysts should be preferred over the honeycomb shaped ones as they exposed higher PCDD/Fs degradation efficiencies under equal reaction conditions. The chemical composition and a range of the relevant to the study properties of the catalysts, such as surface area, crystallinity, oxidation ability, and surface acidity, were analyzed. The study ultimately supports the identification of the preferred characteristics of the VWTi catalysts for the most efficient degradation of toxic PCDD/Fs and elucidates the corresponding deactivation reasons of the catalysts.

Whole Life Cycle Performance Evolution of Selective Catalytic Reduction Catalyst in Coal-Fired Power Plants

Investigation of Arsenic Poisoned Selective Catalytic Reduction Catalyst Performance and Lifetime in Coal-Fired Power Plants

Performance Evaluation and Life Management of SCR Denitration Catalyst

A comprehensive review of deactivation and modification of selective catalytic reaction catalysts installed in cement kilns

Deactivation and Regeneration of Commercial SCR Catalysts Used in a 660 MW Coal-Fired Power Plant

Performance of transition metal (Cu, Fe and Co) modified SCR catalysts for simultaneous removal of NO and volatile organic compounds (VOCs) from coal-fired power plant flue gas

Chemical deactivation of Selective Catalytic Reduction catalyst: Investigating the influence and mechanism of SeO<sub>2</sub> poisoning

Coordinated Optimization Control of Flue Gas Temperature for Improving Reaction Efficiency of Catalyst

Catalytic Destruction of A Surrogate Organic Hazardous Air Pollutant As A Potential Co-Benefit for Coal-Fired Selective Catalytic Reduction Systems

Comparative Analyses of Catalytic Degradation of PCDD/Fs in the Laboratory Vs. Industrial Conditions

Deactivation of commercial SCR catalyst used in 1000MW coal-fired power plant

In Situ Treatment by High-Temperature Water Vapor As a Novel Health-Care Approach for Commercial SCR Catalyst

Comparative analyses of catalytic degradation of PCDD/Fs in the laboratory vs. industrial conditions.

Design and Operational Considerations for Selective Catalytic Reduction Technologies at Coal-Fired Boilers

Evolution of Surface Structure on Pd–Cl/Alumina Catalyst During CO Purification Process

Deactivation Mechanism of Multipoisons in Cement Furnace Flue Gas on Selective Catalytic Reduction Catalysts

Progress in Catalytic Oxidation Technology for Element Mercury in Coal-fired Flue Gas

In Situ Regeneration of Commercial NH3-SCR Catalysts with High-Temperature Water Vapor

Performance of V2o5-Wo3-Moo3/Tio2 Catalyst for Selective Catalytic Reduction of Nox by Nh3

Integrated technology for dust removal and denitration of high-temperature flue gas in coal-fired power plants

Coated monolithic catalysts for better selective catalytic reduction: Concerns about structural integrity, catalytic activity and anti-poisoning performance