Abstract:The construction of heterojunction between NIR photoelectric materials and other types of materials has the potential to improve the performance of VIS-NIR photoelectric materials and broaden the absorption spectrum. In this study, the properties and theoretical calculations are carried out using the near-infrared photoelectric material PbS and the perovskite material CsPbX 3 (X = Cl, Br, I) to build heterostructures. The appropriate lattice mismatch rates (4.5 %, 2 % and 4.6 %) between PbS and CsPbX 3 (X = Cl, Br, I) ensure the feasibility of constructing PbS/CsPbX 3 (X = Cl, Br, I) heterogeneous structures. The electronic properties calculations revealed physical mechanisms that improve luminous efficiency. Notably, the I-type band alignment (-5.02eV < PbS < −3.77eV, −5.85eV < CsPbX 3 (X = Cl, Br, I) < -3.35eV) at the PbS/CsPbX 3 (X = Cl, Br, I) interface facilitates efficient electron and hole transfer from the CsPbX 3 (X = Cl, Br, I) quantum dots to the PbS material, which was further validated by the observed difference in charge density. Among them, the electron cloud of PbS/CsPbCl 3 heterostructure is more obvious, and the charge transfer ability is better than that of the other two heterostructures. The heterostructures extend the light absorption range of CsPbX 3 (X = Cl, Br, I) from visible to near-infrared under the influence of PbS. By comparing the light absorption functions, it is found that PbS/CsPbI 3 > PbS/CsPbCl 3 > PbS/CsPbBr 3 in this range. Regarding comprehensive stability, charge density transfer, and optical properties, PbS/CsPbCl 3 has the best performance. Under the premise of ensuring stability, different light absorption characteristics can be achieved by adjusting the composition of halogen atoms in PbS/CsPbCl 3 . This study provides a theoretical basis for enhancing the performance of the PbS/CsPbX3 (X = Cl, Br, I) heterostructures in VIS-NIR optoelectronic materials through investigations of their electronic and optical properties. It yields a promising approach for the design of high-performance VIS-NIR heterogeneous materials.

CsPbX3-ITO (X = Cl, Br, I) Nano-Heterojunctions: Voltage Tuned Positive to Negative Photoresponse

High-performance CsPbBr3-xClx/Si Heterojunction Photodetectors for Variable Wavelength Photodetection

Hybrid Field-Effect Transistors and Photodetectors Based on Organic Semiconductor and CsPbI3 Perovskite Nanorods Bilayer Structure

Hetero-integrated MoS 2 /CsPbBr 3 photodetector with enhanced performance via combinational modulation of grain boundary passivation and interfacial carrier separation

Halide-modulated (Cs,NH4)Pb(Br,X)3 (X = Cl, Br, I) perovskite nanocrystals with tunable emissions via cation/anion co-exchanging strategy

Heterostructural CsPbX3-PbS (X = Cl, Br, I) Quantum Dots with Tunable Vis-NIR Dual Emission.

Wavelength-dependent negative/positive photoresponses in single-walled carbon nanotube/PbS quantum dot mixed-dimensional heterostructures

Enhanced Stability and Tunable Photoluminescence in Perovskite CsPbX3 /ZnS Quantum Dot Heterostructure

Performance‐Enhanced CsPbBr 3 /HfO 2 /Si Heterostructure Optoelectronics through the Tunneling Effect

Engineering the Exciton Dissociation in Quantum‐Confined 2D CsPbBr3 Nanosheet Films

Tunable Emissive CsPbBr3/Cs4PbBr6 Quantum Dots Engineered by Discrete Phase Transformation for Enhanced Photogating in Field‐Effect Phototransistors

Positive and negative photoconductivity characteristics in CsPbBr 3 /graphene heterojunction

Control of positive and negative photo- and thermal-responses in a single PbI2@CH3NH3PbI3 micro/nanowire-based device for real-time sensing, nonvolatile memory, and logic operation

High-Performance CsPbBr3-Silicon Heterojunction Photodetectors Fabricated by Chemical Vapor Deposition

Exceptional PbS/CsPbCl 3 heterostructure based on the structural, electronic and optical properties of PbS/CsPbX 3 (X=Cl, Br, I)

Photoresponsive characteristics of thin film transistors with perovskite quantum dots embedded amorphous InGaZnO channels*

Exceptional PbS/CsPbCl3 heterostructure based on the structural, electronic and optical properties of PbS/CsPbX3(X=Cl, Br, I)

High responsivity photodetector based on MEH-PPV/CsPbBr3heterojunction

Highly Controllable and Efficient Synthesis of Mixed-Halide CsPbX3 (X = Cl, Br, I) Perovskite QDs toward the Tunability of Entire Visible Light

All‐Inorganic CsPbBr 3 Perovskite Nanocrystals/2D Non‐Layered Cadmium Sulfide Selenide for High‐Performance Photodetectors by Energy Band Alignment Engineering

Characterization and investigation of intermediate stages during anion-exchange reaction between CsPbBr3 and CsPbI3 nanocrystal solution and film via photoluminescence and electroluminescence spectroscopy