Abstract:In a Battery Management System (BMS), cell balancing plays an essential role in mitigating inconsistencies of state of charge (SoCs) in lithium-ion (Li-ion) cells in a battery stack. If the cells are not properly balanced, the weakest Li-ion cell will always be the one limiting the usable capacity of battery pack. Different cell balancing strategies have been proposed to balance the non-uniform SoC of cells in serially connected string. However, balancing efficiency and slow SoC convergence remain key issues in cell balancing methods. Aiming to alleviate these challenges, in this paper, a hybrid duty cycle balancing (H-DCB) technique is proposed, which combines the duty cycle balancing (DCB) and cell-to-pack (CTP) balancing methods. The integration of an H-bridge circuit is introduced to bypass the selected cells and enhance the controlling as well as monitoring of individual cell. Subsequently, a DC-DC converter is utilized to perform CTP balancing in the H-DCB topology, efficiently transferring energy from the selected cell to/from the battery pack, resulting in a reduction in balancing time. To verify the effectiveness of the proposed method, the battery pack of 96 series-connected cells evenly distributed in ten modules is designed in MATLAB/Simulink software for both charging and discharging operation, and the results show that the proposed H-DCB method has a faster equalization speed 6.0 h as compared to the conventional DCB method 9.2 h during charging phase. Additionally, a pack of four Li-ion cells connected in series is used in the experiment setup for the validation of the proposed H-DCB method during discharging operation. The results of the hardware experiment indicate that the SoC convergence is achieved at ~ 400 s.

Battery voltage transfer method for multi-cells Li-ion battery pack protection chips

New battery management system for multi-cell li-ion battery packs

Design and implementation of a multifunctional management chip for multi-cell Li-ion batteries in series

A New Battery Management System for Li-Ion Battery Packs

Improved Voltage Transfer Method For Lithium Battery String Management Chip

A Passive Balancing Algorithm for Multi-Cells

A Low-Power Voltage Reference Source for Lithium Battery Protection ICs

Li-ion battery management chip for multi-cell battery pack

A protection chip for three lithium cells.

Cell balancing management for battery pack

Hierarchical State-of-Charge Balancing and Second-Harmonic Current Suppressing Control with a Scalable DC Reconfigurable Battery Pack

A novel active cell balancing topology for serially connected Li-ion cells in the battery pack for electric vehicle applications

An Active State of Charge Balancing Method With LC Energy Storage for Series Battery Pack

A MultiWinding Transformer Cell-to-Cell Active Equalization Method for Lithium-Ion Batteries with Reduced Number of Driving Circuits

A safety design strategy for practical lithium-ion pouch cells

An any-cell(s)-to-cell(s) equalization method with a single magnetic component for Lithium-ion battery pack

Soc Based Battery Cell Balancing With A Novel Topology And Reduced Component Count

An Active Direct Cell-to-Cell Balancing Circuit in Continuous Current Mode for Series Connected Batteries

A Novel Balancing Strategy for Series-Connected Lithium Batteries Based on Mixed Charging Mode

Li-ion Battery Charging Controller Based on Interruptible Constant Voltage-Constant Current Algorithm

Adaptive Balancing Control of Cell Voltage in the Charging/Discharging Mode for Battery Energy Storage Systems