Abstract:In state-of-the-art lithium ion batteries, separators (microporous membranes) play a passive yet critical role – hosting liquid electrolyte and maintaining physical separation of the electrodes. However, as the demands on lithium ion batteries increase, with an emphasis on greater energy density, longevity (cycle/calendar life), and safety, engineering separators to take a on more active role in the cell (electro)chemistry is expected to be an important strategy. Myriad membrane materials and separator designs have been developed to impart additional functionality, for example, acid and/or transition metal scavenging, temperature responsiveness, enhanced thermal stability, increased ion dissociation, combustion suppression, and mechanical strength. In this talk, I will preset my group's approach to additive manufacturing of next-generation lithium ion battery separators. Our approach is based on polymerization induced phase separation (PIPS), wherein polymerizable monomers (or prepolymer resins) are mixed with porogen. Through rapid, low-cost, readily scalable photopolymerization, the monomers are converted to a crosslinked polymer network, which results in the porogen becoming immiscible and phase separating through spinodal decomposition. By tuning the thermodynamics of the polymer-porogen mixture and photopolymerization kinetics, the porosity and pore size of the resulting polymeric phase can be tuned. We have shown that ethylene carbonate (EC) mixed with common acrylate monomers, such as 1,4-butanediol diacrylate, is an effective porogen. Most importantly because EC is an indispensable component in liquid electrolytes, it does not need to be extracted from the separator prior to incorporation into the electrochemical cell. By controlling the ratio of the 1,4-butanediol diacrylate (BDDA) monomer to EC, monolithic microporous membranes are readily prepared with 25 μm thickness and pore sizes and porosities ranging from 6.8 to 22nm and 15.4% to 38.54%, respectively. The optimal poly(1,4-butanediol diacrylate) (pBDDA) separator has a porosity of 38.5% and average pore size of 22 nm; uptakes 127% liquid electrolyte by mass, and has an ionic conductivity of 1.98 mS/cm, which is higher than that of Celgard 2500. Lithium ion battery half cells consisting of LiNi 0.5 Mn 0.3 Co 0.2 O 2 cathodes and pBDDA separators were shown to undergo reversible charge/discharge cycling with an average discharge capacity of 142 mAh/g and a capacity retention of 98.4% over 100 cycles - comparable to cells using state-of-the-art separators. Furthermore, the pBDDA separators were shown to be thermally stable to 400°C, lack low temperature thermal transitions that can compromise cell safety, and exhibits no thermal shrinkage up to 150°C. I will also discuss my group's efforts to engineer separators with additional functionality to improve cell performance under abuse conditions.

Crosslinked Polyimide Asymmetric Membranes As Thermally-Stable Separators with Self-Protective Layers and Inhibition of Lithium Dendrite Growth for Lithium Metal Battery

Novel Configuration of Polyimide Matrix-Enhanced Cross-Linked Gel Separator for High Performance Lithium Ion Batteries

High Thermal Resistance Polyimide Separators Prepared Via Soluble Precusor and Non-Solvent Induced Phase Separation Process for Lithium Ion Batteries

Metal‐Organic Framework Sandwiching Porous Super‐Engineering Polymeric Membranes as Anionphilic Separators for Dendrite‐free Lithium Metal Batteries

Scalable Preparation of Polyimide Sandwiched Separator for Durable High-Rate Lithium-Metal Battery

Dual-functional Separators Regulating Ion Transport Enabled by 3D-Reinforced Polyimide Microspheres Protective Layer for Dendrite-Free and High-Temperature Lithium Metal Batteries

Polyetherimide membrane with tunable porous morphology for safe lithium metal-based batteries

Organic‐Inorganic Dual‐Network Composite Separators for Lithium Metal Batteries

Porous, Robust, Thermal Stable, and Flame Retardant Nanocellu-lose/Polyimide Separators for Safe Lithium-Ion Batteries

Fast thermal responsive separators toward long-life and safe lithium metal batteries

Superspreading-Based Fabrication of Thermostable Nanoporous Polyimide Membranes for High Safety Separators of Lithium-Ion Batteries.

Dendrite‐Free Lithium‐Metal Batteries Enabled by 2D Lithophilic Conjugated Polymer on Separator

Simultaneously Blocking Chemical Crosstalk and Internal Short Circuit via Gel-Stretching Derived Nanoporous Non-Shrinkage Separator for Safe Lithium-Ion Batteries

Robust, High-Temperature-Resistant Polyimide Separators with Vertically Aligned Uniform Nanochannels for High-Performance Lithium-Ion Batteries

Dendrite‐Free Lithium Metal Battery Enabled by Dendritic Mesoporous Silica Coated Separator

Nanoporous and Lyophilic Battery Separator from Regenerated Eggshell Membrane with Effective Suppression of Dendritic Lithium Growth

Designing a Multifunctional Separator for High-Performance Li-S Batteries at Elevated Temperature

(Invited) Multifunctional Lithium Ion Battery Separators through Polymerization-Induced Phase Separation

Nanofiber membrane coated with lithiophilic polydopamine for lithium metal batteries

Thermally stable 3D cross-linked fluorinated polyimide/PVDF-HFP hybrid separator for lithium battery applications

A polymeric separator membrane with chemoresistance and high Li-ion flux for high-energy-density lithium metal batteries