Abstract:Mechanical behaviors of a Ni-based single crystal superalloy have been investigated by tensile testing at various temperatures. Deformation substructures and mechanisms have been systemically revealed from micrometer to atomic scales by using advanced scanning electron and scanning transmission electron microscopes. Results show that deformation mode of the alloy strongly depends on the temperature due to competitive responses of the gamma and gamma' phases under mechanical loading and their original stress statuses. At temperatures from ambient to 750 degrees C, plasticity is governed by dislocation shearing in both phases, where slip modes of gamma are < 110 >{111} and those of gamma' are < 112 >{111}, < 110 >{111} and < 110 > {001}. At moderate temperatures (850 degrees C <= T <= 900 degrees C), plasticity mainly involves microscopically uniform deformation of both phases. The matrix deforms first so that channels parallel to tensile direction are narrowed due to the Poisson's effect, after that deformation of gamma' follows. The active slip modes are < 110 > {111} for gamma, < 112 >{111}, < 110 >{111}, < 110 >{001}, and < 001 >{001} for gamma'. At temperature higher than 1000 degrees C, plastic strain is also derived from deformation of both phases, but deformation of the matrix plays critical roles, due to relatively weak strength of this phase. The operative slip modes are < 110 > {111} for gamma, but mainly < 110 >{001} and < 001 >{001} for gamma'. Our results clearly provide a comprehensive and multiscale (from micrometer to atomic) understanding on the deformation mechanism of Ni-based superalloys, which can be critically beneficial and offer mechanistic guidelines to design new/next generation superalloys. (c) 2021 Elsevier Ltd. All rights reserved.

Shock Response and Defect Evolution of Copper Single Crystals at Room and Elevated Temperatures

Shock-induced spall in copper: The effects of anisotropy, temperature, defects and loading pulse

Temperature Effects on Deformation Substructures and Mechanisms of a Ni-based Single Crystal Superalloy

The Effects of Defects on Copper Melting under Hydrostatic and Shock Loading

Collapse of stacking fault tetrahedron and dislocation evolution in copper under shock compression

Molecular Insight into the Deformation of Single Crystal Copper Loaded by High-Speed Shock Wave

Dislocation evolution and peak spall strengths in single crystal and nanocrystalline Cu

The effects of defects on melting of copper

Properties of a Laser Shock Wave in Al-Cu Alloy under Elevated Temperatures: A Molecular Dynamics Simulation Study

Atomic Insight Into Phase Transition Lowering in Shock Compressed Copper

Effects of Orientation and Vacancy Defects on the Shock Hugoniot Behavior and Spallation of Single-Crystal Copper

Study of the Thermomechanical Behavior of Single-Crystal and Polycrystal Copper

Pressure Sensitivity of Dislocation Density in Copper Single Crystals at Submicron Scale

Temperature Effect on the Deformation Behavior in Nanocrystalline Magnesium under Compression: An Atomistic Study

Shock Response of Copper Bicrystals with a ∑3 Asymmetric Tilt Grain Boundary

MD Simulation of a Copper Rod under Thermal Shock

Molecular Dynamics Simulation of Shock-Induced Collapse in Single Crystal Copper with Nano-Void Inclusion

Double-shock-induced Spall and Recompression Processes in Copper

Microstructures and mechanical properties of Cu-Sn alloy subjected to elevated-temperature heat deformation

Shock-induced Spall in Solid and Liquid Cu at Extreme Strain Rates

Melting of Cu under Hydrostatic and Shock Wave Loading to High Pressures