Abstract:This paper introduced a novel approach to enhance the vertical scanning angle of a large aperture 2D electromagnetic micromirror through the utilization of a cascaded torsional beam design. The primary objective was to increase the vertical scanning angle without compromising the robustness, which was achieved by optimizing the trade-off between the rotation angle and the first mode of resonant frequency. The cascaded design provides flexibility to either increase the outer frame's rotation angle without sacrificing torsional stiffness or enhance the torsion beam's stiffness while maintaining the same rotation angle, thus elevating the first-mode resonant frequency and overall robustness. The effectiveness of the cascaded design was demonstrated through a comparative study with a non-cascaded 2D micromirror possessing the same aperture size, torque, and mass moment of inertia. Theoretical analysis and finite-element simulation are employed to determine critical parameters such as the stiffness ratio between the cascaded torsion beams, and to predict improvements in the scanning angle and primary resonant frequency brought by the cascaded design. Prototypes of both cascaded and non-cascaded designs are fabricated using a flexible printed circuit board combined with Computer numerical control (CNC) machining of a Ti-alloy thin film, confirming the superior performance of the cascaded 2D micromirror. The cascaded design achieved vertical scanning angles up to 26% higher than the traditional design when both were actuated at close resonance frequencies. Additionally, the micromirror was successfully integrated into a 3D LiDAR system. The light detection and ranging (LiDAR) system was modelled in Zemax OpticStudio to find the optimized design and assembly positions.

Design and Fabrication of a Forward View Scanner on SiOB with Latch Structure for Improved Vertical Orientation

A Monolithic Forward-View Optical Scanner by a Pair of Upright MEMS Mirrors on a SiOB for LiDAR Applications

A Monolithic Forward-View MEMS Laser Scanner with Decoupled Raster Scanning and Enlarged Scanning Angle for Micro LiDAR Applications

An Integrated Forward-View 2-Axis Mems Scanner for Compact 3D Lidar

A Silicon Optical Bench-Based Forward-View Two-Axis Scanner for Microendoscopy Applications

A compact MEMS-based wide-angle optical scanner

A Silicon Optical Bench with Vertically-Oriented Micromirrors for Active Beam Steering

Design Study of a Large-Angle Optical Scanning System for MEMS LIDAR

Design and Realization of Wide Field-of-View 3D MEMS LiDAR

Design And Fabrication Of Soi-Based Micromirror For Laser Raster Scanning Display

Cascaded 2D Micromirror with Application to LiDAR

A 2D MEMS Crosstalk-Free Electromagnetic Micromirror for LiDAR Application

Low-voltage Wide-Field-of-view Lidar Scanning System Based on a MEMS Mirror.

A 45°-tilted 2-axis scanning micromirror integrated on a silicon optical bench for 3D endoscopic optical imaging

Development of an Electrostatic Comb-Driven MEMS Scanning Mirror for Two-Dimensional Raster Scanning

Wide-Angle Structured Light with A Scanning Mems Mirror in Liquid

Optical Design of a New Folding Scanning System in MEMS-based Lidar

MEMS mirror based omnidirectional scanning for lidar optical systems

MEMS Scanning Mirror with Vertical Comb Actuator Based on Latching Technique

A Scanning Micromirror with Stationary Rotation Axis and Dual Reflective Surfaces for 360° Forward-View Endoscopic Imaging

A Self-Aligned 45°-Tilted Two-Axis Scanning Micromirror for Side-View Imaging