Ignition, Propagation, and Stabilization of a Premixed Jet Flame from a Bluff-Body Burner

Guochang Wang,Jicang Si,Xiangtao Liu,Minyi Xu,Jianchun Mi
DOI: https://doi.org/10.1021/acs.energyfuels.1c00432
IF: 4.6541
2021-01-01
Energy & Fuels
Abstract:The warm-up and ignition together in real combustors is a complicated process that may involve either forced spark ignition (SI) or unforced autoignition (AI) or both (SI and AI). This numerical study is to systematically investigate both SI and AI processes of a premixed bluff-body (BB) flame in the coflow of exhaust gas, respectively, at two constant temperatures (300 K, 1500 K) and a rising temperature (300-1500 K). The high-temperature sparking (2500 K) is applied in the recirculation zone (RZ) behind a BB to mimic the actual SI. With this sparking, SI kernel appears immediately downstream of the BB, forming a traditional flame. Moreover, under high-temperature (>minimal self-ignition value) hot coflow, AI occurs in the downstream mixing layer and evolves into an AI flame. Later, the AI-generated flame joins up with the upstream BB flame. Such ignition processes are observed in all the 2500 K sparking cases under the heated-up coflow (with different heating times) or constant-temperature coflow, though AI kernels appear later and develop more slowly in the former. Further analyses show that both traditional BB flame and lift-off AI-generated flame coexist in the final state, which are connected by a thin neck zone around the RZ end. Furthermore, both low temperature (1500 K) sparking and nonsparking cases are investigated. It is found that the low-temperature SI fails with only CH2O and CO generations and no OH and ignition kernels are produced, while AI still occurs in the downstream mixing layer. Additionally, in all the 1500 K sparking and nonsparking cases, AI kernels firstly arise in the mixing layer and then propagate into the central area, finally forming an invisible lifted "flame" in the regime of MILD combustion (MC).
What problem does this paper attempt to address?