Abstract:High-gain Tm3+/Ho3+ co-doped optical fibers are urgently desired for high-repetition-rate mode-locked fiber lasers at >2 µm. Here, Tm3+/Ho3+ co-doped germanate glass with low hydroxyl (OH-) content was prepared by the conventional melt-quenching method combined with the reaction atmosphere procedure (RAP) dehydration technique. The doping concentrations of Tm2O3 and Ho2O3 are 2.5 mol.% (7.1 wt.%) and 0.25 mol.% (0.7 wt.%), respectively. Thanks to the high Tm3+ doping (7.1 wt.%) and low energy transfer efficiency (19.8%) between Tm3+ and Ho3+ ions, it enables achieving broadband and high-gain performance in the 2 µm region. Then a silicate-clad Tm3+/Ho3+ co-doped germanate core multimaterial fiber was successfully drawn by using the rod-in-tube method, which has a broadband amplified spontaneous emission (ASE) with a full width at half-maximum (FWHM) of 247.8 nm at 2 µm. What is more, this new fiber has a high gain per unit length of 4.52 dB/cm at 1.95 µm. Finally, an all-fiber-integrated passively mode-locked fiber laser was built by using this broadband high-gain fiber. The mode-locked pulses operate at 2068.05 nm, and the fundamental repetition rate is up to 4.329 GHz. To the best of our knowledge, this is the highest fundamental repetition rate for the all-fiber passively mode-locked fiber laser above 2 µm. These results suggest that the as-drawn multimaterial fibers with broadband high-gain characteristics are promising for high-repetition-rate ultrafast fiber lasers.

Silicate-clad Heavily Yb3+ Doped Phosphate Core Multimaterial Fiber with a High Gain Per Unit Length for Mode-Locked Fiber Laser Applications.

4.3 GHz fundamental repetition rate passively mode-locked fiber laser using a silicate-clad heavily Tm3+-doped germanate core multimaterial fiber

4.3 GHz fundamental repetition rate passively mode-locked fiber laser using a silicate-clad heavily Tm<sup>3+</sup>-doped germanate core multimaterial fiber

66 fs, 3 W all fiber Yb3+-doped mode-locked fiber laser

5 GHz Fundamental Repetition Rate, Wavelength Tunable, All-Fiber Passively Mode-Locked Yb-fiber Laser

Femtosecond Mode-locked Fiber Laser at 1 Μm Via Optical Microfiber Dispersion Management

Broadband High-Gain Tm3+/Ho3+ Co-Doped Germanate Glass Multimaterial Fiber for Fiber Lasers above 2 Μm.

220 W Raman Fiber Laser at 1.24 Μm Based on Phosphosilicate Fiber

Single-mode laser output in a Yb 3+ -doped fluorophosphate fiber

A Mode-Locked Yb 3+ -Doped Double-Clad Large-Mode-area Fiber Laser

Mode-locked Yb-doped fiber laser with graded-index multimode fiber as saturable absorber with gain management

Tm:YAG ceramic derived multimaterial fiber with high gain per unit length for 2 m laser applications

Tm:Yag Ceramic Derived Multimaterial Fiber With High Gain Per Unit Length For 2 Mu M Laser Applications

Silicate-clad highly Er3 +/Yb3 + co-doped phosphate core multimaterial fibers

Broadband 2 Μm Amplified Spontaneous Emission of Ho/Cr/Tm:YAG Crystal Derived All-Glass Fibers for Mode-Locked Fiber Laser Applications

Passively Mode-Locked Tm3+-Doped Fiber Laser With Gigahertz Fundamental Repetition Rate

108 fs high-power mode locked double-clad ytterbium-doped fiber laser using FePS3 saturable absorber

Yb 3+ heavily doped photonic crystal fiber lasers prepared by the glass phase-separation technology.

All-fiber Mode-Locked Gigahertz Femtosecond Laser at 1610 Nm Using a Self-Developed Long-Wavelength Gain Fiber

3 GHz, Fundamentally Mode-Locked, Femtosecond Yb-fiber Laser.

2 Μm Mode-Locking Laser Performances of Sol-Gel-fabricated Large-Core Tm-doped Silica Fiber