Abstract:An afterburner encounters two primary features: high incoming flow velocity and low oxygen concentration in the incoming airflow, which pose substantial challenges and contribute significantly to the deterioration of combustion performance. In order to research the influence of oxygen content on the dynamic combustion characteristics of the afterburner under various inlet velocities, the effect of oxygen content (14–23%) on the field structure of reacting bluff body flow, flame morphology, temperature pulsation, and pressure pulsation of the afterburner at different incoming flow velocities (0.1–0.2 Ma) was investigated in this study by using a large eddy simulation method. The results show that two different instability features, BVK instability and KH instability, are observed in the separated shear layer and wake, and are influenced by changes in the O2 mass fraction and Mach number. The oxygen content and velocity affected the oscillation amplitude of the downstream flow. As the O2 mass fraction decreases, the flame oscillation amplitude increases, the OH concentration in the combustion chamber decreases, and the flame temperature decreases. Additionally, the amplitude of the temperature pulsation in the bluff body flame was primarily influenced by the temperature intensity of the flame and BVK instability. Moreover, the pressure pulsation is predominantly affected by the dynamic characteristics of the flow field behind the bluff body. When the BVK instability dominated, the primary frequency of the pressure pulsation aligned with that of the temperature pulsation. Conversely, under the dominance of the KH instability, the temperature pulsation did not exhibit a distinct main frequency. At present, the influence of oxygen content and incoming flow rate on the combustion performance of the combustion chamber is not clear. The study of the effect of oxygen content on the combustion characteristics of the combustion chamber at different incoming flow rates provides a reference for improving the performance of the combustion chamber and enhancing the combustion stability.

ICOPE-15-C047 Dynamics of Non-premixed Flames with Modulations in the Air Flow for a Bluff-body Burner

Spray Swirling Flame Dynamic under Combined Modulation of Air and Fuel

Multi-bifurcation behaviors of stability regimes in a centrally staged swirl burner

Flow, Mixing, and Flame Stabilization in Bluff-Body Burner with Decreased Central Jet Velocity

Exploring Vortex–Flame Interactions and Combustion Dynamics in Bluff Body-Stabilized Diffusion Flames: Effects of Incoming Flow Velocity and Oxygen Content

Characteristics of Flame Modes for A Conical Bluff Body Burner with A Central Fuel Jet

Flame Interaction and Stabilization Mechanisms in a Dual Premix Swirl Combustor with a Pilot Bluff Body

Tangential Mode Combustion Oscillation of a Bluff-Body-Stabilized Diffusion Flame: Experiments

Experimental Characterization of Flame/flow Dynamics During Transition Between Stable and Thermo-Acoustically Unstable Conditions in a Gas Turbine Model Combustor

Flame dynamics and combustion instability induced by flow-flame interactions in a centrally-staged combustor

Experimental investigation of combustion instability in a centrally staged combustor under self-excited oscillation conditions

Investigation on Bluff-Body and Swirl Stabilized Flames Near Lean Blowoff with PIV/PLIF Measurements and LES Modelling

Experimental Study on Turbulent Structure of Humid Air Flame in A Bluff-Body Burner

Experimental Study on Combustion Instability of Lean Premixed Swirl Flame

Experimental Investigation and Numerical Analysis on the Blow-off Limits of Premixed CH4/air Flames in a Mesoscale Bluff-Body Combustor

Investigation of the Influence of the Bluff-Body Temperature on a Lean Premixed DME/air Flame Approaching Blowoff

Velocity Characteristic Distribution With Variation of Flames in Bluff-body Burner

Measurements and analysis of premixed flame transfer function

Flame visualization and spectral analysis of combustion instability in a premixed methane/air-fueled micro-combustor

Flame dynamics and oscillation characteristics based on statistical analysis in a combustor with prefilming and non-prefilming atomization

Flame interactions in a stratified swirl burner: flame stabilization, combustion instabilities and beating oscillations