Effect of Fuel Reactivity on Flame Properties of a Low-Swirl Burner
Muhammad Saqib Akhtar,Mohammad Shahsavari,Anupam Ghosh,Zahid Hussain,Zhuming Rao,Wang Bing
DOI: https://doi.org/10.1016/j.expthermflusci.2022.110795
IF: 3.2
2022-10-21
Experimental Thermal and Fluid Science
Abstract:The present paper examines the capability of low swirl flows in stabilizing low calorific value fuels. To such an aim, CO 2 gas is used to adjust the reactivity of CH 4 /air mixtures. The results show that increases in CO 2 percentage in the fresh mixture result in shrinking the burner stability map by moving the lean and rich blowout limits toward the stoichiometric condition. The effects of CO 2 addition on rich blowout limits are more intense than the lean blowout limits. For instance, the equivalence ratio associated with the lean blowout increases by 0.23, when the discharge flow velocity from the burner rises from 1.5 to 5m/s in the 40% CO 2 diluted case. Under a similar augmentation in the burner discharge velocity, the rich blowout limit reduces by more than 0.5 in the 40% CO 2 diluted case. Unlike the lean blowout, the rich blowout limit responds non-monotonically to the discharge flow velocity from the burner for both undiluted and diluted mixtures. For the 50% CO 2 diluted case, the low swirl burner operates efficiently at low discharge velocities (1.5 to 3.5 m/s), but it blows out at high discharge velocities (3.5 to 9 m/s). Furthermore, unsteady features of low swirl flame near blowout limits are studied in detail. Moreover, strong curvy structures appear at the flame boundary prior to the flame flashback. However, such structures diminish occasionally and specifically as the flame approaches the flashback. Some deterministic features are more obvious before the flame blowout than those before the flame flashback.
engineering, mechanical,thermodynamics,physics, fluids & plasmas