Abstract:The application of organic coatings is the most cost-effective and common method for metallic equipment toward corrosion, whose anti-corrosion property needs to be improved and evaluated in a short time. To rapidly and rationally assess the anti-corrosion property of organic coatings in the ocean splash zone, a new accelerated test was proposed. In the study, the corrosion protection property of the coating samples was measured by an improved AC-DC-AC test in a simulated seawater of 3.5 wt.% NaCl solution, a simulated ocean splash zone test and a new accelerated test combining the above two tests. The results showed that the corrosion rate of the coating samples was high in the improved AC-DC-AC test, which lost its anti-corrosion property after 24 cycles equal to 96 h. The main rapid failure reason was that the time of the water and corrosive media arriving at the carbon steel substrate under the alternating cathodic and anodic polarization with symmetrical positive and negative electric charges was shortened. The entire impedance of the coating samples was improved by about 1.6 times more than that in the initial early time in the simulated ocean splash zone test, which was caused by the damage effect from the salt spraying, drying, humidifying, salt immersion, high temperature and UVA irradiation being weaker than the enhancement effect from the post-curing process by the UVA irradiation. In the new accelerated test, the samples lost their corrosion resistance after 12 cycles equal to 288 h with the fastest failure rate. On account of the coupling process of the salt spraying, drying, humidifying, salt immersion, high temperature combined with the cathodic and anodic polarization and the UVA irradiation, the penetration and transmission rate of water and corrosive media in the coating were further accelerated, the corrosion rate on the carbon steel substrate was reinforced even larger and the destruction of the top polymer molecules was more serious. The new accelerated test showed the strongest damage-acceleration effect than that in the other two tests.

The Corrosion Damage of an Organic Coating Accelerated by Different AC-DC-AC Tests

Polarization-Accelerated Seawater Splash Simulation for Rapid Evaluation of Protection Performance of an Epoxy Coating on Carbon Steel

Corrosion of Steel Embedded in Mortar and Concrete under Different Electrolytic Accelerated Corrosion Methods

Influence of AC-DC-AC Cycling with Hydrostatic Pressure on Accelerated Protective Performance Test of Glass Flake Epoxy Coating

Comparative Studies on the Deterioration Process of Organic Coatings under Immersed and Cyclic Wet-Dry Conditions by EIS

Electrochemical Methods to Determine Corrosion Protection of Coatings

Degradation Behaviors of Two Epoxy Coatings after Dry/Wet-Accelerated Fog Exposure of Different Solutions

Study on the Correlation Between Indoor Accelerated Corrosion Testing of Concrete Epoxy Polysiloxane Coating and Real-Sea Environmental Testing in the East China Sea

Degradation Damage of Stress Corrosion in Epoxy Zinc-Rich Coating/Steel Substrate Systems

EIS STUDY ON THE DETERIORATION PROCESS OF ORGANIC COATINGS UNDER IMMERSION AND CYCLIC WET-DRY CONDITIONS

Influence of the composition of working fluids on flow-accelerated organic coating degradation: Deionized water versus electrolyte solution

A New Corrosion Sensor To Determine The Start And Development Of Embedded Rebar Corrosion Process At Coastal Concrete

Synergistic acceleration effects of ultraviolet and salt spray on the degradation and failure of electromagnetic wave-absorbing coatings

Flow Accelerated Degradation of Corrosion Protective Organic Coatings

ACCELERATING DEGRADATION OF ORGANIC PROTECTION COATING UNDER FLOW STATE

Corrosion Development of Carbon Steel Grids and Shear Connectors in Cracked Composite Beams Exposed to Wet-Dry Cycles in Chloride Environment.

Experimental study and finite element analysis of degradation behavior of epoxy zinc-rich coating system under stress corrosion

Development on Electrochemical Impedance Spectroscopy Technology in Metal Corrosion and Coating Anticorrosion

A New Acceleration Factor for the Testing of Corrosion Protective Coatings: Flow-Induced Coating Degradation

Failure Behavior of Protective Organic Coatings under Corrosive Conditions

THE EFFECT OF CYCLIC LOADING ON CATHODIC DELAMINATION BEHAVIOUR OF ORGANIC COATING ON STEEL SUBSTRATE