Abstract:To improve the high-temperature ablation resistance of Nb alloys, multiphase-multilayer ceramic coatings were prepared using a novel strategy combining halide activated pack cementation (HAPC) and liquid plasma-assisted particle deposition and sintering (LPDS) methods. The MoSi2, Yb2O3, and ZrC particles were deposited individually or co-deposited on the NbSi2 bottom layer to obtain NbSi2/SiO2-Nb2O5/MoSi2 (Mo), NbSi2/SiO2-Nb2O5/MoSi2-Yb2O3-SiO2 (MoYb), NbSi2/SiO2-Nb2O5/MoSi2-Yb2O3-ZrO2-ZrC (MoYbZr) multilayer ceramic coatings, respectively. Results showed that all three coatings remained intact after propane ablation (1500 degrees C), exhibiting excellent ablation resistance. For the harsher oxyacetylene ablation environments with higher temperatures (1800 degrees C), Mo coating suffered from long cracks, bubbling, and localized spalling and MoYb coating sprouted massive cracks without spalling. The oxide scale integrity of the MoYbZr coating was well maintained without cracks, exhibiting excellent resistance to oxyacetylene ablation attributed to the incorporation of Yb2O3 and ZrC. The mass and linear ablation rates of MoYbZr coating were only 0.137 mg/s and 0.196 mu m/s after oxyacetylene ablation, which were 25.14 % and 49.61 % lower than that of MoYb coating, and 88.01 % and 75.37 % lower than that of the Mo coating, respectively. The Yb2O3 strengthened the Si-O bonding in the SiO2 network and increased the viscosity of the SiO2 scale, thus enhancing the self-healing ability of the oxide scale and slowing down the evaporation of SiO2. The oxidation products (ZrO2 with SiO2) from MoSi2 and ZrC further reacted to produce ZrSiO4, which can inhibit microcrack creation and extension. Micropores in the Zr-Si-O oxide scale mitigated thermal stresses, inhibited crack initiation and extension. The Yb2O3, Yb2SiO5, and ZrSiO4 embedded in the SiO2-ZrO2 scale acted as pinning effects, enhancing the high-temperature structural stability, thereby improving the ablation resistance of the MoYbZr coatings.

High-temperature Phase Composition, Crystal Stabilisation, and Interfacial Diffusion of (Nbc-Zrc)/sic Double-Layer Coated C/C Composites Enduring the Oxyacetylene Flame

Multi-cycle and long-term ablation behavior of Cf/ZrB2-SiC composites at 2500 °C

Phase and microstructure evolutions of in-situ ZrC composite coating under plasma torch ablation

Microstructural Evolution and Ablation Behaviors of NbSi2/SiO2–Nb2O5/X (x=mosi2, MoSi2-Yb2O3, MoSi2-Yb2O3–ZrC) Multilayer Coatings on Nb Alloy in Different Ablation Environments

Ablation behaviour of the CVD-(ZrC/SiC)3 alternate coating on C/C composites under oxyacetylene torch with different heat fluxes

Ablation behavior of C/C–Zr1-xHfxC-SiC composites under an oxyacetylene flame at above 2500 °C

Microstructure Evolution and Oxidation/ablation Behaviors of NbSi2/Nb2O5-SiO2/HfC-HfO2 Multilayer Protective Coating at 1200 °C and 1800 °C

High Temperature Oxidation and Oxyacetylene Ablation Properties of ZrB2-ZrC-SiC Ultra-High Temperature Composite Ceramic Coatings Deposited on C/C Composites by Laser Cladding

Long-term and cyclic ablation behavior of La2O3 modified Cf/ZrB2-SiC composites at 2500 °C

Structural and Phase Transformations in Plasma-Spray ZrB2–SiC–AlN Coatings on a C/C–SiC Substrate After High-Temperature Thermal Cyclic Heating

Ablation behavior and mechanisms of Cf/(CrZrHfNbTa)C‒SiC high‐entropy composite at temperatures up to 2450°C

Ablation behavior and mechanisms of ZrC-SiC-MoSi2 coated C/C-SiC-ZrC ceramic matrix composites under oxyacetylene torch

Microstructure evolution and oxidation/ablation behaviors of NbSi2/Nb2O5-SiO2/HfC-HfO2 multilayer protective coating at 1200 °C and 1800 °C

Ablation-resistance of ZrB2-SiC Coating under Oxygen-propane Torch Flame Prepared by Atmospheric Plasma Spraying

Ablation Behavior and Mechanism of Double-Layer ZrB2-based Ceramic Coating for Lightweight Carbon-Bonded Carbon Fiber Composites under Oxyacetylene Flame at Elevate Temperature

Microstructure and Ablation Performance of SiC–ZrC Coated C/C Composites Prepared by Reactive Melt Infiltration

Ablation properties and mechanisms of BN-coated Cf-reinforced SiBCNZr ceramic composites under an oxyacetylene combustion torch

A novel Hf0.75Zr0.25N solid solution coating with high mechanical strength: Ablation protection application above 2200°C

Ablation Resistance of ZrC-based Composite Coating with Multi-Layer Structure for Carbon/carbon Composites above 2200 °C

Effect of temperature-dependent nano SiC on the ablation resistance of ZrC coating

Microstructure and Ablation Behavior of W/ZrC/SiC Coating on C/C Composites Prepared by Reactive Melt Infiltration and Atmospheric Plasma Spraying