Abstract:USP <1207.1> Section 3.5 states that "A deterministic leak test method having the ability to detect leaks at the product's maximum allowable leakage limit is preferred when establishing the inherent integrity of a container-closure system." Ideally, container closure integrity of parenteral packaging would be evaluated by measuring a physical property that is sensitive to the presence of any package defect that breaches package integrity by increasing its leakage above its maximum allowable leakage limit. The primary goals of the work presented herein were to demonstrate the viability of the nondestructive, deterministic method known as laser-based gas headspace analysis for evaluating container closure integrity and to provide a physical model for predicting leak rates for a variety of container volumes, headspace conditions, and defect sizes. The results demonstrate that laser-based headspace analysis provides sensitive, accurate, and reproducible measurements of the gas ingress into glass vial-stopper package assemblies that are under either diffusive or effusive leak conditions. Two different types of positive controls were examined. First, laser-drilled micro-holes in thin metal disks that were crimped on top of 15R glass vials served as positive controls with a well-characterized defect geometry. For these, a strong correlation was observed between the measured ingress parameter and the size of the defect for both diffusive and effusive conditions. Second, laser-drilled holes in the wall of glass vials served as controls that more closely simulate real-world defects. Due to their complex defect geometries, their diffusive and effusive ingress parameters did not necessarily correlate; this is an important observation that has significant implications for standardizing the characterization of container defects. Regardless, laser-based headspace analysis could readily differentiate positive and negative controls for all leak conditions, and the results provide a guide for method development of container closure integrity tests.LAY ABSTRACT: The new USP 39 <1207>, "Package Integrity Evaluation-Sterile Products", states in section 3.4.1: "tracer gas tests performed using … laser-based gas headspace analysis [have] been shown to be sensitive enough to quantitatively analyze leakage through the smallest leak paths found to pose the smallest chance of liquid leakage or microbial ingress in rigid packaging." In addition, USP <1207> also states that "for such methods, the limit of detection can be mathematically predicted on the basis of gas flow kinetics." Using the above statements as a foundation, this paper presents a theoretical basis for predicting the gas ingress through well-defined defects in product vials sealed under a variety of headspace conditions. These calculated predictions were experimentally validated by comparing them to measurements of changes in the headspace oxygen content or total pressure for several different positive controls using laser-based headspace analysis. The results demonstrated that laser-based headspace analysis can, by readily differentiating between negative controls and positive controls with a range of defect sizes on the micron scale, be used to assess container closure integrity. The work also demontrated that caution must be used when attempting to correlate a leak rate to an idealized defect-size parameter.

Background noise analysis and improvement for the water vapor and oxygen transmission rate test of free-standing films

Novel optical and electrical combined calcium corrosion test: An industrial application of the barrier permeability of spotless water vapor

Testbed Hardware Design to Collect Data for Underground PVC Water Pipe Crack Detection: Challenges and Solutions

Measurement of Reactive and Condensable Gas Permeation Using a Mass Spectrometer

Study on the Method for Testing the Water Vapor Diffusion Resistance of Membranes

A New Apparatus for Investigating Gas Transport Property in Geomaterials with Ultralow Permeability

A Predictive Instrument for Sensitive and Expedited Measurement of Ultra-Barrier Permeation

A novel paper-based composite film with enhanced oxygen and water vapor barrier properties

A Robust Data Processing Method for Pulse-Decay Measurement of Tight Materials

A Temperature-Controlled Apparatus for Gas Permeability under Low Gas Pressure

A measuring method for B10 corrosion product film thickness and corrosion damage based on white light interferometer

Calibration of a QMS System for High-Sensitivity Gas Permeation Measurement

Improved Method for Measuring the Permeability of Nanoporous Material and Its Application to Shale Matrix with Ultra-Low Permeability.

Method Development for Container Closure Integrity Evaluation via Headspace Gas Ingress by Using Frequency Modulation Spectroscopy

Optical monitoring of water side permeation in thin film encapsulation

Examination of Stability of Boundary Conditions in Water Vapor Transmission Tests

The Relationship Between Water Transmission Rate and Defects on the Film Based on the Defect Analysis Using Fluorescent Calcein Probe

Assessing the suitability of new film laminates for sustainable insect eradication by modified atmosphere in museums

INVERSE ANALYSIS TO OBTAIN THE PRESSURE-DEPENDENT PERMEABILITY OF MICRO/NANO POROUS MATERIALS

Automated optical liquid film thickness measurement method

Non-contact optical characterization of negative pressure in hydrogel voids and microchannels