Abstract:It has been shown experimentally that the Hall-Petch relation of nanocrystalline (NC) metal will be broken down when the average grain size (d) is below a critical value, but the mechanism behind this remains to be quantitatively analyzed. In order to capture the subtle evolution of grain boundaries (GBs), we recently developed a novel algorithm by using moving least-squares (MLS) interpolant. Moreover, the phase field model is used to build NC copper with more natural and physical GBs for molecular dynamics (MD) tensile simulation. The results show that the variation of stress at GBs (σGB) and at grain interiors (σGI) in the elastic stage are in good agreement with previous study. The σGB exhibits periodic vibration, while σGI shows a linear behavior. From the stress distribution, we find that the increased σGB in one cycle can make the σGI increase. The microplasticity of GBs occurs when σGB increases to a peak value, which attenuates the stress concentration and then leads to the decrease of the σGB. Therefore, the σGI can be affected by the frequency of vibrated σGB. The fast Fourier transform (FFT) results show that the dominant frequency for the model with d of 13.8 nm is larger than that for other models, which causes a larger Young's modulus in the model. The GBs and GIs supplement each other during deformation: GBs providing an extra stress to GIs, GIs supplying the space for microplasticity of GBs. Besides, the fraction of deformed GBs and rotated GBs in the model are also large. GB activities are the results of overall microplasticity before σGB = σGI and deformation during the plastic stage. The rotated GBs results in the emission of many Shockley partial dislocation (partials) from GBs since they create larger paths for dislocation movement. Thus, many twinning boundaries (TBs) are generated in the model with d of 13.8 nm by partials gliding on the successive plane of adjacent stacking faults (SFs) structures, which plays an important role in work hardening of NC Cu.

Shock Response of Copper Bicrystals with a ∑3 Asymmetric Tilt Grain Boundary

The Shock-Induced Deformation and Spallation Failure of Bicrystal Copper with a Nanoscale Helium Bubble via Molecular Dynamics Simulations

Role of Grain Boundary Character on Bi Segregation-Induced Embrittlement in Ultrahigh-Purity Copper

Shock-induced Migration of Σ3〈110〉 Grain Boundaries in Cu

Molecular dynamics study on the grain boundary dislocation source in nanocrystalline copper under tensile loading

Dislocation evolution and peak spall strengths in single crystal and nanocrystalline Cu

Effects of Orientation and Vacancy Defects on the Shock Hugoniot Behavior and Spallation of Single-Crystal Copper

Molecular Insight into the Deformation of Single Crystal Copper Loaded by High-Speed Shock Wave

Atomistic Simulations of Tension Properties for Bi-Crystal Copper with Twist Grain Boundary

Intergranular fracture, grain-boundary structure, and dislocation-density interactions in FCC bicrystals

Influence of grain boundary activites on elastic and plastic deformation of nanocrystalline Cu as studied by phase filed and atomistic simulaiton

Thermal structural disorder and melting transition in high-angle grain-boundary: a molecular-dynamics study

Strain localization and fatigue cracking behaviors of Cu bicrystal with an inclined twin boundary

Quantifying the influence of grain boundary activities on Hall-Petch relation in nanocrystalline Cu by using phase field and atomistic simulations

Dislocation–grain boundary interaction-based discrete dislocation dynamics modeling and its application to bicrystals with different misorientations

On Intrinsic Brittleness and Ductility of Intergranular Fracture along Symmetrical Tilt Grain Boundaries in Copper

Evolution of dislocation mechanisms in single-crystal Cu under shock loading in different directions

Grain Boundary Sliding along Special Asymmetric Grain Boundaries in the Al Bicrystals: Atomistic Molecular Dynamics Simulation

Molecular dynamics simulation of grain boundary geometry on crack propagation of bi-crystal aluminum

Evaluation of Mechanical Properties of Σ5(210)/[001] Tilt Grain Boundary with Self-Interstitial Atoms by Molecular Dynamics Simulation

Effect of Inclination Angle on Mechanical Behaviour and Deformation Asymmetry in Aluminium Bicrystal