Abstract:Nowadays, companies and researchers are concerned about the negative consequences of using synthetic polymers and direct their efforts to create new alternatives such as biocomposites. This study investigated the effect of biobased SiO2 on the properties of poly(L-lactic acid)/SiO2 (PLLA/SiO2) and poly(L-lactic acid)/SiO2/poly(ethylene glycol) (PLLA/SiO2/PEG) composites. The SiO2 was obtained from rice husk incineration and mixed with PLLA at various concentrations (5, 10, and 15 wt.%) via melt extrusion before compression molding. Furthermore, PLLA/SiO2/PEG composites with various PEG concentrations (0, 3, 5, and 10 wt.%) with 10 wt.% SiO2 were produced. The sample morphology was studied by scanning electron microscopy (SEM) to analyze the dispersion/adhesion of SiO2 in the polymer matrix and differential scanning calorimetry (DSC) was used under isothermal and non-isothermal conditions to study the thermal properties of the samples, which was complemented by thermal stability study using thermogravimetric analysis (TGA). Rheological analysis was performed to investigate the viscoelastic behavior of the composites in the melt state. At the same time, tensile mechanical properties were obtained at room temperature to determine their properties in the solid state. DSC and X-ray diffraction analysis (XRD) were combined to determine the crystalline state of the samples. Finally, gas permeation measurements were performed using a variable pressure (constant volume) method to analyze the permeability of different gases (CO2, CH4, O2, and H2). The results showed that SiO2 decreased the PLLA chain mobility, slowing the crystallization process and lowering the gas permeability while increasing Young’s modulus, thermal stability, and viscosity. However, PEG addition increased the crystallization rate compared to the neat PLLA (+40%), and its elongation at break (+26%), leading to more flexible/ductile samples. Due to improved silica dispersion and PLLA chain mobility, the material’s viscosity and gas permeability (+50%) were also improved with PEG addition. This research uses material considered as waste to improve the properties of PLA, obtaining a material with the potential to be used for packaging.

Nanostructured Poly(l-Lactic Acid)-Poly(ethylene Glycol)-Poly(l-lactic Acid) Triblock Copolymers and Their CO2/O-2 Permselectivity

Amphiphilic Block Copolymers Based on Methoxy Poly(ethylene Glycol) and Either Crystalline or Amorphous Poly(caprolactone‐b‐lactide): Synthesis, Solid‐state and Aqueous Solution Characterizations

Modulating Drug Release from Short Poly(ethylene Glycol) Block Initiated Poly(L-lactide) Di-block Copolymers

Biodegradable comb-dendritic tri-block copolymers consisting of poly(ethylene glycol) and poly(l-lactide): Synthesis, characterizations, and regulation of surface morphology and cell responses

Short Poly(ethylene Glycol) Block Initiation of Poly(l‐lactide) Di‐block Copolymers: a Strategy for Tuning the Degradation of Resorbable Devices

Preparation And Properties Of Polylactide/Poly(Ethylene-Co-Octene)/Nano-Sio2 Ternary Composites

Biodegradable and Biocompatible P(Dl)La-Peg(1k)-P(Dl)La Diacrylate Macromers: Synthesis, Characterisation and Preparation of Soluble Hyperbranched Polymers and Crosslinked Hydrogels

Synthesis and Gelation Properties of PEG-PLA-PEG Triblock Copolymers Obtained by Coupling Monohydroxylated PEG-PLA with Adipoyl Chloride.

Morphology, rheology, and mechanical properties of polylactide/ poly(ethylene-co-octene) blends

Synthesis and Drug Controlled Release of Block Copolymers of Poly(l‐lactide) with Poly(d, L‐lactide) and Related Monomers

Dialdehyde Polyethylene Glycol Cross‐linked Poly(vinyl Alcohol) Membranes with Enhanced CO2/N2 Separation Performance

Synthesis and Characterization of Degradable Triarm Low Unsaturated Poly(propylene Oxide)‐block‐polylactide Copolymers

Highly Polar but Amorphous Polymers with Robust Membrane CO2/N2 Separation Performance

Effect of Biobased SiO2 on the Morphological, Thermal, Mechanical, Rheological, and Permeability Properties of PLLA/PEG/SiO2 Biocomposites

Enhancing CO2 Transport Across the PEG/PPG-Based Crosslinked Rubbery Polymer Membranes with a Sterically Bulky Carbazole-Based ROMP Comonomer

Synthesis and Characterization of Poly(propylene oxide-lactide) Diblock Copolymer

Effects of L-lactide and D,L-lactide in poly(lactide-co-glycolide)-poly(ethylene glycol)-poly(lactide-co-glycolide) on the bulk states of triblock copolymers, and their thermogellation and biodegradation in water

Design of Novel PLA/OMMT Films with Improved Gas Barrier and Mechanical Properties by Intercalating OMMT Interlayer with High Gas Barrier Polymers

Amphiphilic PEG‐grafted Poly(ester‐carbonate)s: Synthesis and Diverse Nanostructures in Water

Poly(ethylene oxide)--poly(propylene oxide)--poly(ethylene oxide)--poly(vinyl pyrrolidone): Synthesis and characterization

Colloidal Characteristics of Poly(L-Lactic Acid)-b-Poly (ε-Caprolactone) Block Copolymer-Based Nanoparticles Obtained by an Emulsification/Evaporation Method