Abstract:The emission of NOx can causes serious environmental pollution and endangers human health. In recent years, the selective catalytic reduction of NO with NH3 (NH3‐SCR) technology has been widely studied and adopted to reduce the production and emissions of NOx during many technologies. A series of Mn–Ce–Cox/Ti–C,N catalysts were prepared by the impregnation method, and low‐temperature NH3–SCR was studied. The results show that support modification (Ti–C,N) can broaden the operation temperature window of the catalyst (NO conversion >95%: Mn–Ce/TiO2 catalyst, 160–320 °C; Mn–Ce/Ti–C,N catalyst, 140–320 °C). The doping of Co further improves the low‐temperature NH3‐SCR of the catalyst. When n(Co):n(Ti) = 0.05, the catalyst has the best catalytic performance with the NO conversion reaches 100% at 100 °C. Temperature‐programmed reduction (H2‐TPR) and temperature‐programmed desorption (NH3‐TPD) results showed that Ti–C,N can improve the redox ability but reduces the surface acidity. Co‐doping has no effect on surface acidity, but the redox ability is further improved. A suitable amount of Co‐doping is beneficial to the optimal catalytic activity of Mn–Ce–Co0.05/Ti–C,N catalyst. This suggests a balance between redox properties and surface acidity. Especially for the strong redox ability, it can promote the oxidation of NO to NO2, and promote low‐temperature NH3‐SCR through the ‘fast SCR’ pathway. X‐ray photoelectron spectroscopy results of the highest chemisorbed oxygen (Oα) concentration and relative atomic ratio (Mn4+/Mnn+, Ce3+/Cen+ and Co3+/Con+) confirmed the above conclusion. Both the Langmuir–Hinshelwood (L‐H) and Eley–Rideal (E‐R) mechanisms occurred in the NH3‐SCR reaction over the Mn–Ce–Co0.05/Ti–C,N catalyst. © 2021 Society of Chemical Industry

Structures and Catalytic Performances of Me/SAPO-34(Me=Mn,Ni,Co) Catalysts for Low-Tem Perature SCR of NO X by Ammonia

Structures and catalytic performances of Me/SAPO-34 (Me = Mn, Ni, Co) catalysts for low-tem perature SCR of NO by ammonia

Mnox/Ceo2/Sio2 Catalysts Prepared by Adsorption Phase Reaction Technique for Selective Catalytic Reduction of Nox at Low-Temperature

Tailoring the Proceeding of the NH3-SCO and NH3-SCR Reactions over FeOx Catalysts by Modifying with NbOx

an e ffi cient catalyst for the low-temperature selective catalytic reduction of NO x with NH 3

Low-temperature SCR of NOx by NH3 over MnOx/SAPO-34 prepared by two different methods: a comparative study

C,N‐modified TiO2‐supported Mn–Ce–Cox‐based Catalyst for Low‐temperature NH3‐SCR

Mn/SAPO-34 As an Efficient Catalyst for the Low-Temperature Selective Catalytic Reduction of NOx with NH3

One-step synthesis by redox co-precipitation method for low-dimensional Me-Mn bi-metal oxides (Me=Co, Ni, Sn) as SCR DeNOx catalysts

Synthesis of novel Co(3-x)MnxO4@TiO2 core-shell catalyst for low-temperature NH3-SCR of NOx with enhanced SO2 tolerance

Tunable Highly Dispersed Nia-xMnxAlOy Catalysts Derived from Layered Double Oxide for Low Temperature NOx Removal

Design of robust Co-doped Mn3O4 spinel catalysts for selective catalytic reduction of NO with NH3 at low temperatures

Optimization of catalytic activity of MnCoOx catalyst for NH3–SCR at low temperature by response surface method

Sm-MnO catalysts for low-temperature selective catalytic reduction of NO with NH3: Effect of precipitation agent

ff ect of manganese on Cu / SAPO for selective catalytic reduction of NO x with NH 3

Low-temperature SCR of NO with NH3 over AC/C Supported Manganese-Based Monolithic Catalysts

C,N ‐modified TiO 2 ‐supported Mn–Ce–Co x ‐based catalyst for low‐temperature NH 3 ‐SCR

Manganese–niobium Mixed Oxide Catalyst for the Selective Catalytic Reduction of NOx with NH3 at Low Temperatures

Low-cost Mn-Fe/SAPO-34 catalyst from natural ferromanganese ore and lithium-silicon-powder waste for efficient low-temperature NH3-SCR removal of NOx

MOF-74-M (M = Mn, Co, Ni, Zn, MnCo, MnNi, and MnZn) for Low-Temperature NH 3 -SCR and In Situ DRIFTS Study Reaction Mechanism

Catalytic Performance and Reaction Mechanisms of NO Removal with NH 3 at Low and Medium Temperatures on Mn-W-Sb Modified Siderite Catalysts