Abstract:An in-situ measurement system for porous alumina (PA) film based on atomic force microscope (AFM) in liquid and reflectometric interference spectroscopy (RIFS) was developed. The present article briefly discusses the principle and structure of the system, and introduces its unique characteristic. The system consists of probe unit, XY scanner, Z-piezo feedback system, computer and software, fiber optic spectrometer, anodization control circuitry etc. When a white light beam illuminates the surface of the film, the reflective light beams at the front and back side of the layer are coherent, and lead to periodical amplifications and extinction in the reflective spectrum with the information of the optical thickness of the film. A fiber optic spectrometer was applied in the system which input the refractive spectrum into the computer by which the optical thickness of the film was calculated. Meanwhile according to the surface topography of PA films by AFM in liquid, the effective refractive index was calculated based on Maxwell-Garnett theory and coherent potential approximation (CPA). So the thickness of PA films could be gained at last. To checkout the feasibility and stability of the system, the real-time scanning and thickness measurement experiments were done during anodization of Al sheets in oxalic acid aqueous solution. In the experiment, the authors used 25 mm diameter aluminum (Al) sheets with 99.999% purity and 0.4 mm thickness as the anode, and graphite rod as the cathode. The pretreatment-cleaned Al sheets were anodized in an aqueous solution of 0.5 mol x L(-1) oxalic acid at the constant temperature (20 +/- 0.2) degrees C with 20 mA x cm(-2) anodization electronic current density. Real-time AFM images of PA film were successfully obtained during anodization. The pore-ratios of Al sheet were 7.81% and 13.83% at oxidizing time 150 min and 180 min respectively. Correspondingly, the effective indexes were calculated to be 1.62 and 1.60, respectively. Combining the reflective spectrum gained by the fiber optic spectrometer, the wave number differences between the two adjacent extrema were 57.69 mm(-1) and 50.00 mm(-1). Based on reflectometric interference spectroscopy, the thickness of PA films was found to be 5.35 and 6.25 microm with oxidizing time 150 min and 180 min respectively. The system has characteristics of convenient manipulation, non-destructive and high-resolution in-situ measurement. And the surface morphology, pore-ratio and effective refractive index can also be gained at the same time.

Transparent Anisotropic Films Measurement with a Polarized Angle-Resolved Spectroscopy

Anisotropic Optical Constants Of In-Plane Oriented Polyfluorene Thin Films On Rubbed Substrate

Measurement of Absolute Phase Shift on Reflection of Thin Films Using White-Light Spectral Interferometry

Determination of the optical constants of polymer light-emitting diode films from single reflection measurements

Polarization interference interrogation of angular surface plasmon resonance sensors with wide metal film thickness tolerance

Polarized angle-resolved spectral reflectometry for real-time ultra-thin film measurement

Optical Anisotropy of Polyethylene Terephthalate Films Characterized by Spectral Means

Study of In-Situ Measurement System for Porous Alumina Film Based on AFM and Reflectometric Interference Spectroscopy

A polarimeter based on electric-optical material

Measuring the Refractive Index and Thickness of a Thin Film: an Optical Polarization Experiment

A New Method for Measuring Multilayer Thickness Using a Chromatic Confocal Sensor

Polarization Measurement Method Based on Liquid Crystal Variable Retarder (LCVR) for Atomic Thin-Film Thickness

Spectral Interference Ellipsometry for Film Thickness Measurement on Transparent Substrate

Infrared Polariscopy Imaging of Linear Polymeric Patterns with a Focal Plane Array

Analyzing the Molecular Orientation of Ultrathin Organic Films by Polarized Transmission and Grazing Incidence Reflection Absorption IR Spectroscopy

Incoherent partial superposition modeling for single-shot angle-resolved ellipsometry measurement of thin films on transparent substrates

Polarimeters for the Detection of Anisotropy from Reflectance

Line-field Dispersive Interference Ellipsometry Based on an Anisotropic Crystal

Resolving conjugated polymer film morphology with polarised transmission and time-resolved emission microscopy

Large-Area Thickness Measurement of Transparent Films Based on a Multichannel Spectral Interference Sensor

Single-Shot Quantitative Polarization Imaging of Complex Birefringent Structure Dynamics