Abstract:Water vapor in a sealed glass container processed by lyophilization is a main factor for drug metamorphism. The key to knowing whether there is a leakage occurring in the container is how to detect water concentration and pressure in the sealed container quickly and accurately. In the present paper, a strong absorption line of H2O near 1.39 mu m is carefully selected to avoid the interference of neighboring transitions. A distributed feedback laser semiconductor laser near 1.396 mu m is employed as the light source with a power of 10 mW and typical linewidth of 2 MHz by combining with tunable diode laser absorption spectroscopy technique, the concentrations and pressures of water vapor in the sealed container are successfully detected under static condition and dynamic condition. In order to isolate the interference absorption from the ambient water vapor in the air, a differential absorption technique is employed in our experiment, which makes our system simpler than routine nitrogen purging based system. During the measurement, the second harmonic signal is utilized for measuring the concentration and pressure, the concentration is retrieved by the peak value while the pressure is calculated by the full width at half maximum. For the measurement of concentration ranging from 0.2% to 12%, the linear correlation coefficient between the real values and the inversed values and the standard deviation ratio are 0.9978 and 4.81%, respectively. For the measurement of pressure, the correlation coefficient and standard deviation ratio are 0.982 and 5.6%, respectively. The minimum detection limits of the concentration and pressure are 400 ppm and 2.5 Torr, respectively. Moreover, in order to test the system for on-line applications in the pharmaceutical industry, measurements are performed in vials which are placed on a rotary stage to simulate the process of the assemble line. In particular, the amplitude of sinuous signal without absorption is used as the reference signal to validate whether the vial is in the optical path. Besides, this amplitude is also utilized to normalize the laser power. The results show that our system can handle about 300 bottles in one minute, which can meet well the requirements for rapid and real-time detections. This system can be applied directly to the medicine bottle on-line detection, and multicomponent detection can also be realized by employing two or more lasers (e.g. H2O, oxygen, etc.). In the future, we plan to build a system for detecting water vapor and oxygen simultaneously, as oxygen is another import indicator for drug metamorphism.

A Predictive Instrument for Sensitive and Expedited Measurement of Ultra-Barrier Permeation

Measurement of Reactive and Condensable Gas Permeation Using a Mass Spectrometer

Calibration of a QMS System for High-Sensitivity Gas Permeation Measurement

Novel optical and electrical combined calcium corrosion test: An industrial application of the barrier permeability of spotless water vapor

A Novel Vapor Dynamic Headspace Enrichment Equipment For Nontarget Screening Of Volatile Organic Compounds In Drinking Water

Background noise analysis and improvement for the water vapor and oxygen transmission rate test of free-standing films

Empirical Model and PSO-Based Algorithm for Efficient Measurement of Gas Permeation Through High Barrier

Simulating the Permeation of Toxic Chemicals through Barrier Materials

A coating-free superhydrophobic sensing material for full-range human motion and microliter droplet impact detection

Designed Multifunctional Sensor to Monitor Resin Permeation and Thickness Variation in Liquid Composite Molding Process

Study on the Method for Testing the Water Vapor Diffusion Resistance of Membranes

Sensitive Organic Vapor Sensors Based on Flexible Porous Conductive Composites with Multilevel Pores and Thin, Rough, Hollow-Wall Structure

Concentration and pressure measurement of water vapor in sealed glass containers based on tunable diode laser absorption spectroscopy

A novel method measuring orifice conductance and testing time-of-flight mass spectrometer for water vapor-binary gas

A sandwich temperature control membrane inlet mass spectrometer for dissolved gases and volatile organic compounds in aqueous solution

Removing Water Vapor Interference In Peroxy Radical Chemical Amplification With A Large Diameter Nafion Dryer

Ultrasensitive and flexible humidity sensors fabricated by ion beam sputtering and deposition from polydimethylsiloxane

Measurement methods in trace water vapor concentration detection system based on direct absorption spectroscopy

A Novel Method for Determining Water Saturation of Porous Media in Relative Permeability Measurement Using DPT

Interfacially Fabricated Covalent Organic Framework Membranes for Film‐based Fluorescence Humidity Sensors and Moisture Driven Actuators

Water Vapor Detecting Using High-Q Microcavity