Abstract:Lithium ion batteries have a very wide application range. They can power up small electronic devices such as smart watches to larger electric vehicles. Due to its varied range of applications, they come in different packaging and in such battery packs, even when individual cell voltage exceeds by a few milli‐volts above 4.2 V, it may result in thermal runaway and explode the cell. During discharge cycle, cell imbalances hinder the use of battery to its full capacity. This in turn decreases the battery lifetime. The individual battery cells should be equalized on a regular basis to keep the imbalances to a minimum and to have a good battery life. The process of balancing the individual cell charges by measuring the cell State of Charge (SoC) and its voltage in a battery pack is known as Cell Balancing. This paper details an active cell balancing technique that uses a buck converter for balancing a series connected battery pack of lithium‐ion cells. The buck converter is constructed from two MOSFET switches, one turned on for charging the cells and the other one is used for discharging the cells. An algorithmic model that measures the individual cell voltages based on charge equalization is developed for a pack of series connected Li‐ion battery cells. The developed model is simulated using MATLAB for verifying its performance. It is found that this algorithmic model produces a state of charge of 2.5% among the cells in a short period as compared to the conventional cell balancing technique. This parameter directly defines the cell equalization time and thus it is found that the system responds faster. The results show that this method can self‐adaptively attain satisfactory performance within a limited equalizing period. Lithium‐ion batteries have a very wide application range. They can power up small electronic devices such as smart watches to larger electric vehicles. Due to its varied range of applications, they come in different packaging and in such battery packs, even when individual cell voltage exceeds by a few milli‐volts above 4.2 V, it may result in thermal runaway and explode the cell. During discharge cycle, cell imbalances hinder the use of battery to its full capacity. This in turn decreases the battery lifetime. The individual battery cells should be equalized on a regular basis to keep the imbalances to a minimum and to have a good battery life. The process of balancing the individual cell charges by measuring the cell state of charge (SoC) and its voltage in a battery pack is known as cell balancing. This paper details an active cell balancing technique that uses a buck converter for balancing a series connected battery pack of lithium‐ion cells. A buck converter along with a pair of MOSFET switches for each cell, one turned on for charging the cell and the other one turned on while discharging the cell is used in this experiment. An algorithmic model suitable for reconfigurable battery systems that measures the individual cell voltages and is developed for balancing a pack of series connected Li‐ion battery cells. The developed model is simulated using MATLAB for verifying its performance. A state of charge of 25% is maintained across the cells and when SoC value drops below this even a difference of 0.02% is sensed by the algorithm to initiate balancing function. This balancing is found to take 275 ms to balance three 3.7 V batteries and thus the model is found to respond faster. The results show that this method can self‐adaptively attain satisfactory performance within a limited equalizing period.

An Active State of Charge Balancing Method With LC Energy Storage for Series Battery Pack

Novel Active Battery Balancing Methodologies for Lithium Batteries: An Experimental Comparative Analysis

Design and Control of Bidirectional Active Balancing Model for Lithium-Ion Battery Pack

Soc Based Battery Cell Balancing With A Novel Topology And Reduced Component Count

Optimizing Control for System-Wide State-of-Charge Balancing in Cascaded H-Bridge Battery Energy Storage Systems

An active balancer with rapid bidirectional charge shuttling and adaptive equalization current control for lithium‐ion battery strings

Composite Active Equilibrium Method for Lithium Ion Battery Pack

A New Kind of Balancing Circuit with Multiple Equalization Modes for Serially Connected Battery Pack

A novel active cell balancing topology for serially connected Li-ion cells in the battery pack for electric vehicle applications

Dual-Layer Inductor Active Equalization Control for Series-Connected Lithium-Ion Batteries Based on SOC Estimation

Lithium-Ion Battery SoC Equilibrium: An Artificial Potential Field-Based Method

Active Cell Balancing of Lithium-ion Battery Pack Using Dual DC-DC Converter and Auxiliary Lead-acid Battery

A Novel Balancing Strategy for Series-Connected Lithium Batteries Based on Mixed Charging Mode

A Novel Charging/discharging Balancing Strategy for Lithium Battery Pack Based on Mixed Charging Mode

Bidirectional Active Equalization Control of Lithium Battery Pack Based on Energy Transfer

Investigation of active cell balancing performance for series connected lithium‐ion cells in electric vehicle applications

SOC Estimation-Based Quasi-Sliding Mode Control for Cell Balancing in Lithium-Ion Battery Packs

Improved Battery Balancing Control Strategy for Reconfigurable Converter Systems

A Novel Battery Balancing Topology Coupled with Battery Reconfiguration

Active Equalization for Lithium-Iron Battery Pack Based on Reduced-Order Solving Strategy for the Hanoi Tower Problem

A Low Cost Battery Equalizing Scheme with Buck-Boost and Series Lc Converter Using Synchronous Phase-Shift Controller