Abstract:High-gain Tm3+/Ho3+ co-doped optical fibers are urgently desired for high-repetition-rate mode-locked fiber lasers at >2 µm. Here, Tm3+/Ho3+ co-doped germanate glass with low hydroxyl (OH-) content was prepared by the conventional melt-quenching method combined with the reaction atmosphere procedure (RAP) dehydration technique. The doping concentrations of Tm2O3 and Ho2O3 are 2.5 mol.% (7.1 wt.%) and 0.25 mol.% (0.7 wt.%), respectively. Thanks to the high Tm3+ doping (7.1 wt.%) and low energy transfer efficiency (19.8%) between Tm3+ and Ho3+ ions, it enables achieving broadband and high-gain performance in the 2 µm region. Then a silicate-clad Tm3+/Ho3+ co-doped germanate core multimaterial fiber was successfully drawn by using the rod-in-tube method, which has a broadband amplified spontaneous emission (ASE) with a full width at half-maximum (FWHM) of 247.8 nm at 2 µm. What is more, this new fiber has a high gain per unit length of 4.52 dB/cm at 1.95 µm. Finally, an all-fiber-integrated passively mode-locked fiber laser was built by using this broadband high-gain fiber. The mode-locked pulses operate at 2068.05 nm, and the fundamental repetition rate is up to 4.329 GHz. To the best of our knowledge, this is the highest fundamental repetition rate for the all-fiber passively mode-locked fiber laser above 2 µm. These results suggest that the as-drawn multimaterial fibers with broadband high-gain characteristics are promising for high-repetition-rate ultrafast fiber lasers.

4.3 GHz fundamental repetition rate passively mode-locked fiber laser using a silicate-clad heavily Tm<sup>3+</sup>-doped germanate core multimaterial fiber

4.3 GHz fundamental repetition rate passively mode-locked fiber laser using a silicate-clad heavily Tm3+-doped germanate core multimaterial fiber

Broadband High-Gain Tm3+/Ho3+ Co-Doped Germanate Glass Multimaterial Fiber for Fiber Lasers above 2 Μm.

Passively Mode-Locked Tm3+-Doped Fiber Laser With Gigahertz Fundamental Repetition Rate

Silicate-clad Heavily Yb3+ Doped Phosphate Core Multimaterial Fiber with a High Gain Per Unit Length for Mode-Locked Fiber Laser Applications.

Highly Tm(3+) Doped Germanate Glass and Its Single Mode Fiber for 2.0 Μm Laser.

Tm^3+ Doped Lead Silicate Glass Single Mode Fibers for 20 Μm Laser Applications

Tm3+-doped Barium Gallo-Germanate Glass Single-Mode Fiber with High Gain Per Unit Length for Ultracompact 1.95 Μm Laser

5 GHz Fundamental Repetition Rate, Wavelength Tunable, All-Fiber Passively Mode-Locked Yb-fiber Laser

Efficient three-level continuous-wave and GHz passively mode-locked laser by a Nd3+-doped silicate glass single mode fiber

Tm 3+ doped lead silicate glass single mode fibers for 2.0 μm laser applications

1.95 μm kHz-linewidth single-frequency fiber laser using self-developed heavily Tm 3+ -doped germanate glass fiber

195 Μm Khz-Linewidth Single-Frequency Fiber Laser Using Self-Developed Heavily Tm^3+-doped Germanate Glass Fiber

Tm³⁺ doped barium gallo-germanate glass single-mode fibers for 2.0 μm laser.

Ultrafast Fiber Laser at 0.9 Μm with a Gigahertz Fundamental Repetition Rate by a High Gain Nd3+-doped Phosphate Glass Fiber.

Tm 3+ doped barium gallo-germanate glass single-mode fibers for 2.0 μm laser

Ultra-narrow linewidth Tm<sup>3+</sup>-doped fiber laser based on intra-core fiber Bragg gratings

1887 Nm Lasing in Tm3+-doped TeO2-BaF2-Y2O3 Glass Microstructured Fibers

Tm:YAG ceramic derived multimaterial fiber with high gain per unit length for 2 m laser applications

Single-frequency narrow-linewidth Tm-doped fiber laser using silicate glass fiber

Controllable structural tailoring for enhanced ∼2 µm emission in heavily Tm3+-doped germanate glasses.