Abstract:Lithium ion batteries have a very wide application range. They can power up small electronic devices such as smart watches to larger electric vehicles. Due to its varied range of applications, they come in different packaging and in such battery packs, even when individual cell voltage exceeds by a few milli‐volts above 4.2 V, it may result in thermal runaway and explode the cell. During discharge cycle, cell imbalances hinder the use of battery to its full capacity. This in turn decreases the battery lifetime. The individual battery cells should be equalized on a regular basis to keep the imbalances to a minimum and to have a good battery life. The process of balancing the individual cell charges by measuring the cell State of Charge (SoC) and its voltage in a battery pack is known as Cell Balancing. This paper details an active cell balancing technique that uses a buck converter for balancing a series connected battery pack of lithium‐ion cells. The buck converter is constructed from two MOSFET switches, one turned on for charging the cells and the other one is used for discharging the cells. An algorithmic model that measures the individual cell voltages based on charge equalization is developed for a pack of series connected Li‐ion battery cells. The developed model is simulated using MATLAB for verifying its performance. It is found that this algorithmic model produces a state of charge of 2.5% among the cells in a short period as compared to the conventional cell balancing technique. This parameter directly defines the cell equalization time and thus it is found that the system responds faster. The results show that this method can self‐adaptively attain satisfactory performance within a limited equalizing period. Lithium‐ion batteries have a very wide application range. They can power up small electronic devices such as smart watches to larger electric vehicles. Due to its varied range of applications, they come in different packaging and in such battery packs, even when individual cell voltage exceeds by a few milli‐volts above 4.2 V, it may result in thermal runaway and explode the cell. During discharge cycle, cell imbalances hinder the use of battery to its full capacity. This in turn decreases the battery lifetime. The individual battery cells should be equalized on a regular basis to keep the imbalances to a minimum and to have a good battery life. The process of balancing the individual cell charges by measuring the cell state of charge (SoC) and its voltage in a battery pack is known as cell balancing. This paper details an active cell balancing technique that uses a buck converter for balancing a series connected battery pack of lithium‐ion cells. A buck converter along with a pair of MOSFET switches for each cell, one turned on for charging the cell and the other one turned on while discharging the cell is used in this experiment. An algorithmic model suitable for reconfigurable battery systems that measures the individual cell voltages and is developed for balancing a pack of series connected Li‐ion battery cells. The developed model is simulated using MATLAB for verifying its performance. A state of charge of 25% is maintained across the cells and when SoC value drops below this even a difference of 0.02% is sensed by the algorithm to initiate balancing function. This balancing is found to take 275 ms to balance three 3.7 V batteries and thus the model is found to respond faster. The results show that this method can self‐adaptively attain satisfactory performance within a limited equalizing period.

An any-cell(s)-to-cell(s) equalization method with a single magnetic component for Lithium-ion battery pack

Development of an Active Equalizer for Lithium-Ion Batteries

Hybrid equalization scheme for a lithium‐ion battery pack based on a three‐winding transformer

Active Equalization Strategy for Lithium-Ion Battery Packs Based on Multilayer Dual Interleaved Inductor Circuits in Electric Vehicles

A novel double-layer active equalization scheme for lithium-ion batteries combining wireless power transfer

Bidirectional Constant Current String-to-Cell Battery Equalizer Based on L2C3 Resonant Topology

Bidirectional Active Equalization Control of Lithium Battery Pack Based on Energy Transfer

A crossed pack-to-cell equalizer based on quasi-resonant LC converter with adaptive fuzzy logic equalization control for series-connected lithium-ion battery strings

A multi-winding transformer-based active cell equalizer with self-driven switches for series-connected lithium-ion batteries and super-capacitors

Fuzzy Logic Control-Based Charge/Discharge Equalization Method for Lithium-Ion Batteries

A Novel Active Equalization Method for Lithium-Ion Batteries in Electric Vehicles

Improved Cell Equalizing Topology for Serially Connected Lithium-Ion Battery Packs

High-performance lithium-ion battery equalization strategy for energy storage system

Active Equalization for Lithium-Iron Battery Pack Based on Reduced-Order Solving Strategy for the Hanoi Tower Problem

Cell Balancing Control For Serially Connected Lithium-Ion Batteries

Cell Balancing Control For Lithium-Ion Battery Packs: A Hierarchical Optimal Approach

Novel voltage equalisation circuit of the lithium battery pack based on bidirectional flyback converter

A Novel Lithium-ion Battery Active Equalization Structure and Its Control Strategy Based on Bidirectional Converter Unit

Investigation of active cell balancing performance for series connected lithium‐ion cells in electric vehicle applications

An Active Equalization Technique Based on Flyback Converter Topology

An active balancer with rapid bidirectional charge shuttling and adaptive equalization current control for lithium‐ion battery strings