Abstract:Lithium ion batteries have a very wide application range. They can power up small electronic devices such as smart watches to larger electric vehicles. Due to its varied range of applications, they come in different packaging and in such battery packs, even when individual cell voltage exceeds by a few milli‐volts above 4.2 V, it may result in thermal runaway and explode the cell. During discharge cycle, cell imbalances hinder the use of battery to its full capacity. This in turn decreases the battery lifetime. The individual battery cells should be equalized on a regular basis to keep the imbalances to a minimum and to have a good battery life. The process of balancing the individual cell charges by measuring the cell State of Charge (SoC) and its voltage in a battery pack is known as Cell Balancing. This paper details an active cell balancing technique that uses a buck converter for balancing a series connected battery pack of lithium‐ion cells. The buck converter is constructed from two MOSFET switches, one turned on for charging the cells and the other one is used for discharging the cells. An algorithmic model that measures the individual cell voltages based on charge equalization is developed for a pack of series connected Li‐ion battery cells. The developed model is simulated using MATLAB for verifying its performance. It is found that this algorithmic model produces a state of charge of 2.5% among the cells in a short period as compared to the conventional cell balancing technique. This parameter directly defines the cell equalization time and thus it is found that the system responds faster. The results show that this method can self‐adaptively attain satisfactory performance within a limited equalizing period. Lithium‐ion batteries have a very wide application range. They can power up small electronic devices such as smart watches to larger electric vehicles. Due to its varied range of applications, they come in different packaging and in such battery packs, even when individual cell voltage exceeds by a few milli‐volts above 4.2 V, it may result in thermal runaway and explode the cell. During discharge cycle, cell imbalances hinder the use of battery to its full capacity. This in turn decreases the battery lifetime. The individual battery cells should be equalized on a regular basis to keep the imbalances to a minimum and to have a good battery life. The process of balancing the individual cell charges by measuring the cell state of charge (SoC) and its voltage in a battery pack is known as cell balancing. This paper details an active cell balancing technique that uses a buck converter for balancing a series connected battery pack of lithium‐ion cells. A buck converter along with a pair of MOSFET switches for each cell, one turned on for charging the cell and the other one turned on while discharging the cell is used in this experiment. An algorithmic model suitable for reconfigurable battery systems that measures the individual cell voltages and is developed for balancing a pack of series connected Li‐ion battery cells. The developed model is simulated using MATLAB for verifying its performance. A state of charge of 25% is maintained across the cells and when SoC value drops below this even a difference of 0.02% is sensed by the algorithm to initiate balancing function. This balancing is found to take 275 ms to balance three 3.7 V batteries and thus the model is found to respond faster. The results show that this method can self‐adaptively attain satisfactory performance within a limited equalizing period.

Cell Balancing Control For Lithium-Ion Battery Packs: A Hierarchical Optimal Approach

Optimal Cell-to-Cell Balancing Topology Design for Serially Connected Lithium-Ion Battery Packs

Module-Based Active Equalization for Battery Packs: A Two-Layer Model Predictive Control Strategy

Cell Balancing Control For Serially Connected Lithium-Ion Batteries

Improved Cell Equalizing Topology for Serially Connected Lithium-Ion Battery Packs

Active Cell Balancing for Extended Operational Time of Lithium-Ion Battery Systems in Energy Storage Applications

SOC Estimation-Based Quasi-Sliding Mode Control for Cell Balancing in Lithium-Ion Battery Packs

Design and Control of Bidirectional Active Balancing Model for Lithium-Ion Battery Pack

Adaptive estimation-based hierarchical model predictive control methodology for battery active equalization topologies: Part I–Balancing strategy

A fast active balancing strategy based on model predictive control for lithium-ion battery packs

Extending Life of Lithium-Ion Battery Systems by Embracing Heterogeneities via an Optimal Control-Based Active Balancing Strategy

Optimal Multi-Objective Cell Balancing For Battery Packs With Quadratic Programming

System State Estimation and Optimal Energy Control Framework for Multicell Lithium-Ion Battery System

A Unified Model for Active Battery Equalization Systems

Development of an Active Equalizer for Lithium-Ion Batteries

Optimizing Control for System-Wide State-of-Charge Balancing in Cascaded H-Bridge Battery Energy Storage Systems

Active Equalization for Lithium-Iron Battery Pack Based on Reduced-Order Solving Strategy for the Hanoi Tower Problem

Investigation of active cell balancing performance for series connected lithium‐ion cells in electric vehicle applications

Optimal Multiobjective Charging for Lithium-Ion Battery Packs: A Hierarchical Control Approach

Hierarchical State-of-Charge Balancing and Second-Harmonic Current Suppressing Control with a Scalable DC Reconfigurable Battery Pack

A novel active cell balancing topology for serially connected Li-ion cells in the battery pack for electric vehicle applications