Abstract:In this paper, a bi-directional-buck-boost-converter-based active equalizer is developed. The energy between adjacent cells can be transferred bi-directionally by manipulating the balancing current to solve the unbalanced problem in a battery module. It is noted that the conduction time of the main switch in the conventional buck-boost equalizer is fixed. Thus, the balancing current will diminish as the voltage difference of the adjacent cells decreases, which results in a prolonged equilibrium period. This paper has proposed two methods, namely, the varied-on-time (VOT) method and the voltage ratio modulation (VRM) method, to shorten the equilibrium period. In the VOT method, the conduction time of the main switch is determined according to high state-of-charge (SOC) cell voltage. In this way, the balancing current is able to be kept at the desired level rather than reduced during the balancing process. On the other hand, the VRM method computes the proportion of the conduction time and the cut-off time in a switching cycle based on the voltages of adjacent cells. Hence, the equalizer can deliver the maximum energy in a switching period and shorten the equilibrium period. The simulation platform and experiments with four batteries connected in serial are carried out to verify the proposed control methods. According to the experimental results, the VOT method saves 10.3%, 11.7%, and 16% of the equilibrium time compared with the fixed duty cycle (FDC) method. The VRM method can shorten 35.9%, 36.6%, and 37.3% of the equilibrium time compared with the FDC method.

A multi-winding transformer-based active cell equalizer with self-driven switches for series-connected lithium-ion batteries and super-capacitors

A MultiWinding Transformer Cell-to-Cell Active Equalization Method for Lithium-Ion Batteries with Reduced Number of Driving Circuits

An Efficient and Compact Equalizer Based on Forward-Flyback Conversion for Large-Scale Energy Storage Systems

A Single-Magnetic Bidirectional Integrated Equalizer Using Multi-Winding Transformer and Voltage Multiplier for Hybrid Energy Storage System

Design and realization of active equalizer for lithium battery string

A Unitized Multiwinding Transformer-Based Equalization Method for Series-Connected Battery Strings

A crossed pack-to-cell equalizer based on quasi-resonant LC converter with adaptive fuzzy logic equalization control for series-connected lithium-ion battery strings

An Active Cell-to-cell Balancing Circuit with Planar Coupled Inductors for Series Connected Batteries

Development of an Active Equalizer for Lithium-Ion Batteries

A New Sort of Equalization Circuit Based on Coupled Inductors for Series-connected Battery Strings

Bidirectional Constant Current String-to-Cell Battery Equalizer Based on L2C3 Resonant Topology

Balancing Method Based on Flyback Converter for Series-Connected Cells

A New Kind of Balancing Circuit with Multiple Equalization Modes for Serially Connected Battery Pack

An any-cell(s)-to-cell(s) equalization method with a single magnetic component for Lithium-ion battery pack

Hybrid equalization scheme for a lithium‐ion battery pack based on a three‐winding transformer

A novel double-layer active equalization scheme for lithium-ion batteries combining wireless power transfer

A Low Cost Battery Equalizing Scheme with Buck-Boost and Series Lc Converter Using Synchronous Phase-Shift Controller

A Highly Scalable Integrated Voltage Equalizer Based on Parallel-Transformers for High-Voltage Energy Storage Systems

An Active Equalization Technique Based on Flyback Converter Topology

A Double-Switch Single-Transformer Integrated Equalizer for the Recycled Power Battery String of Automatic Guided Vehicles

Modularized Equalization Architecture With Transformer-Based Integrating Voltage Equalizer for the Series-Connected Battery Pack in Electric Bicycles