Abstract:This paper presents advancements in the performance of digital phase-locked loop (DPLL)s, with a special focus on addressing the issue of required gain calibration in the time-to-digital converter (TDC) within phase-domain DPLL structures. Phase-domain DPLLs are preferred for their simplicity in implementation and for eliminating the delta–sigma modulator (DSM) noise inherent in conventional fractional-N designs. However, this advantage is countered by the critical need to calibrate the gain of the TDC. The previously proposed dual-interpolated TDC(DI-TDC) was proposed as a solution to this problem, but strong spurs were still generated due to the TDC resolution, which easily became non-uniform due to PVT variation, degrading performance. To overcome these problems, this work proposes a DPLL with a new calibration system that ensures consistent TDC resolution matching the period of the digitally controlled oscillator (DCO) and operating in both the foreground and background, thereby maintaining consistent performance despite PVT variations. This study proposes a DPLL using a calibrated dual-interpolated TDC that effectively compensates for PVT variations and improves the stability and performance of the DPLL. The PLL was fabricated in a 28-nm CMOS process with an active area of only 0.019 mm2, achieving an integrated phase noise (IPN) performance of −17.5 dBc, integrated from 10 kHz to 10 MHz at a PLL output of 570 MHz and −20.5 dBc at 1.1 GHz. This PLL operates within an output frequency range of 475 MHz to 1.1 GHz. Under typical operating conditions, it consumes only 930 μW with a 1.0 V supply.

Design and Analysis of DTC-Free ΔΣ Bang-Bang Phase-Locked Loops.

A Noise and Spur Reduction Technique for ΔΣ Fractional-N Bang-Bang PLLs with Embedded Phase Domain Filtering.

A 2.6ghz ΔΣ Fractional-N Bang-Bang PLL with FIR-Embedded Injection-Locking Phase-Domain Low-Pass Filter

A Fractional-N PLL for Multiband (0.8–6 GHz) Communications Using Binary-Weighted D/A Differentiator and Offset-Frequency Δ-Σ Modulator

A Compact 0.8–6ghz Fractional-N PLL with Binary-Weighted D/A Differentiator and Offset-Frequency Δ−Σ Modulator for Noise and Spurs Cancellation

A 5.4ghz ΔΣ Bang-Bang PLL with 19db In-Band Noise Reduction by Using a Nested PLL Filter

A ΔΣ DPLL with 1b TDC, 4b DTC and 8-tap FIR filter for low-voltage clock generation/modulation systems

A DTC-Free Fractional-N BBPLL with FIR-Embedded Injection-Locked-Oscillator-Based Phase-Domain Lowpass Filter

A fractional-NBB-DPLL with auto-tuned DTC and FIR filter for noise and spur reduction

An 11.1-to-14.9ghz Digital-Integral Hybrid-Proportional Fractional-N PLL with an LC DTC Achieving 0.52μs Locking Time and 41.3f5 Jitter

Analysis and Design of Low-Jitter Digital Bang-Bang Phase-Locked Loops

An 8-14Ghz 180Fs-Rms DTC-Less Fractional ADPLL with ADC-Based Direct Phase Digitization in 40nm CMOS

A BBPLL-Based Demodulator with Multiphase and Feedforward Linearization Methods for Phase-Tracking Receivers

A Design-Oriented Study Of The Nonlinear Characteristics Of Bang-Bang Phase-Locked Loops

A 2.5mw Fully-Passive 2Nd-Order Noise-Shaping Bang-Bang PLL with Adaptive DCO Gain Controller Achieving 305-Fsrms Jitter and –246.3 Db FoM

An Overview of Digital-Intensive ΔΣ Phase-Locked Loops Utilizing 1-Bit Conversion and Modulation.

A Bias-Current-Free Fractional-N Hybrid PLL for Low-Voltage Clock Generation

A Fractional- N DTC-based ADPLL using path-select multi-delay line TDC and true fractional division technique

Linearization Technique for Bang-Bang Digital Phase Locked-Loop by Optimal Loop Gain Control

A Newphase Noise Cancelling Technique for Fractional-N PLL

A Fully Synthesizable Fractional-N Digital Phase-Locked Loop with a Calibrated Dual-Referenced Interpolating Time-to-Digital Converter to Compensate for Process–Voltage–Temperature Variations