Abstract:These complexes provided stress relief and bridging effects during deformation, thereby increasing ductability without affecting modulus and strength. The presence of core‐shell nanoparticles and long‐chain branching, and the subsequent formation of a network structure, will impede the movement of small gas molecules, improving gas barrier properties. Incorporating inorganic particles is a common approach to preparing polymeric materials with desirable physical properties and processability. However, this often results in increased brittleness, necessitating methods to improve melt strength and toughness. In this study, in situ polymerization was employed to functionalize silica nanoparticles with the silane coupling agent (3‐aminopropyl) triethoxysilane (APTES) as a core. A flexible chain segment, poly(butylene itaconate) (PBI), was then introduced as a "rubbery" intermediate layer, resulting in a core‐shell structure of poly(L‐lactic‐co‐butanediol itaconate) nano‐silica copolymer films (PLBISiO2) with both branched and "rubbery" structures. Fourier transform infrared spectroscopy (FTIR) and nuclear magnetic resonance (NMR) confirmed the formation of macromolecular chains, with the molecular weight (Mn) of PLBI increasing from 59,638 to 74,306 g/mol. This significant increase supports the "rubbery" core‐shell structure. When 0.5% SiO2 was added, the T5% of the film increased by 40°C, significantly improving thermal stability. Additionally, the elongation at break increased to 265.7%, while retaining the original tensile strength. Dynamic rheology experiments further confirmed the generation of branched or "rubbery" core‐shell structures, and a doubling of gas barrier properties was observed with increased silica nanoparticles, suggesting potential applications in food packaging or biopharmaceuticals. Highlights Nanocomposites with core‐shell structure and improved mechanical properties. Dynamic rheology experiments confirmed the formation of the core‐shell structure. Significantly improved gas barrier properties due to core‐shell structure.

Polymer-Grafted Porous Silica Nanoparticles With Enhanced Co2 Permeability And Mechanical Performance

Polymer-Grafted Porous Silica Nanoparticles with Enhanced CO 2 Permeability and Mechanical Performance

Nanostructured Poly(l-Lactic Acid)-Poly(ethylene Glycol)-Poly(l-lactic Acid) Triblock Copolymers and Their CO2/O-2 Permselectivity

Synthesis of Poly(ionic Liquid)s-<i>block</i>-poly(methyl Methacrylate) Copolymer-Grafted Silica Particle Brushes with Enhanced CO<sub>2</sub> Permeability and Mechanical Performance

Synthesis of Poly(ionic Liquid)s- block -poly(methyl Methacrylate) Copolymer-Grafted Silica Particle Brushes with Enhanced CO 2 Permeability and Mechanical Performance

Preparation and characterization of crystalline poly(L‐lactic acid)/silica nanocomposite films with high ductility and gas barrier properties

Mesoporous Silica-Reinforced Polymer Nanocomposites

Improving gas permeation performance of PDMS by incorporating hollow polyimide nanoparticles with microporous shells and preparing defect-free composite membranes for gas separation

Polymethacrylate-Silica Hybrid Nanoporous Materials: A Bridge Between Inorganic and Polymeric Molecular Sieves

PDMS‐silica composite gas separation membranes by direct ink writing

Nanocomposite Membranes for CO2 Separations: Silica/Brominated Poly(phenylene Oxide)

The lamellar MOFs @polymer networks hybrids fabricated in reversed microemulsion for efficient CO 2 capture

Enhanced Properties of Poly(lactic Acid) with Silica Nanoparticles

High-Pressure CO2 Sorption in Polymers of Intrinsic Microporosity under Ultrathin Film Confinement

Ultrapermeable membranes based on connected cluster of hollow polydimethylsiloxane nanoparticles for gas separation

Fabrication, Facilitating Gas Permeability, and Molecular Simulations of Porous Hypercrosslinked Polymers Embedding 6FDA-Based Polyimide Mixed-Matrix Membranes

Highly Permeable Mixed Matrix Materials Comprising ZIF-8 Nanoparticles in Rubbery Amorphous Poly(ethylene Oxide) for CO2 Capture

Supported Ionic Liquid Membrane with Highly-permeable Polyamide Armor by In Situ Interfacial Polymerization for Durable CO2 Separation

Poly(ionic liquid)-Functionalized UiO-66-(OH)2: Improved Interfacial Compatibility and Separation Ability in Mixed Matrix Membranes for CO2 Separation

Reinforcement of single-walled carbon nanotubes on polydimethylsiloxane membranes for CO2, O2, and N2 permeability/selectivity

Exploring the confinement of polymer nanolayers into ordered mesoporous silica using advanced gas physisorption