Abstract:Lithium (Li) metal has been considered as a very promising anode material for next-generation batteries because of its low electronegativity (-3.04 V), low gravimetric density (0.53 g cc-1) and ultrahigh specific capacity (3860 mAh g-1). The recent simulations forecast that the rechargeable Li metal batteries (LMBs) coupled with the conventional transient metal oxide cathodes and the Li metal anode can deliver a high gravimetric energy density of up to 500 Wh kg-1.[1] However, major challenges including low Coulombic eﬃciency (CE), short cycle life, and safety concerns have plagued the practical applications of Li metal as anode in recharge batteries.[2] Here we present a simple approach to suppress dendritic Li metal growth by introducing a multifunctional Janus-faced separator. This separator is designed by coating metallic copper (Cu) thin film (CuTF) onto one side surface of conventional polyethylene (PE) membrane via simple sputtering technique. The CuTF of the obtained Janus separator (PE/CuTF) plays a crucial role of an additional conducting agent for facile Li metal deposition/stripping. Furthermore, its electrically conductive nature can guide the backside plating of Li metal and electrochemical Li metal merging, resulting in less dendritic Li metal deposition (Figure 1). The lifetime of Li metal anode is enhanced by preventing short circuit failures even under extensive Li metal deposition. LMBs with the PE/CuTF separator exhibit stable cycling performances and enhanced CE during extended cycles. Moreover, the CuTF coating can suppress the thermal shrinkage of the polymer separators and enable a current collector-less cell configuration for high energy density. K.G. Gallagher, S. Goebel, T. Greszler, M. Mathias, W. Oelerich, D. Eroglu, V. Srinivasan, Energy Environ. Sci. 7, 1555 (2014). Xu, J. Wang, F. Ding, X. Chen, E. Nasybulin, Y. Zhang, J.-G. Zhang, Energy Environ. Sci. 7, 513 (2014). Figure 1. Proposed working principle on Li dendrite suppression by using Janus-faced separator; (A) conventional PE separator and (B) Cu metal thin film (CuTF) coated Janus (PE/CuTF) separator. Figure 1

Dendrite-Suppressing Separator with High Thermal Stability Modified by Beaded-Chain-Like Polyimide Coating for a Li Metal Anode

Nanopile Interlocking Separator Coating toward Uniform Li Deposition of the Li Metal Anodes

A Simple Metallic Coating on Separator for Lithium Dendrite Suppression

Suppressing Dendrite Growth of a Lithium Metal Anode by Modifying Conventional Polypropylene Separators with a Composite Layer

Suppressing Lithium Dendrite Growth by Metallic Coating on a Separator

Dual-functional Separators Regulating Ion Transport Enabled by 3D-Reinforced Polyimide Microspheres Protective Layer for Dendrite-Free and High-Temperature Lithium Metal Batteries

Engineering the Li-ion flux and interfacial chemistry toward stable Li metal anode via a simple separator coating

Regulating Li ions transportation and deposition with Polydopamine/Polyethyleneimine Functional Separator for Superior Li Metal Battery

Functional lithiophilic polymer modified separator for dendrite-free and pulverization-free lithium metal batteries

Dual Structure-Material Design of Separators Toward Dendrite-Free Lithium Metal Anodes.

A Polyimine Aerogel Separator with Electron Cloud Design to Boost Li-ion Transport for Stable Li Metal Batteries.

An Ion-Released MgI 2 -Doped Separator Inducing a LiI-containing Solid Electrolyte Interphase for Dendrite-Free Li Metal Anodes

Polyhedral Oligomeric Silsesquioxane Modified Polyolefin Separator for Advanced Lithium–Metal Batteries

Bifunctional separator with high thermal stability and lithium dendrite inhibition toward high safety lithium-ion batteries

Upgrading the Separators Integrated with Desolvation and Selective Deposition toward the Stable Lithium Metal Batteries

Grafting Polyethyleneimine on Electrospun Nanofiber Separator to Stabilize Lithium Metal Anode for Lithium Sulfur Batteries

A single‐layer piezoelectric composite separator for durable operation of Li metal anode at high rates

Dendrite‐Free Lithium Metal Batteries Enabled by Coordination Chemistry in Polymer‐Ceramic Modified Separators

Design of Robust, Lithiophilic, and Flexible Inorganic‐Polymer Protective Layer by Separator Engineering Enables Dendrite‐Free Lithium Metal Batteries with LiNi 0.8 Mn 0.1 Co 0.1 O 2 Cathode

Crosslinked Polyimide Asymmetric Membranes As Thermally-Stable Separators with Self-Protective Layers and Inhibition of Lithium Dendrite Growth for Lithium Metal Battery

Inhibition of lithium dendrite growth in composite separator for semi-solid-state lithium metal batteries