Abstract:Multispectral thermometry is based on the law of blackbody radiation and is widely used in engineering practice today. Temperature values can be inferred from radiation intensity and multiple sets of wavelengths. Multispectral thermometry eliminates the requirements for single-spectral and spectral similarity, which are associated with two-colour thermometry. In the process of multispectral temperature inversion, the solution of spectral emissivity and multispectral data processing can be seen as the keys to accurate thermometry. At present, spectral emissivity is most commonly estimated using assumption models. When an assumption model closely matches an actual situation, the inversion of the temperature and the accuracy of spectral emissivity are both very high; however, when the two are not closely matched, the inversion result is very different from the actual situation. Assumption models of spectral emissivity exhibit drawbacks when used for thermometry of a complex material, or any material whose properties dynamically change during a combustion process. To address the above problems, in the present study, we developed a multispectral thermometry method based on optimisation ideas. This method involves analysing connections between measured temperatures of each channel in a multispectral temperature inversion process; it also makes use of correlations between multispectral signals at different temperatures. In short, we established a multivariate temperature difference correlation function based on the principles of multispectral radiometric thermometry, using information correlations between data for each channel in a temperature inversion process. We then established a high-precision thermometry model by optimising the correlation function and correcting any measurement errors. This method simplifies the modelling process so that it becomes an optimisation problem of the temperature difference function. This also removes the need to assume the relationships between spectral emissivity and other physical quantities, simplifying the process of multispectral thermometry. Finally, this involves correction of the spectral data so that any impact of measurement error on the thermometry is reduced. In order to verify the feasibility and reliability of the method, a simple eight-channel multispectral thermometry device was used for experimental validation, in which the temperature emitted from a blackbody furnace was identified as the standard value. In addition, spectral data from the 468–603 nm band were calibrated within a temperature range of 1923.15–2273.15 K, resulting in multispectral thermometry based on optimisation principles with an error rate of around 0.3% and a temperature calculation time of less than 3 s. The achieved level of inversion accuracy was better than that obtained using either a secondary measurement method (SMM) or a neural network method, and the calculation speed achieved was considerably faster than that obtained using the SMM method.

High Accurate Multi-Angular Polarized Spectrum Thermometry for Smooth Surface

Polarization interference interrogation of angular surface plasmon resonance sensors with wide metal film thickness tolerance

Design of Spectrophotometer for Measuring Polarized Transmittance and Reflectance at Different Temperature

Temperature Measurements of High-Temperature Semi-Transparent Infrared Material Using Multi-Wavelength Pyrometry

Multispectral Thermometry Method Based on Optimisation Ideas

Tunable Broadband Angular Selectivity for S-Polarized Terahertz Incidences

A Modified Interactive Spectral Smooth Temperature Emissivity Separation Algorithm for Low-Temperature Surface

A polarimeter based on electric-optical material

Quantitative Infrared Spectroscopy of Environmentally Sensitive and Rough Materials.

Multispectral radiation temperature data processing algorithm for high temperature complex material surface

Multi-Spectral Radiation Temperature Measurement: A High-Precision Method Based on Inversion Using an Enhanced Particle Swarm Optimization Algorithm with Multiple Strategies

Quick and accurate optical thermometry based on chemometrics model strategy in Na0.5Gd0.5TiO3: Er3+

Transparent Anisotropic Films Measurement with a Polarized Angle-Resolved Spectroscopy

Theoretical and Experimental Study of Spectral Selectivity Surface for Both Solar Heating and Radiative Cooling

VIS-NIR Multispectral Synchronous Imaging Pyrometer for High-Temperature Measurements.

Spectral Stray Light Effect on High-Temperature Measurements Using A Near-Infrared Multi-Wavelength Pyrometer

Direct method of extracting broadband complex refractive index from spectrophotometric measurements: an application to polydimethylsiloxane for passive radiative cooling

Multiparameter Spectrophotometry Platform for Turbid Sample Measurement by Robust Solutions of Radiative Transfer Problems.

Simultaneous measurement of normal spectral emissivity and temperature of materials with low thermal conductivity

High-precision temperature retrieval algorithm and verification for mesospheric airglow spectrum photometer

Data processing for simultaneous inversion of emissivity and temperature using improved CABCSMA and target-to-best DE algorithms in multispectral radiation thermometry (MRT)