Comparative Study on the Degradation of Two Self-Polishing Antifouling Coating Systems with Copper-Based Antifouling Agents
Hanlu Zhang,Jingyi Cao,Li Sun,Fabao Kong,Jianhua Tang,Xuhui Zhao,Yuming Tang,Yu Zuo
DOI: https://doi.org/10.3390/coatings12081156
IF: 3.236
2022-08-11
Coatings
Abstract:The degradation processes of two self-polishing antifouling coatings containing copper-based agents (CuSCN and Cu2O) in 3.5% NaCl solution and the protection effect of the coating systems were studied by electrochemical impedance spectroscopy (EIS), Fourier transform infrared spectroscopy (FTIR) and scanning electron microscope (SEM/EDS) methods. The results demonstrate that after immersion for 1525 d at room temperature, the two coating systems still have very good protection property for the 5083 Al alloy substrate, manifesting by the high value of the low-frequency impedance. Alternate high and low temperature immersion test (45 °C 12 h + 25 °C 12 h) leads to serious damage to the antifouling topcoat, and the failure is mainly manifested by many micro-pores and micro-cracks. Because the CuSCN antifouling agent particle has bigger diameter and slightly bigger solubility than that of Cu2O agent, the micro-pores established after the agents dissolved and released during the hydrolysis process of the antifouling coating are relatively bigger, which results in more decrease in the impedance and a worse protective property of the coating system for the substrate.
materials science, multidisciplinary,physics, applied, coatings & films